Get complete information related to latest Rcc Collar Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rcc Collar Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rcc Collar Tenders.
Tender For corrigendum : enquiry for work of maintenance,shifting, laying termination of armored telephone cable over the existing cement concrete electric pole at approx. 8 meter above the ground level, double lashing by g.i.wire spaning.
Tender For supply of fencing material for plantation sites - fencing material -, galvanized steel barbed wire- mesh wire - galvanised steel wire of 2.5 mm diameterpoint wire - galvanised steel wire of 2.5mm diameterbarbs - sistance between two boards 75mmm, the barbs shall have four points and shall be formed by twisting two point wires each two turns. tightly around both the line wires making altogether four complete turns.standard - conforming to is-278-2009, galvanised steel chain link fence- mesh wire - galvanised steel wire of 3.15 mm diameterfabric size - 100x100 mm height - 150 cm, line wire - 2 numbers of line wires of 4.00 mm diameterstandard - conforming to is-2721-2003, with up to date amendments, rcc fencing poles height 2.0 mtype - straight, length - 2.00 m, dimensions - bottom 10x10 cm square, top 8x8 cm squarecement concrete mix - cement, sand and metal ration 1:2:4, with 12.5 nominal size coarse aggregate, sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15 of is:456:2000reinforcement - 4 round vertical bars of 6 mm diameter, 11 no of stirrups of 6 mm diameter round ms bars 20 cm centre to centre. hooks - 5 no. bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.manufacturing - in order to ensure desired compressive strength, rcc fencing poles should be compacted with the help of platform vibrators. surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm.
Tender For improvement of road by cement concrete (rmc m-30) work to maintain pot holes free road from ganga action plan road to khat pole under ward no-50 hmc (l- 815.00m, av.w- 3.10m) (2nd call)
Tender For electric cabling service - 3 phase heavy duty electric wiring xlpe insulated working voltage form 415 v to 11 kv as per is 1554 along with associated items and civil work as per schedule of work attached; copper and aluminium coth conductor material as per schedule of work-1 supply, laying and testing cable xlpe insulated ,screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sq mm 3 1/2 core. rm 280 2 excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, or for shafts, wells, cesspits, manholes, pier holes, etc. and not exceeding 10 sqm on plan and getting out in soft /loose soil complete all as specified and as directed cum 60.75 3 returning filling including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed. cum 60.22 4 removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. cum 0.53 5 supply and laying ldpe pipes 50 mm dia with all fitting ,laid in ground for crossing the cables across the road by cutting existing road , under floor ,wall by cutting existing floor and making good the road /floor and wall surface after laying of pipe . rm 270 6 cement concrete 1:3:6 type c-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete for making foundation for mounting flood light /bollard light fitting/finishing of roads/floors etc . cum 4.05 7 m &l for cutting of road /floor surface 30cm girth, up 45 cm width for croosing the pipe line /laying of cable acroos the road all as specified and directed. rm 30 8 s & f distribution boards epoxy powder coated tp & n (vtpn mccb db) 8 way ,415 volts ,fabricated from minimum 1.6 mm thick crca sheet and fixed/ flush to wall and suitable for universal mounting with 250 amps fully insulated copper bus bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for ip-43 db,s protection, suitable for fixing fp mccb 100/125 amps as incomer complete all as specified and directed. note: suitable mccb and outgoing mcbs will be measured separately under relevant items of this schedule each 1 9 s & f mccb ,4 pole 100 a , 415 volts with rupturing capacity 16 ka with thermal-magnetic release and adjustable overload setting of following capacity complete all as directed. each 1 10 s & f bus bar chamber with 4 nos copper busbar 150 amps including mccb 100a 16ka 415 volts each 1 11 s & f sub main wiring with 4x16 sqmm +1 x 10 sqmm run pvc insulated unsheathed frlsh cable 1100 volt grade, with multi stranded copper conductor drawing in concealed pvc conduit not less than 25mm dia complete all as specified and directed. rm 50 12 s & f sub main wiring with 2x4 sqmm +1 x 4 sqmm run pvc insulated unsheathed frlsh cable 1100 volt grade, with multi stranded copper conductor drawing in concealed pvc conduit not less than 25mm dia complete all as specified and directed. rm 200 13 s & f modular rectangular block for mounting,modular switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175mm x 175 mm and 50 mm deep each 25 14 supply and fix modular switch 1 way 16a, 1 module with indicator lamp each 25 15 supply and fix modular socket 6a/16a, 2/3 pin combined 2 module each 25 16 material and labour for earthing with galvanised steel earth plate electrode 60cmx60cmx 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 32 x 6 gi strip by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to
Tender For custom bid for services - the diversion of the 1 kilometer 3 3 overhead power line at dhoptala ocm of sasti sub area-1 "erecting rolled steei joist (girder) pole 200 * 100 mm. (25, 0kg / m) with provided base plate in provided foundation as per specification no. , ", 2 making cement concrete foundation including excavation (60 * 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 * 25mm stone metal, 45 cm x 45 cm x 45 cm 145 cm dia. x 45 cm. height plinth duly plastered, with necessary joating ang hoisting complete. (tor upto 9 m poles) , 3 "supplying and erecting g.l. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 * 6 mm., straining screws. g.l. stay wire 7/8 swg.g.i. stay rod 20 mm x 1.8m length and pole clamps duly erected in provided cement concrete foundation., ", 4 "making cement concrete foundation including excavation ( 60 * 60 * 150) cim deep in 1:3:6 cement concrete, (20 to 25) min stone with necessary curing and finishing complete. (for stay). , ", 5 ereeting acsr conductor of size-6/1-4.72 mm (dog) complete. (394 kg(km) as per specification no oicon/acsr, 6 "supplying and erecting v cross arm with ism channel of, 75x40x6mm for 11kv ht oil line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220mm bent at angle of 60 degree keeping base 305mm and the total vertical height of v cross arm as 460mm, and fixed on pole with ms clamp of 80x10 mm, nut bolts, washers complete as per specification no.oh-pl/vcaerecting acsr conductor of size-6/1-4.72 mm (dog) complete. (394 kg/km) as per specification no. ohcon/acsr", 7 supplying and erecting porcelaindise type insulator 45knwith necessary hardware suitable for ikv line, complete as pe specification no. , 8 supplying and erecting porcelain pin type insulator with g.l. pin suitable for 11kv line, complete as per specification no., 9 "supplying, installing and testing pipe type earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.1. rod complete with all accessories of gl materials & recording the results as per specification no. , ", 10 paintingofsteeltubular/rail/rsjpoleabove6.0mlengthalongwith street light polebrackets, clamps etcby scrapping the existingpaint complete asper specification no., 11 supplying and erecting anti climbing devices, fabricated from pole clamps of ms flat 40x5 mm, with drooping spikes 15 cm, in length, welded to it and erected on pole complete.
Tender For construction work of cement concrete road with tri-mix, road circle, parking shed, store room, pipe culvert, led street light with pole and high mast tower (second call) as per various location chart at, vallabhipur under swarnim jayanti mukhya mantri saheri vikash yojana (udp-88) year-2024-25.
Tender For providing and supplying of material as per list - providing and supplying of material as per list, cement opc 33 grade, cement opc 43 grade, cement opc 53 grade, sand (narmda), 6mm crused stone aggregate (metal), 10mm crused stone aggregate (metal), 12mm crused stone aggregate (metal), 20mm crused stone aggregate (metal), 65mm metal (b.t.), 40mm crused stone aggregate (metal), crm material, stone dust (churi), copra/moorum, boulder, brick size in cm (19x9x9), g.i. sheet corrugated, asbestos sheet corrugated, mild steel and medium tensile steel bars (08mm, 10mm,12mm, 16mm, 20mm, 25mm), g.i. chain link fabric fencing (mesh size 25x25mm), g.i. chain link fabric fencing (mesh size 50x50mm), g.i. barbed wire fencing, rcc hume pipe 150mm dia (np-2) pipe, rcc hume pipe 225mm dia (np-2) pipe, rcc hume pipe 300mm dia (np-2) pipe, rcc hume pipe 450mm dia (np-2) pipe, rcc hume pipe 450mm dia (np-3) pipe, rcc hume pipe 600mm dia (np-2) pipe, rcc hume pipe 600mm dia (np-3) pipe, rcc hume pipe 900mm dia (np-2) pipe, rcc hume pipe 900mm dia (np-3) pipe, rcc hume pipe 900mm dia (np-4) pipe, rcc hume pipe 1000mm dia (np-2) pipe, rcc hume pipe 1000mm dia (np-3) pipe, rcc hume pipe 1000mm dia (np-4) pipe, rcc hume pipe 1200mm dia (np-3) pipe, rcc hume pipe 1200mm dia (np-4) pipe, rcccollar 150mm dia, rcccollar 225mm dia, rcccollar 300mm dia, rcccollar 450mm dia, rcccollar 600mm dia, rcccollar 900mm dia, rcccollar 1000mm dia, rcccollar 1200mm dia, marble stone (16mm to 18mm thick), granite stone (18mm thick), kota stone (25mm thick), distemper oil emulsion, synthetic enamel paint, plastic emulsion paint for inner use, putty, oil bound distemper, flag stone 40mm thick, flag stone 50mm thick, dansha patther (diffrent size), door (m.s., complete with fitting), window (m.s., complete with fitting), channel section (different size), pvc pipe 4" dia, pvc pipe 6" dia, pvc pipe 8" dia, binding wire, mixer machine (with operator, deisel, oil), road roller 8 to 10, vibrator roller, hydrated lime, fencing rcc standard post (100mm x 100mm), 1.80 m depth, fencing angle iron post isi (40mm x 40mm x 5mm), fencing angle iron post isi (50mm x 50mm x 5mm), poklane machine with diesel-driver, jcb machine with diesel-driver, tractor trolly with diesel-driver (2.80 cum to 3.00 cum capacity and minimum usage 8 hours per day), truck/dumper with diesel-driver (18.00 cum to 20.00 cum capacity and minimum usage 8 hours per day), black cotton soil, m.s. frame with angle complete (all sizes as per requirement), m.s. chamber with angle complete (diffrent sizes as per requirement)