Latest rcc pale fencing Tenders | Government rcc pale fencing Tenders

Central Government / Public Sector

CTN :40685457

26 Jun, 2025 24.49 Lacs

Panipat - Haryana

Tender For custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Central Government / Public Sector

CTN :40681442

03 Jul, 2025 NA

Guntakal - Andhra Pradesh

Tender For guntakal division - stenciling of masts, painting of atds, bonds, power transformers, fencing panels, and switchgear equipment in gy-pdl, gdr-ru-tpty-kpd & gtl-dhne-ndl sections.

CTN :40662495

10 Jul, 2025 1.99 Crore

Raichur - Karnataka

Tender For development work of mavinakere park under raichur municipal corporation (road work, foot-path interlocking fence work and installation of decorative electric poles and electric lights, childrens play equipment, high mast light, chain link fencing work and other works on the bank of the lake, installation of benches, installation of gates and welcome arch work and coloring of existing statues.

Central Government/Public Sector

CTN :40610919

16 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2)-g-schedule for pre monsoon repair & maintenance of g.d. site at sandalpur the. khategaon, dist. dewas for the year of 2025-26- 1 ordinary shrub jungle (area below 25% covered by shrubs) clearance involving removal of grass, shrubs, bushes and twigs including rooting out & disposal etc. complete. (wrd sor 9.01/p. 133) 53000 sqm., 2 fly levelling for fixing temporary bench marks (wrd sor 1.08/p.8) 2 k.m., 3 chain and compass survey (wrd sor 1.06/p. 8) for headworks (wrd sor 1.06.1) 1.5 k.m., 4 levelling for canal works (wrd sor 1.10/p. 8-9) below 15 m interval for command survey and canal survey, including survey for c.d. work (wrd sor 1.10.1) 2.5 k.m. 0 0 5 maintenance of gravel road including making up the loss of profile, rectifying corrugated surface, filling up of depressions, pot holes and erosion gullies by adding fresh material and compacting it with appropriate equipment or to strip excess of material from the road surface as per drawings and technical specification clause 1906 (mprrda sor 15.4) rate per sqm for depression upto 7.5 cm 5500 sqm. 0 0 6 fencing with r.c.c. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum) between the two posts fitted and fixed with g.i. staples on wooden plugs or g.i. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of r.c.c. posts, struts, earth work and concrete to be paid for separately) with gi barbed wire. (pwd sor 10.31/ 312) 1050 m. 0 0 7 demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of engineer -in - charge. (pwd sor item no. 15.2/p. 523) nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). (pwd sor item no. 15.2.1/p. 523) 4.55 cum. 0 0 8 fabrication and installation of reinforcement cement concrete gauge post of size 15 cm x 10 cm (one side tapered in 5 cm length) made with m - 15 concrete mix (with aggregate 20 mm nominal size) 1.80 m long. at river banks including cost of civil works in foundation embedded in m -15 reinforced cement concrete pedestal block of size 60 cm x 60cm x 60 cm including the of steel reinforcement, centring, shuttering, finishing, reinforcement over the m -7.5 (with aggregate 40 mm nominal size) cement concrete base of size 80 cm x 80 cm x 15 cm with 12 mm thick plastering complete and marking the gauge with synthetic enamel with standard metric gradation of 5 mm thickness in black & white alternately & red synthetic enamel of 5 mm width at every 100 mm etc complete (center line) (wrd sor 1.30/p. 13) 26 each 0 0 9 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level : (pwd sor 4.1/p. 40) m-15 grade concrete (4.1.1.3) 14.76 cum. 0 0 10 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer -in - charge) 0.50 mm + 0.05 %, total coated thicknesswith zinc coating 120 gsm as per is: 277 in 240 mpa steel grade, 5 -7 micronsepoxy primer on both side of the sheet and polyester top coat 15 -18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer -in - charge. the sheet shall be fixed using self-drilling /selftapping screws of size (5.5x 55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (pwd sor item no. 24.11/p. 725 -726) 34 sqm. 0 0 11 providing and fixing precoatedgalvanised steel

Central Government / Public Sector

CTN :40441016

23 Jun, 2025 1.11 Crore

Haldia - West Bengal

Tender For corrigendum : custom bid for services - 9040c25b52 annual repair contract for process scheme jobs in instrumentation department on open tender basis- equipment hiring charges - 1 hydra 10t (hired) 4640, 2 hydra 15t (iocl owned) 4944, 3 hydra 25t (hired) 5551, 4 crane 50t (hired) 10785, 5 crane 75t (hired) 10785, 6 forklift ( iocl owned) 1738, 7 180t crane (hired) 18296, 8 articulated boom (hired) 2208, 9 tractor and trailer (hired) 2076, supply of materials for secured advance- civil items: a. items against which secured advance can be granted :, 1. bricks, 2. stone and brick aggregates, 3. stones, 4. finished products of brass, iron or steel such as doors and window frames,, wiremesh, gate, gi sheets., 5. pre-cast rcc products such as pipes & fittings, jail, water storage tanks., 6. doors and windows fittings., 7. pipes and sanitary fittings of gi, ci, sci and hci., 8. metallic doors / windows., 9. ms gratings., 10. reinforcement bars., 11. hydraulic door closers., 12. structural steel., 13. flushing cisterns., 14. ci valves, sluice gates etc., 15. fencing materials chain-link / barbed-wire etc., 16. anchor bolts., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. kitchen sink china vitreous, flush back for wash basin vitreous china water closet, and pedestal type water closet vitreous china, urinals., 2. glazed tiles, terrazo tiles and similar articles., 3. marble slabs., 4. asbestos cement products., 5. finished timber products such as doors, windows, flush doors, particle boards, (subject to the mandatory tests being satisfactory)., 6. bitumen in sealed drums., 7. bitumen felt., 8. polythene pipes & fittings, sanitary fittings and pipes of sw, porcelain and, chinaware materials., 9. laminated / safety one way vision and bullet proof glasses., 10. chemicals required for anti-termite treatment (in sealed drums)., 11. paints, varnishes, distempers, pigment, spirit., 12. cement tiles., 13. acid proof tiles., 14. bitumen products required for mastic flooring etc., 15. water proofing compound such as cico etc., 16. materials for epoxy finishing etc., electrical items, a. items against which secured advance can be granted :, 1. steel conduit, 2. gi pipes, 3. ci boxes, 4. ic boards., 5. switchgears (air circuit breakers and air break switches), 6. a c s r conductors, 7. a.c. plant & machinery., 8. pumps, 9. generating sets (without oil), 10. gi strips., 11. street light poles (steel), 12. cable trays., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. transformers, 2. switch gears ( oil filled), 3. lt & ht cables, 4. fans, 5. store & dry batteries, 6. insulation tapes., 7. epoxy cable compounds., 8. electric light fittings., 9. wood battens, casing & capping and wooden boards., 10. flexible wires., 11. pvc materials, 12. rubber materials, 13. glass wools, thermocol and other insulating materials., 14. porcelain ht and lt insulators., 15. electric heat tracing tapes., mechanical items, a. items against which secured advance can be granted :, 1. structural steel., 2. plates., 3. pumps / motors, vessels etc., diesel engine, side entry mixers, suction heaters &, any other mechanical equipment., 4. refractory bricks., 5. ss foil., 6. pipes / pipe fittings., 7. gratings., 8. valves, hydrants, monitors., 9. aluminium sheet., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. bitumen, 2. wrapping & coating material, 3. primer / paint, 4. foam / foam seal material, 5. guniting material, 6. insulation & refractory materials other than bricks., instrumentation items, a. items against which secured advance can be granted :, 1. structural steel, 2. ms sheet / gi sheet, 3. pre-fabricated trays, 4. pipes / tubes / fittings, b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. ss

CTN :40584872

18 Jun, 2025 10.00 Lacs

Balaghat - Madhya Pradesh

Tender For supply of providing plants for tree plantation, irrigation equipment, fencing poles, bamboo, etc. at nagar palika parishad balaghat

Central Government/Public Sector

CTN :40566431

23 Jun, 2025 NA

Kamrup - Assam

Tender For supply of fencing consumables equipment - bf epee blade fie maragine ed27 , bf foil blade fie maraging ef 27 , electrical jacket for foil 1145h , foil or sabre body wire fk t , epee body wire transparent plug dk t , foil mask 1600 n fie ami fl , epee mask 1600 n fie amid

Central Government/Public Sector

CTN :40476465

12 Jun, 2025 NA

Multi City - Multi State

Tender For repainting of equipment , curved surface , chain link fencing etc. in zone -1&2,3&4 and expansion zone of ced

State Government

CTN :40455702

17 Jun, 2025 10.00 Lacs

Rewa - Madhya Pradesh

Tender For solar electric fencing system annual maintenance of all equipment

State Government

CTN :40393999

09 Jun, 2025 1.77 Crore

Malda - West Bengal

Tender For construction of control room building, equipment foundation, switchyard development, retaining wall, boundary wall, fencing wall, approach road and sinking of 1 no tube well (100mmx50mm) dia including submersible pump motor 1.5 hp at chandipur 33/11

Rcc Pale Fencing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors