Latest rcc pipeline Tenders | Government rcc pipeline Tenders

Corporations And Associations And Others

CTN :43514578

16 Jan, 2026 33.81 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments and construction of epdm flooring under open gym equipment in shahdara south zone, under mplads funds for various locations of parks in municipal corporation of delhi. - supply and installation of open gym equipments and construction of epdm flooring under open gym equipment in shahdara south zone, under mplads funds for various locations of parks in municipal corporation of delhi., seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)., cross trainer /elliptical exerciser dimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel

CTN :43191359

16 Jan, 2026 NA

Faridkot - Punjab

Tender For corrigendum : estimate for laying rcc pipeline in low lying area of village udekaran outfalling at rd 24700 of thandewala link drain

CTN :43456567

14 Jan, 2026 7.12 Lacs

Channagiri - Karnataka

Tender For corrigendum : construction of a rural warehouse in yakkegondi village siddanamata gp channagiri taluk - work_18 gauge 75 mm ms laths of 2.8 m length, name board_work01_g, red oxide_work01_g, broken granite metal 10 mm_work01_g, broken granite metal 12.5 mm_work01_g, corbon electrodes_work01_g, rms gusset plate_work01_g, ms pipes of 80 mm to 100 mm dia_work01_g, unit cost as per the specification_work01_g, formwork, centering & scaffolding for chejjas, canopy & other architectural projections of minor sections_work01_g, formwork, centering & scaffolding for beams & lintels of building_work01_g, formwork, centering & scaffolding for columns & piers_work01_g, water proofing cement paint_work01_g, add brush, putty, sand paper, roller at 5% on cost of paint_work01_g, plastic emulsion paint_work01_g, enamel metal paint_work01_g, m.s rods_work01_g, binding wire_work01_g, tmt bars fe 500_work01_g, rubber beading for shutters beading_work01_g, nylon rollers_work01_g, aluminium window frame section 1.20 mm thick_work01_g, mixer (concrete small used in culvert)_work01_g, boulders_work01_g, bond stone 20 x 20 x 45 cm_work01_g, size stone 20 x 20 x 25 cms_work01_g, hom of vibrator 0.71 days_work01_g, mixer (concrete) - 1 cum capacity_work01_g, portland cement_work01_g, coarse sand (zone iii)_work01_g, broken stone aggregate 12 mm to 10 mm size_work01_g, broken stone aggregate 20 mm size_work01_g

Central Government/Public Sector

CTN :43252686

15 Jan, 2026 71.84 Lacs

Cuddapah - Andhra Pradesh

Tender For corrigendum : tender for supply of earth work in excavation by mechanical means , filling by brought out excavated earth , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand floors , providing and laying in position specified grade of reinforced cement concrete , shuttering in foundations , shuttering in superstructure columns , steel reinforcement for rcc , applying priming coats with primer , wall painting with acrylic emulsion paint , structural steel work riveted , brick work with common fly ash bricks , half brick masonry with non modular fly ash bricks , 15 mm cement plaster with mix , providing frosted glass panes 4 mm thick , neat cement punning. , painting with synthetic enamel paint , finishing walls with acrylic smooth exterior paint , providing and laying ceramic glazed floor tiles , providing and laying 60mm thick factory made cement concrete paver block , 6 mm cement plaster of mix , providing and fixing on wall face unplasticised rigid pvc rain water pipes , grading roof for water proofing treatment , making soak pit , providing and fixing gi , do gi pipe 20m dia , do gi pipe 25m dia , do gi pipe 40m dia , providing and fixing white vitreous china pedestal type , providing and fixing white vitreous china wash basin , providing and fixing precoated galvanised steel sheet roofing accessories , supplying and applying two coats of white wash , providing and placing on terrace polyethylene water storage tank , providing and fixing ptmt pillar cock , providing and fixing on wall face un plasticised rigid pvc swr , providing and fixing brass bibcock , providing and fixing mirror of superior glass , providing and fixing cp brass shower rose , providing and fixing cp brass shower valve rose , clearing jungle , 30 mm thick factory made polyvinyl chloride , supplying chemical emulsion , providing and applying white cement based putty , laying of one number pvc , supplying and fixing cable route marker , supplying and making end termination , supplying and fixing of following ways surface , supplying and fixing following rating , supplying and fixing dp sheet steel enclosure , supply of exhaust fan , installation of exhaust fan , supply of ceiling fan , installation testing and commissioning of ceiling fan , supply of ceiling fan regulators , supplying of led lights 20w , supplying of led lights 36w , supply of amps switch piano switch , supply of socket , supply of switch , supply of socket outlet , supplying and fixing 3 pin required. , supplying and fixing suitable size gi box , wiring for circuit submain wiring , wiring for circuit/ submain wiring alongwith earth wire , installation testing commissioning of wall bracket , providing and fixing danger notice plate , supplying and fixing metal box , supplying and fixing metal box , providing & fixing fixing metal box , earthing with copper earth plate , providing and fixing 25 gi , providing and fixing of lightning conductor finial , providing and fixing , providing and fixing gi , providing and fixing gi

CTN :42863241

14 Jan, 2026 17.28 Lacs

Lower Dibang Valley - Arunachal Pradesh

Tender For bid to ras corrigendum : supply of precast concrete pipes (with and without reinforcement) (v2) as per is 458 (q2)

CTN :43522371

19 Jan, 2026 NA

Samba - Jammu And Kashmir

Tender For supply of precast concrete pipes (with and without reinforcement) (v2) as per is 458 (q2)

CTN :43494625

15 Jan, 2026 6.36 Lacs

Multi City - Karnataka

Tender For supply of material and machinaries the construction of a kitchen at the kannada higher primary school in bannur village of athani taluka - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn22 burnt bricks class 35 (non modular), atn2 coarse sand (zone iii), atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams

CTN :43124334

16 Jan, 2026 1.80 Crore

Muktasar - Punjab

Tender For corrigendum : estimate for flood risk mitigation by laying rcc pipeline to drain out rainwater from low lying area of kothe rann singh wala( village doda)

CTN :43512468

15 Jan, 2026 82.46 Lacs

Rohtak - Haryana

Tender For supply erection and commissioning of new pumps for flood protection works at village bhaini bhairo rcc pipeline stage - iii in water services mechanical division, rohtak.

CTN :43512469

15 Jan, 2026 79.49 Lacs

Rohtak - Haryana

Tender For supply erection and commissioning of new pumps for flood protection works at village bhaini bhairo rcc pipeline stage - ii in water services mechanical division, rohtak.

Rcc Pipeline Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector