Latest ready mix asphalt Tenders | Government ready mix asphalt Tenders

Central Government/Public Sector

CTN :40685948

03 Jul, 2025 NA

Duliajan - Assam

Tender For supply of bitumen, hard grade - 30/40

CTN :40627871

18 Jun, 2025 37.84 Lacs

Jhajha - Bihar

Tender For mr-n-24-25- jhajha-01 (kiyajori to jogiyatilha) - kiyajori to jogiyatilha clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification clause 303.1., for 100 m lead @ 80 %, for 100 m lead @ 20 %, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less than 150kg/cm, opc to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant , trasported to site, laid with a paver with electronic sensor , compacting with 8-10 tonnes vibrartory roller, finishing and curing., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum s

CTN :40691865

18 Jun, 2025 9.63 Crore

Sasaram - Bihar

Tender For mr-n/24-25 sasaram-02/01 - l068-t05 to panrwa (vr37), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade 2) : construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam with stone screening gr-ii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., water bound macadam gr iii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.2 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capasity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion ,construction joints, ap

CTN :40693880

19 Jun, 2025 NA

Kandla - Gujarat

Tender For supply and delivery of seal coat of bitumen

CTN :40695380

01 Jul, 2025 5.75 Crore

Jammu - Jammu And Kashmir

Tender For part a providing and laying of wmm 250 mm thick (1 layer of 100 mm and 2 layer of 75 mm compacted), dbm of 65 mm thick (compacted) and bc of 30 mm thick (compacted) including application of prime coat & tack coat with bitumen emulsion for surfacing work in between km 62.220 and km 67.700 (job no. 607/39 (corri ii) on road reasi-arnas-mahore of 110 rcc/31 brtf under project sampark in ut of j&k & part-b providing and laying of wmm 225 mm thick (3 layers of 75 mm compacted) bm of 50 mm thick (compacted) and sdbc 25 mm thick (compacted) including application of prime coat & tack coat with bitumen emulsion for surfacing work in between km 15.265 and km 15.525 & km 18.200 (job no. 607/24 (corri ii) on road reasi-arnas-mahore of 110 rcc/31 brtf under project sampark in ut of j&2nd call: tender no. ce (p) spk/08/2025-26

Central Government/Public Sector

CTN :40703311

04 Jul, 2025 NA

Bhadravati - Karnataka

Tender For supply of distemper , emulsion , wall putty cement based , enamel , app membrane , bitumen solution primer , blown bitumen type petroleum of penetration , wooden flush door , led tube light , european pattern toilet seat , cement , fine sand , tiles , health faucet , cistern , connetion pipe , angel vale , washbasin , waste pipe , pillar cock , half inch upvc pipe , half inch upvc elbow , half inch upvc coupling , teflon tape , upvc solvent , coupling for wash basin , half inch upvc fta elbow , six amps switch , six amps socket , sixteen amps switch , sixteen amps socket , urinal sink , one point give mm wire , l ben pipe

State Government

CTN :40505230

16 Jun, 2025 10.76 Lacs

Haveri - Karnataka

Tender For corrigendum : providing qc necessary equipments for qulity control labs in qc charges of work construction of kittur rani chennamma residential school at akkur village sno 98 guttala hobli in haveri taluka,haveri district - item code: sl no 1 (data rate), item description: electronic weighing, balance with battery backup of capacity 30, kg accuracy - 5 gm ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 3 (data rate), item description: electronic weighing, balance with battery backup of capacity 1kg, and accuracy-1mg ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 5 (data rate), item description: stainless steel depth, guage-150mm long ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 6 (data rate), item description: slump cone complete with, base plate and graduated tamping rod. ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 9 (data rate), item description: core cutter, dolly and, rammer of 9.5 kg one set ---- in addition to, the conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 10 (data rate), item description: rapid moisture meter, apparatus with calcium carbide powder box, 1no packed in wooden box with calibration, report ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 11 (data rate), item description: bitumen extractor hand, operated with handle ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 12 (data rate), item description: filter paper ( bundle of, 100 pieces) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 13 (data rate), item description: benzene ---- in addition, to the conditions displayed in the kppp, portal, separate general conditions sheet, uploaded and should be considered, item code: sl no 14 (data rate), item description: bosch digital camber, board range120 cm (bosch dnm120i digital, inclinometers) ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 15 (data rate), item description: digital temperature meter, / thermometer with sensor (o c to 300 c), with accuracy of +/-0.1 degree centigrade ----, in addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 17 (data rate), item description: cast iron concrete cube, mould 15x15x15cm as per isi standard (set, of 3 cubes) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 18 (data rate), item description: cast iron concrete beam, mould for flexural test 150x150x700 mm as, per isi standard ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 19 (data rate), item description: iron tray 10x12" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 20 (data rate), item description: iron tray 12x18" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 21 (data rate), item descript

CTN :40686745

26 Jun, 2025 NA

Mumbai - Maharashtra

Tender For limited tender for supply, installation, commissining, traning and documentationn of wax content in bitumen analyser at bpcl mumbai refinery