Web Analytics Made Easy - StatCounter

Ready Concrete Tenders

Get complete information related to latest Ready Concrete Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ready Concrete Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ready Concrete Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :43801248 Due date: 16 Feb, 202616 Feb, 2026 NA
Tender For bid to ras supply of purchase of br maint stores pvc pipe gi items for the qe dec 25 e e -pvc service tank 1000 ltrs capacity sintax , pvc laminated gypsum board size 600mm x 600x6mm. , armstrong mineral fiber acoustical ceiling board 600x600x18mm tiles. , float valve 15mm plastic , super flash strip or bitumen tape size 2 inch , pvc service tank 500 ltr , float valve 20mm plastic , coarse aggregate 12.5mm graded , gi tee 1.5 inch 15mm , e-board ceiling 4mm thick size 600x600mm , silicone sealant with gun clean colour , pvc pipe 50 mm dia length 3 mtr , gi tank nipple 15 mm x 300 mm long , tank cover 1000 ltr , cement in 50 kg pack. , pvc pipe 100 mm dia length 3 mtr , pvc pipe 75 mm dia length 3 mtr , synthetic resign adhesive fevicol , brush for paint 6 inch , screw wood 15 mm , gi nipple dia 15 mm dia 150 mm length , m seal water based , pgi sheet 22 gauge , gi elbow 1.5inch 15mm , drill bit for iron 5 pieces 4mm, 6mm, 8mm,10mm and 12mm , elbow pvc 75 mm dia , screw wood 20 mm , sand , vaccum cleaner or blockage cleaner rubber type , coarse aggregate 20 mm graded , drill bit for wood work complete 3 pieces 4mm, 6mm and 8mm , tank cover 500 ltr , elbow pvc 100 mm dia , gi uniion 1.5inch 15mm , elbow pvc 50 mm dia , brush for paint 4 inch , gi socket 15 mm dia , screw wood 35 mm , screw wood 25 mm 100 nos per pkt , screw wood 75 or 80 mm , gi nipple 15 x 50 mm long , white cement in 1 kg pkt , gi nipple 15 mm x 100 mm , drill bit for concrete set of 5 pcs , screw wood 40 mm , gi tank nipple 15mm , nails wire 2inch 50 mm , nails wire 1.5 inch 40 mm , brush for paint 2 inch , screw wood 25 mm , termite killer 500 ml container , nails wire 3 inch 80 mm , nails wire 1 inch 25 mm , gi socket 20 mm dia , nails wire 4 inch 100 mm , rotary hammer masonary drill bit set of 3 pcs 25mm, 30mm and 40mm , panel pin 1 x 17 mm , lime , hack saw blade , brush for paint 1 inch , gi plug 20mm , emery sheet abb cloth no 80 , dr fixit water proofing liquid 101 lwt , gi nipple 15 mm x 75 mm , gi tank nipple 20mm , nails wire 2.5 inch 60 mm , nails 5 inch , nails 6 inch , gi plug 15mm //bid details 2 / 56

State Government

CTN :43669573 Due date: 13 Feb, 202613 Feb, 2026 2.24 Crore
Tender For corrigendum : mdr 252 to fatehpurkhushk - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, dismantling of flexible pavements dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per morth specification clause 202 by mechanical means bituminous courses & granular courses, construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), kilometre stone reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and morth specification clause 801 ordinary kil

corporations/Associations/Others

CTN :43711148 Due date: 14 Feb, 202614 Feb, 2026 18.57 Lacs
Tender For tender for supply of water proofing and repair maintenance of alimco pmdk building : : -demolishing mud phaska lime terracing in roof , dismantling old plaster or skirting raking out joints and cleaning the surface , providing and laying integral cement based water proofing treatment , providing and fixing on wall face unplasticised rigid pvc rain water pipes , making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete , 15 mm cement plaster , structural steel work riveted bolted or welded in built up sections trusses , providing and fixing precoated galvanised iron profile sheets , providing and fixing ms grills of required pattern in frames of windows , renewing glass panes with putty and nails , reparing and maintenance of window with fabrication of damaged work , providing and fixing isi marked flush door shutters , providing & fixing decorative high pressure laminated sheet of plain , providing and fixing stainless steel sliding door bolts , providing and fixing stainless steel handle , providing and fixing stainless steel tower bolts , providing and fixing stainless steel door stopper , repair and maintencace of flush door shutter and chowkhat , repair and maintencace of m s channel at entrance , removing dry or enamel paint and the like by scrapping , painting with synthetic enamel paint of approved brand , painting with synthetic of required colour to give an even shade , chequerred precast cement concrete tiles 22 mm thick in footpath , making plinth protection 50mm thick of cement concrete , brick work with common burnt clay fps , providing and laying in position specified grade of reinforced cement concrete , providing and fixing gi chicken wire mesh 24 gauge , taking out doors windows and clerestory window shutters , providing and laying anti skid ceramic glazed floor tiles , dismantling old plaster or skirting raking out joints and cleaning the surface , 12 15 mm thick plaster of 1 4 cement , coarse sand with water proofing compound , removing dry or oil bound distemper , water proofing cement paint , providing and applying white cement based putty of average thickness 1 mm , distempering with 1st quality acrylic distemper , finishing walls with acrylic smooth exterior paint of required shade , removing dry or enamel paint and the like by scrapping , painting with synthetic enamel paint of approved brand , wiring for light point fan point exhaust fan point call bell point , wiring for group controlled looped light point fan point exhaust fan point call bell point , supply and fixing of 1200 mm ceiling fan with fan regulator , supply of pvc body brisk air exhaust fan , supplying and drawing following sizes of frls pvc insulated copper conductor 3x2 5 sq mm , supplying and drawing following sizes of frls pvc insulated copper conductor 3x4 sq mm , supplying and fixing gi box with modular plate 6 pin 5 6 and 15 16 a modular socket , fixing 25a modular socket outlet and 25a modular sp mcb c , supplying and fixing following way horizontal type three pole and neutral , supplying and faing 5 a to 32 rating 240 41 5 v 10ka c curve , supplying and fixing following rating four pole 415 v , supply and installation of 22 watt led batten and other accessories
 Loading, Please wait...

Connect us via What's Up