Get complete information related to latest Rcc Scupper Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rcc Scupper Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rcc Scupper Tenders.
Tender For etendering on turnkey basis for construction of retaining wall and plinth foundation for protection for 630kva sub station circular road in e section local ii under electrical sub division no i hpseb ltd solan
Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts
Tender For annual rate contract for supplying of streetlight material for the fiscal year - supply 24w led street light makebajaj/crompton/havells/oreva/halonix/ c&s, supply 36w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 45w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 100w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 120w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 50w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 100w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 150w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 200w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 22w led tube light complite fitting makebajaj/crompton/havells/oreva/c&s/syska/ushahalonix, supply alluminumarmourd cable 4core 6.0sqmm, supply 9 inch exhaust fan make- bajaj/crompton/havells/ushahalonix, supply ceiling fan-48inch makebajaj/crompton/havells/usha/orpat/polycab, supplying dwc pipe- 50mm size, supplying fan regulator-5 step moduler type, supplying frls wire of 1.0 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying frls wire of 1.5 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying frls wire of 2.5 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying frls wire of 4.0 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying 4 core 2.5sqmm armoured copper cable makehavells,rr,polycab,finolex,kei, supplying 4 core 4.0sqmm armoured copper cable makehavells,rr,polycab,finolex,kei, supplying 4cx10 sqmmalluminumarmoured cable makehavells,rr,polycab,finolex,kei, supplying and erecting approved make octagonal pole made from hr sheet steel. the pole should be made as per is. and shall be coated with hot dip galvanizing as per is 2629/2633/4759, suitable suspend local wind speed with integral junction box consist of terminal plate of min 6mm hylam sheet, standard profile 35mmx7.5mm din-rail for mcb mounting, stud type terminal and arrangement for cable termination to be erected with suitable foundation (included) as per details given by manufacturer considering site requirement., (e) 7 mtr. long 70 mm top x 135 mm bottom dia, 3 mm thickness with 225mmx225mmx16mm base plate, 4-m20 bolts and 600mm long j-bolt.approx pole weight 67 kg, supplying psc pole 7 mtr height with 210kg weight, pvc /cotonteprol, supplying 3 star and above rated approved make window type air-conditioning machine comprising of hermetically sealed rotary compressor, condensing & evaporating unit, fan/blower motor, thermostat, relay, remote hand setsetc suitable for (b) 1.5 ton capacity, making trench in hard murrum / tar road of suitable width of 90 cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing 1:2:4 cement concrete foundation & 70 percentage pcc from bottom including excavation for the pole of size 60 x 60 x 150 cm. deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 9 & 10 mtr pole), supplying and erecting street light pole bracket comprising main b class ms pipe of 4.2 cm/require outside dia. complete with suitable b class m.s. sleeve tubing of approx. 45cms.length and suitable for 76.5mm/80mm or require size pole top having sufficient fastners for fixing the brackets and having suitable rise as per site condition as directed and spread of 2 mtr.with suitable welded stiffener reducer and with lock nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. suitable for side entry fitting brackets of following nos of arms. [a] single arm bracket 1 mt, supply alluminium service wire- 2 core 2.5 sqmm, supply copper service wire- 2 core 2.5 sqmm, 11 kv hand gloge, 11 kv combin
Tender For csc at wno 9 garhen mohalla sc pyt purmandal, block purmandal, under sbm(g) ii - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kind of soil, disposal of 1 mtr from cutting edge., providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)., providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structure above plinth level upto floor five level including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand), half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in cement mortar 1:4 ( 1 cement : 4 coarse sand)., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand)., reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (1:1.5:3)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level, centering & shuttering incl. propping and removal of same in foundation and footings, centering & shuttering incl. propping and removal of same in suspended floors & soffits of slab, centering & shuttering incl. propping and removal of same in edges of slab, providing and applying 12 mm thick cement plaster in (1 cement: 6 fine sand) mix., providing and applying neat cement punning to plastered sufrace., providing and applying 6 mm thick cement plaster in (1 cement : 3 fine sand) mix for ceilings, providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete., providing and fixing 1st quality ceramic glazed wall tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge over 12mm thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete., providing & fixing electric points incl. laying of conduit pipes, fan box & wires of required thickness and approved make as per the engineer-in-charge incl. fixing of switches, lamp holder, complete job., providing and fixing water closet squatting pan ( indian type w.c. pan) wit
Tender For supply of e work in excavation in foundation trenches or drains i c dressing of slides , providing and laying of position cement concrete 1 5 10 , back filling , sand filling under floor , providing and laying dpc 40mm thick with cement concrete 1 2 4 , bric brick work with bricks of class designation in foundation with cement mortar 1 4 , brick work in super structure cm1 4 , half brick masonary cm 1 4 , rrc in s floor , c s centering and shuttering , rainforcement for steel work , p f windows of z section , p f door of standard wood iron , p f glazed tiles for walls , p f glazed tiles for flooring , 12 mm cement plaster of mix 1 6 , 15 mm cement plaster of mix 1 6 , 6 mm cp to ceiling of mix 1 3 , finishing walls with water proofing cement paint , white wash , making plinth protection , cement concrete 1 2 4 , pf gi pipe 15 mm internal work ls 30 , pf gi pipe 20 mm external work ls 30 , pf sw pipe up to steptic tank ls 30 , pf water closet with pvc cistern 6 indian type , pf water closet with pvc cistern 6 european type , pvc water tank , pf wash basin , pf brass bib 6 nos , pf stopcock 6 nos , constructing soak pit 1 point 5x 1point 5 x 1 point 5 filled with brickbats inckuding sw drain pipe 100 mm diameter and 1 point 20m long complete as per standard design , providing and fixing brass fitting like bib cock stop cock ball cock and angle valve etc complete as per requirement of site , construction of septic tank of size 2 point 0 x 1 point 5 x 1 point 8 mtr as per standard design and complete
Tender For supply of material and job work under mc ew c of am to conservation and restoration of baoli stepwell inside pathargarh fort najibabad bijnor - items to be executed, u.s. lime, surkhi, coarse sand, lakhori brick, c.r sand stone, r.r sand stone, brick aggregate, belgiri, gum, gur, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from naturalsources) (gst correction factor 0.973x7178.75=6984.92, steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (gst correction factor 0.973x172.60=167.94, excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete(gst correction factor 0.973x700.50=681.58, painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work(gst correction factor 0.973x155.90=151.69
Tender For annual maintenance work for pwd branch with material & labours work year 2025-26 - box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 m., demolition of brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.ii in cement mortar., dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift., demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. i r.c.c. work, excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50 meter lead a for loose or soft soil, filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20 cm thickness including watering, ramming and consolidating etc. complete., providing and laying compacted w.b.m. 100 mm. thick of grading i b.t. metal of size 45 mm to 90 mm in two layers including using 22 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying compacted w.b.m. 150 mm. thick of grading ii b.t. metal of size 45 mm to 63 mm in two layers including using 13 percentage stone screening 13.2 mm size and 7 percentage stone dust as filler including spreading, watering and consolidation by vibratory roller etc. complete., providing and laying cement concrete 1gem3gem6 1 cement gem 3- coarse sand gem6- hand broken stone aggregate 40 mm. nominal size and curing complete excluding cost of form work in gema foundation and plinth, providing and casting in situ controlled cement concrete m-200 for average 100 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete, providing and laying cement concrete 1gem3gem6 1- cement gem 3- coarse sand gem 6- crushed stone aggregates 20 mm nominal size and curing complete including cost of formwork in a wall caps per coping, providing laying controlled cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc lintels, providing laying controlled cement concrete m-250 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in gem rcc slabs and landings, providing and casting in situ ordinary cement concrete m-200 forkerbsperkerb blocks including formwork, curing and finishing complete., providing tmt bar fe 415 reinforcement for r.c.c. work including bending, binding and placing in position complete upto floor two level, white stone bela masonry block in course in foundation, plinth and super structure with stone of approved quality in cement mortar 1gem5 1cement gem 5 course sand including racking the joints etc. complete., white stone bela masonry work in partition walls up to 15 cm thickness in cement mortar 1 gem 4 course sand, providing 10 mm thick cement plaster in single coat on ceiling and soffit of stair for interior plastering up to floor two level and finished even and smooth including finishing with a floating coat of neat cement slurry for plastering on ceiling and soffits of stairs up to floor two level instead of plastering on walls. ii cement mortar 1gem4 1 cement gem 4 sand, providing 15 mm thick cement plaster in single coat on fair side brickperconcrete walls for interior plastering up to floor two level and finished even and smooth including fini
Tender For providing and fixing of pre-fab barrack (6000x3660) with plinth foundation at bop bahadurke for sos accommodation of 160 bn bsf under shq bsf abohar (sh construction of plinth foundation)