Latest rcc grating Tenders | Government rcc grating Tenders

CTN :41272076

08 Aug, 2025 6.69 Lacs

Kavaratti - Lakshadweep

Tender For construction of segregation shed with material recovery facility centre for plastic waste management at agatti (re tender-i) - surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, providing and laying cement concrete 1:4:8 ( 1 cement: 4 river sand: 8 granite chips ) foundation and plinth., providing and laying cement concrete block (machine moulded) masonry in in foundation and plinth in cm 1:6 with blocks of size 40cmx20cmx15cm, providing and laying half block masonry in super structure above plinth level upto floor five level cement mortar 1:4 ( 1 cement 4 metal sand ) cement concrete block of size 40cmx10cmx15cm, 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand), providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer g.i.pipe, steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. hot finished welded type tubes, providing aluminium sheet roofing fixed with galvnized iron jor l hooks and 8mm dia c.i plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick., cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc.complete a) 40mm thick with 20 mm nominal size stone aggregate, providing ridges or hips in aluminium sheet roofing with g.i /j or l hooks bolts and nuts 8 mm dia g.i plain bitumen washers complete. 0.56mm thick., providing and fixing m.s welded mesh 50mmx50mm in position and applying a priming coat of approved steel primer with all necessary nails

CTN :41271049

06 Aug, 2025 9.96 Lacs

Jaipur - Rajasthan

Tender For supplying and fixing of gl chain link fencing of required width in mesh including strengthening with 2 mm dia gi wire/ g.i. staples/g.i.u-nails/ nuts bolts with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in m15 grade cement concrete 30cmx30cmx60cm, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall bestrutted on both sides and end post on one side only etc complete as required and as per direction of engineer-in-charge.

CTN :41272547

07 Aug, 2025 13.07 Lacs

Multi City - Karnataka

Tender For material supply for construction of solid waste disposal unit of ramadurga village - rivapolyenthylene water storage tank of specified capacity l, rivahom of cutting and grinding machine 1, rivamechanic class iimechanic hmp grade ieme grade, rivaanticorrosive bituminous paint black, rivaball bearing hinges heavy duty, rivacast iron spike, riva40 6 mm ms plates, riva36 mm 6mm ms plates, riva16 16 mm ms square rod, riva50 mm dia ms hollow pipe b class 14 gauge, rivachlorinated polyvinyl chloride cpvc pipe 25 mm outer dia, riva100mm s or p trap, rivaindian type water closet of size 580 mm of specified make with footrests, rivatractor 40 hp, rivagravel 2.36 mmmurrum, rivapvc pipe of 4kgcum110 mm, rivalabour charges for handing errection of rcc rings etc 5, rivatransportation charges of rials beyond 5 km 10, rivafabrication charges, rivacost of 6 5mm ms coil, rivarcc cap 1000 mm dia 100 mm thick, rivatools & plants and electrical charges 2, rivaenamel metal paint, rivapainter class i, rivaready mi primer paint ready mi red lead paint, rivahom of cutting and grinding machine, rivaadd, rivahom of welding and grinding machine, rivawelder grade i, rivacorbon electrodes, rivaanchor bolts 750mm, rivabase plate base plate, rivagusset plates 6 mm thick, rivams angle iron 40mm 40mm 6mm 23 mtr in length at 3 5 kg per mtr, rivams angle iron 50mm 50mm 6mm 33.8 mtr in length at 4 5 kg per mtr, rivaweld mesh 75 25 mm of 6g to 10g, rivaadd providing and removing scaffolding at 3 on labour, rivaunit cost as per the specification, rivamathinandi wood scantling, rivaadd cutting and other wastage 5, rivamathinandi wood planks for panels 25 mm thick, rivaburnt bricks class 35 non modular, rivabinding wire, rivatmt bars fe 500, rivajungle wood runners and planks, rivastone chistler class ii, rivamason class ii with tools, rivamason class i with tools, rivamier concrete small used in culvert, rivaboulders, rivabond stone 20 20 45 cm, rivasize stone 20 20 25 cms, rivagranitetrap broken metal 100 mm and down size, rivaadd handling loading and unloading at 2 on rial, rivacasurina poles 100 150 mm, rivasilver oak or equivalent planks 38 mm thick, rivahom of vibrator 0 71 days, rivaplasticizer super plasticizer, rivaadd watering charges at 1 on rial, rivamier concrete 1 cum capacity, rivaportland cement, rivacoarse sand zone iii, rivabroken stone aggregate 12 mm to 10 mm size, rivabroken stone aggregate 20 mm size, rivabroken stone aggregate 40 mm size

CTN :41136472

01 Aug, 2025 NA

Imphal - Manipur

Tender For bid to ras supply of coir mattress of size 1.83m x 0.9m x 75mm thick comprising of 50mm thick high density coir with hessian border pasted with 25mm , pedestal fan 400mm sweep , wall mounted fan 300mm sweep conforming to is , exhaust fan 300mm sweep conforming to is , triple layer hdpe water storage tank cylindrical vertical with closed top 1000 ltrs capacity conforming to is specification , hdpe tarpaulin 18 ft x 24 ft , mild steel door wire mesh weight not less than 2.20 kg per sqm , led batten surface 4 ft long 18w output 1600 lumens per watt with suitable powder coated frame end caps and connector , led bulb 18w 220-240 volt , app water proofing membrane 3 mm thick 1m wide 10 m long , hdpe tarpaulin 30 ft x 30 ft , security light fitting for 65 watt led , pvc insulated sheathed unarmoured cable 16sqmm 4 core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , change over switch 63 amp four pole , pvc insulated sheathed unarmoured cable 6sqmm twin core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , ordinary portland cement 43 grade in hdpe bags of 50kg each confirming to is 269-1976 , coarse sand dimapur sand conforming to is 383 -1978 , coarse aggregate crushed stone 20mm graded conforming to is 383-1979 , bricks sub class b old size best locally available minimum compressive strength 75 kg sqcm water absorption not more than 20 percentage , iron angle 10 ft long thick of size 50mmx50mmx3mm , self tapping screws with ppdm washer 50mm long , ms square pipe 1 inch x 1 inch thickness 5mm , ms square pipe 2 inch x 1 inch thickness 5mm , ms square pipe 2 inch x 2 inch thickness 5mm , ms square pipe 3 inch x 3 inch thickness 5mm , hdpe sand bags of size 14 inch x 36 inch weight not less than 60 gms , plywood commercial 18 19mm bwr 8 ft x 4 ft , plywood commercial bwr grade isi marked of size 8 ft x 4 ft x 12mm thick , synthetic enamel paint high gloss superiour quality white colour , synthetic enamel paint high gloss superiour quality green colour , synthetic enamel paint high gloss superiour quality black colour , synthetic enamel paint high gloss superiour quality red colour , synthetic enamel paint high gloss superiour quality blue colour , synthetic enamel paint high gloss superiour quality yellow colour , thinner , distemper oil emulsion acrylic distemper , painting brush 100mm standard quality , painting brush 75mm standard quality , cp cast copper alloy pillar cock 15mm bore , mcb 32 amp dp 240 volts , pvc insulated sheathed unarmoured cable 10sqmm twin core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , non skid ceramic coloured tiles of size 600mm x 600mm x 9-10mm thick , metal cutter disc 6 inch dia , metal cutting disc 14 inch dia , welding rod pkt of 100 electrodes , mild steel corrugated galvanised cgi sheet 8 ft x 3 ft x 0.63 mm thick isi marked , mild steel corrugated galvanised cgi sheet 10 ft x 3 ft 0.63 mm thick isi marked , mild steel corrugated galvanised cgi sheet 12 ft x 3 ft 0.63 mm thick isi marked , ppgi ridge cover 1.5 ft wide 0.63mm thick , acrylic sheet 3mm thick for window panes 8 ft x 4 ft , four layer hdpe water storage tank cylindrical vertical with closed top 2000ltrs capacity conforming to is specification , hand gloves , puf gun machine , lead acid battery 12v 180ah //bid details 2 / 40

CTN :41263195

30 Aug, 2025 20.00 Lacs

Sehore - Madhya Pradesh

Tender For annual tender for material supply for different pwd work at municipal council sehore - annual tender for material supply for different pwd work at municipal council sehore, murram ( ), 6 mm churi ( ), mixed material ( ), sand ( ), 20 mm crussed stone ( ), cement bag (opc) isi mark, cement bag (ppc) isi mark, 40 mm crussed stone ( ), np3 class pipe 300mm, np3 class pipe 450mm, np3 class pipe 600mm, np4 class pipe 1000mm, pre cast boundry wall, barbed wire, gi square mesh, rcc pole, m.s. (mid steel) hollow pile, steel work riveted,welded or bolded, galvanised iron (gi) sheet 0.8mm, pvc pipe 4in 4kg/cm2, pvc pipe 6in 4kg/cm2, pvc pipe 8in 4kg/cm2, pvc pipe 10in 4kg/cm2

State Government

CTN :41264616

11 Aug, 2025 NA

Rewa - Madhya Pradesh

Tender For purchasing fencing item for divisional forest office rewa - laying and jointing pvc pipe. heading, pre stressed reinforced cement concrete fancing pole size 100x100mm of 2mtr. length, galvanized steel barbed wire -line wire - galvanised steel wire of 2.5 mm diameterpoint wire - galvanised steel wire of 2.5 mm diameterbarbs - distance between two barbs 75mm, the barbs shall have four points and shall be formed by twisting two point wire each two turns, tightly around both the line wire making altogether four complete turns.standard - conforming to iso - 9001:2015 with up to date amendments., galvanize steel chain link fence fabric - size 100x100 mm, 4 mm dia mesh wire & width 1.5 m conforming to is 2721 2003 upto date amendments.

CTN :41252660

06 Aug, 2025 12.57 Lacs

Koppal - Karnataka

Tender For supplying materials to solid waste management unit at kolur village of koppal district - broken stone aggregate 40mm size., broken stone aggregate 20,mm size., broken stone aggreate 12, mm to 10,mm size, coarse sand (zone -lll), portland, cement., mixer (concrete) - 1,cum capacity., add watering charges, at 1 % on material., silver oak or equivalent, planks, jungle wood,runners and planks, casurina poles, 75 - 100 mm dia, add handling , loading and unloading at 2 % on material, casurina poles 100 - 150,mm, plasticizer, / super plasticizer., hom of vibrator 0.71, days., size stone, 20 x 20 x 25 cms., bond stone 20 x 20 x 45, cm, boulders,.,, mixer ( concrete small, used in culvert), mason class l (with tools), mason class ll (with tools), stone, chistler class ll, add watering, charges at 1 % on labor, tmt bars fe, 500, binding, wire, burnt bricks class 35, (non modular), add handling , loading and unloading at 1 % on material, t section,, mullion section,, ms clamps,, handles,, hinges 5 heavy duty,, stays,, tw beading for fixing glass,, reeded glass 2 mm thick,, z section,, fitter class l, welder grade, l, add,., ready mix primer paint (ready miix red lead paint), add wire brush, fine steel wool, putty , sand paper , at 3 % on cost of paint, painter class l, add providing and removing scaffolding at 3 % on labour, mathi/ nandi wood planks for panels 25 mm thick, add cutting and other wastage 5 %, hom, of machinaries for planing, mathi/nandi wood, scantling, broken granite, metal 12.5 mm., broken granite, metal 10 mm., weld, mesh 75 x 25 mm of 6g to 10g., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length, at 4.5 kg per metre., ms angle iron 40mm x 40mm x 6mm, 23 metre in length, at 3.5 kg per metre., gusset plates, 6 mm thick., base plate / base plate.,, anchor, bolts 750mm.,, corbon, electrodes, hom of welding, and grinding machine.,, hom of cutting and grinding machine., enamel metal, paint, add brush at 1 % on cost of paint, tools and plants and electrical charges at 2%, unit cost as per the, specification., enamel paint.,, add brush , putty , sand paper , roller at 5 % on cost of paint, dia 50mm ms hollow pipe b class 14 gauge,., ms square rod,. 16 x 16 mm, ms plates,. 36 mm x 6mm, ms plates,. 40 x 6 mm, cast iron spike,., ball bearing hinges heavy duty.,, anticorrosive,. bituminous paint (black), mechanic class ll / mechanic hmp grade l/eme grade, hom of cutting,. and grinding machine - 1, tools and plants at 2 % on material, transportation loading,. and unloading at 1% on material, rcc cap 1000 mm dia , 100 mm thick, transportation charges of materials beyond 5 km at 10 %, cost of 6.5 mm m, s. coil, fabrication, charges, pvc pipe of 10kg cum,140 mm,., indian type water closet, of size 580 mm of specified make with footrests, trap, 100 mm, s or p, add white lead paint , gasket , cement , sand for making good the wall and floor at 2 % on material, tractor - 40 hp,., electrification,., display board,.

CTN :41246914

08 Aug, 2025 5.23 Lacs

Siddapur - Karnataka

Tender For siddapur gram panchayat community based poultry shed construction - gpsiddapur17 display board, gpsiddapur17 handling loading and unloading 3percantage on material, gpsiddapur17 labour charges for lifting and placing in position and making connection at 7percantage on material, gpsiddapur17 polyenthylene water storage tank of specified capacity l, gpsiddapur17 add brush, putty, sand paper, roller at 5percantage on cost of paint, gpsiddapur17 plastic emulsion paint, gpsiddapur17 painter class i, gpsiddapur17 add wire brush fine steel wool putty sand paper at 3percantage on cost of paint, gpsiddapur17 add handling loading and unloading at 1percantage on material, gpsiddapur17 add handling loading and unloading at 2percantage on material, gpsiddapur17 plumber, gpsiddapur17 add 2percantage for fittings and wastage charges, gpsiddapur17 gi pipe 50 mm dia b class, gpsiddapur17 weld mesh 75 x 25 mm of 6g to 10g, gpsiddapur17goods unit cost as per the specification, gpsiddapur17 add providing and removing scaffolding at 3percantage on labour, gpsiddapur17 gravel 2.36 mm/murrum, gpsiddapur17 mason class i with tools, gpsiddapur17 stone dresser with tools, gpsiddapur17 burnt stone slabs 10 cms thick, gpsiddapur17 burnt bricks class 35 non modular, gpsiddapur17 hom of vibrator 0.71 days, gpsiddapur17plasticizer or super plasticizer, gpsiddapur17 add sundries charges at 2 percantage on material, gpsiddapur17plasticizer or super plasticizer, gpsiddapur17 casurina poles 100 - 150 mm, gpsiddapur17 solid concrete blocks 40 x 15 x 20 cms-4.00 n sqmm, gpsiddapur17 mixer concrete small used in culvert, gpsiddapur17 boulders, gpsiddapur17 bond stone 20 x 20 x 45 cm, gpsiddapur17 size stone 20 x 20 x 25 cms, gpsiddapur17 add watering charges at 1 percantage on material, gpsiddapur17 mixer concrete 1 cum capacity, gpsiddapur17 portland cement, gpsiddapur17 coarse sand zone iii, gpsiddapur17goods broken stone aggregate 12 mm to 10 mm size, gpsiddapur17goods broken stone aggregate 20 mm size, gpsiddapur17goods broken stone aggregate 40 mm size

State Government

CTN :41240665

06 Aug, 2025 NA

Gajapati - Odisha

Tender For providing ac sheet, chain linked wire mesh, welded mesh, cement, j hooks and washer, binding wire, etcas per the specification given below under the "special programme for promotion of integrated farming in tribal areas in mohana and r.udayagiri blocks of gajapati district" by the district manager odisha agro industries corporation i.t.dat.sunari street (near railway station) paralakhemundi, of gajapati district.

CTN :41203405

14 Aug, 2025 NA

Kamorta - Andaman And Nicobar Islands

Tender For supply of materials/items for mgnrega works nancowry block for fy-2025-26 - rate for accssible ares (kamorta & nancowry islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow block 40x15x20 cms, cement concrete hollow block 40x10x20 cms, m.s flat various size, m.s angle various size, tmt steel bars various size, binding wire good quality, nailsvarious size, nut & bolt various size, j hook various size, coach screw with cap washer 2 , self type screw various sizes as per requirement, ply wood anti-termite (commercial), approved/ reputed brand. 12 mm thick, ply wood water proof & factory painted (marine), approved/ reputed brand. 19 mm thick, pre painted galvanised (ppgi) roofing sheet 9 feet, ppgi plain sheet 2 feet width, cement primer (reputed brand.) good quality, wood primer (reputed brand.) good quality, oil bound distemper (reputed brand.) good quality, synthetic enamel paint (reputed brand) good quality, painting brush (amar) various sizes, sliding bolt make classic 300x16mm, window handles (anodized) various sizes as per requirement, iron hinges various sizes as per requirement, tower bolt (anodized) various sizes as per requirement, w/c pan complete set make hindustan or any other reputed company indian type (460x440) mm, pvc pipe make hindustan 100 mm, pvc pipe 3 inch, thinner make sheenlac good quality, steel hand saw for wood good quality, saw file (triangular) 4 inch, augur 3/8 inch, wooden shuttering with propping good quality wood, g.i. wire mesh of dia. 4mm, pvc coated to achieve outer dia. not less than 5mm in required colour, shade and height. (reputed brand) mesh size 100x100mm, pre cast rcc post for fencing top width-12cm, bottom width-15cm, height-1.70m, main bars-4 nos.10mm dia, stirrups-8mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe. inner dia-1.00m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe inner dia-0.50m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc ring for c/o ring well inner dia-2.0m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, plump bob good quality, sledge hammer good quality, ball peen hammer good quality, try square good quality, trowel good quality, mixing pan good quality, pvc cowl 100mm, pvc door frame make rajshree 50x47mm wide 5mm thick, pvc door 30x50mm wide 5mm thick and 75mm wide pvc sheets for top rail, preparation & installation of citizen information board fully metallic board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully metallic board of (2x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully wooden board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix proper footing support., mooram good quality, epoxy paint standard, red oxide paint standard, welding charges arc welding, mixer machine (on hire) 10/7 cubic feet or 1 bag capacity, hiring of road roller8 tonne, precast rcc circular slab of 1.44 sqm,thickness-5 cm, main bars-8 mm dia, distribution bars-8mm dia @100mm c/c spacing, rcc mix-1:1.5:3, rate for inaccssible areas (katchal, teressa & chowra islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow b

Rcc Grating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government