Web Analytics Made Easy - StatCounter

Recess Mounting Luminare Tenders

Get complete information related to latest Recess Mounting Luminare Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Recess Mounting Luminare Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Recess Mounting Luminare Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :43327064 Due date: 30 Dec, 202530 Dec, 2025 NA
Tender For provision of el to the government college mbc girls hostel at nemmeli in chengalpattu district - provision of el to the government college mbc girls hostel at nemmeli in chengalpattu district. - wiring with 2x1.5 sqmm (22/0.3) pvc insulated sc unsheathed frls cu.conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t. switch and making good of the concealed portion with suitable colour for pvc concealed light / fan point (for electronic regulator) (5 pts / coil), wiring with 2 x 1.5 sq.mm. (22 / 0.3) pvc insulated sc unsheathed frls copper conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessoires in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a ft switch and making good of the concealed portion with suitable colour for pvc concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.), supply and fixing of 4 feet led 18 w fitting with led 18 w tube (higher end) complete with tw round blocks on wall or ceiling with pvc unsheathed frls copper leads from terminals to the fitting , supply and fixing of 4feet led 18w fitting with led18w tube (higher end) complete with conduit pipe suspension from the ceiling with pvc unsheathed frls copper leads from terminals to the fitting with tube. (philips/ havells/equ ) , supply and fixing of 4 feet led 2x20 w fitting with led 2x20 w tube (higherend) complete with tw round blocks on wall or ceiling with pvc unsheathed frls copper leads from terminals to the fitting, supply and fixing of 1200mm (48") sweep ac ceiling fan high speed complete with 2 module 100w fan step regulator (higher end) with 300mm down rod on the existing fan clamp, supply and fixing of 3 nos. 5a (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable tw box covered with hylem sheet in flush with wall with earth connection (for computer plug socket), supply and fixing of 5a / 15a 3 pin combined flush type wall socket with 15a flush type switch on suitable tw box, supply and fixing of wt bulk head fitting with guard suitable for 9 w led lamp with led bulb, supply and fixing of fancy glass shade and 7w / 9w led bulb, supply and fixing of 20amps dp plug and socket in sheet enclosure with 32a dp mcb in flush with wall with earth connection (for ac plug) [legrand (mds) / hager (l&t) make], supply and run of 4 of 10 sq.mm. pvc insulated sc unsheathed frls copper conductor of 1100 v grade in suitable pvc rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position., supply and fixing of 300mm (12") sweep (light duty) ac exhaust fan complete without provision and making good wall with louvers, supply and fixing of 32a dp mcb in flush with sheet enclosure in flush with wall with earth connection [legrand (mds) / hager (l&t) make], supply and run of 2 of 2.5 sq.mm. pvc insulated sc unsheathed frls copper conductor of 1100 v grade in suitable pvc rigid pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion, supply and run of 2 of 4 sqmm (56/0.3) pvc insulated sc unsheathed frls cu.conductor of 1100v grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sqmm cu wire and making good of the concealed portion with suitable colour, supply and run of 2 of 1.5 sq.mm. (22 / 0.3) pvc insulated sc unsheathed frls copper conductor of 1100v grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5sqmm cu wire and making good of the concealed portion with suitable colour, supply and fixing of 12 way single pole and neutral mcb sheet steel enclosure distribution board with double door (metal) with 1 no. 32a dp mcb switch as incoming and 10

State Government

CTN :43325924 Due date: 05 Jan, 202605 Jan, 2026 NA
Tender For improvement of internal and external electrification of meethapur chowk bps under badarpur constituency ac-53. - providing of new generation energy saving and environmentally friendly long life of 70/72 watt led street light made up of pressure die cast aluminium hosing with high efficient led as lighting source and pc cover having top opening separate driver compartment with ip66 protection and impact resistance of 1k07. make:-havells/ bajaj/crompton/phillips/wipro., supplying and fixing of 32 mm dia. x 2.00 mtr. long g.i. pipe(medium class) bracket for mounting of fluorescent / hpmv /hpsv street light fitting on pole including bending the pipe to the required shape, 2 nos. 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required., supply of pole mounted cable junction box of size 350x250x138 having ip 65 protection with complete accessories as per site requirement .make:- sintex/ hensel, supply of 2 x 10 sq. mm. aluminium conductor power armoured cable. make :- gloster/ grandly/ universal/ havells/cci /djb approved., laying and fixing of one number pvc insulated and pvc sheathed/ xlpe power cable of 1.1 kv grade of following size on wall surface as reqd. (clamped with 1mm thick saddle) 2x 10 sq. mm., fixing of control junction box with the help of nut, bolts, washers, fasteners etc. as per site requirement.( 10% of sn.3), providing of decorative ultra slim square profile led lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack. led tube light of 20 watt 6000k. make: havells /bajaj/ philips/crompton/ wipro., providing of heavy duty exhaust fan of size 450 mm, 1440 r.p.m of single phase 230 volt. make: havells /bajaj/ philips/crompton/ usha/ khaitan/ almonard., providing of heavy duty exhaust fan of size 300 mm, 1440 r.p.m of single phase 230 volt. make: havells /bajaj/ philips/crompton/ usha/ khaitan/ almonard., installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required., providing of ceiling fan 1200 mm sweep. make: orient/havells /bajaj/ philips/crompton/ usha/ khaitan/ almonard., installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable etc. as required., providing of air circulator 600 mm sweep. make: orient/havells /bajaj/ philips/crompton/ usha/ khaitan/ almonard., installation, testing and commissioning of air circulator, including wiring with 2.5 sq. mm frls pvc insulated, copper conductor, single core. cable etc. as required.( 10% of sn.13), wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c., wiring for light/ power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit along with 1 no 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required., wiring for circuit/ sub-main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 x 2.5 sq. mm +1 x 2.5 sq. mm earth wire., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet a

State Government

CTN :43325931 Due date: 05 Jan, 202605 Jan, 2026 NA
Tender For replacement of damaged external lighting equipment installed at by pass road m.b. extension bps and badarpur village no-1 bps under badarpur constituency ac-53. - supplying and embedding 32 mmdia g.i. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required., supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v "c" curve dp mcb complete with connections, testing and commissioning etc. as required., supply of 45 w led new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminum housing with high efficient led as lighting source and pc cover having top opening separate driver compartment with ip66 protection and impact resistance of ik07., supply of pole mounted cable junction box of size 305x250x128mm having ip 65 protection with complete accessories as per site requirement. make:-sintex/hesel., fixing of control junction box with the help of nut, bolts, washers, fasteners etc. as per site requirement.( 10% of sn.4), wiring for circuit/sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire., installation, testing and commissioning of prewired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable and earthing etc.as required.

State Government

CTN :43325969 Due date: 05 Jan, 202605 Jan, 2026 NA
Tender For improvement of internal and external electrification system and allied works at water gallery sarita vihar ht bps under okhla constituency ac-54. - providing of new generation energy saving and environmentally friendly long life of 70/72 watt led street light made up of pressure die cast aluminium hosing with high efficient led as lighting source and pc cover having top opening separate driver compartment with ip66 protection and impact resistance of 1k07. make:-havells/ bajaj/crompton/phillips/wipro., supplying and fixing of 32 mm dia. x 2.00 mtr. long g.i. pipe(medium class) bracket for mounting of fluorescent / hpmv /hpsv street light fitting on pole including bending the pipe to the required shape, 2 nos. 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required., supply of pole mounted cable junction box of size 350x250x138 having ip 65 protection with complete accessories as per site requirement .make:- sintex/ hensel, supply of 2 x 10 sq. mm. aluminium conductor power armoured cable. make :- gloster/ grandly/ universal/ havells/cci /djb approved., laying and fixing of one number pvc insulated and pvc sheathed/ xlpe power cable of 1.1 kv grade of following size on wall surface as reqd. (clamped with 1mm thick saddle) 2x 10 sq. mm., fixing of control junction box with the help of nut, bolts, washers, fasteners etc. as per site requirement. ( 10% of sn.3), providing of decorative ultra slim square profile led lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack. led tube light of 20 watt 6000k. make: havells /bajaj/ philips/crompton/ wipro., providing of heavy duty exhaust fan of size 450 mm, 1440 r.p.m of single phase 230 volt. make: havells /bajaj/ philips/crompton/ usha/ khaitan/ almonard., installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required., providing of ceiling fan 1200 mm sweep. make: orient/havells /bajaj/ philips/crompton/ usha/ khaitan/ almonard., installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable etc. as required., providing of air circulator 600 mm sweep. make: orient/havells /bajaj/ philips/crompton/ usha/ khaitan/ almonard., installation, testing and commissioning of air circulator, including wiring with 2.5 sq. mm frls pvc insulated, copper conductor, single core. cable etc. as required. ( 10% of sn.13), wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c, dsr (e&m)2024-25, item code - 1.10.3, wiring for light/ power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit along with 1 no 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. dsr (e&m)2024-25, item code - 1.12, wiring for circuit/ sub-main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 x 2.5 sq. mm +1 x 2.5 sq. mm earth wire. dsr (e&m)2024-25, item code - 1.14.2, supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required. dsr (e&m)2024-25, item no.- 1.31, supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6

CTN :43321852 Due date: 03 Jan, 202603 Jan, 2026 NA
Tender For maintenance of volleyball court : : -repair and painting of volleyball court boundary wall 96x68x3 ft , repair of iron mesh fencing 10 x35 ft for 02 panels , 200 w led flood light , 2sqmm multi strand copper wire , miniature circuit breaker , on or off switch , 12 module surface box and plate , installation charges for electrical fitting and accessories

corporations/Associations/Others

CTN :43261494 Due date: 26 Dec, 202526 Dec, 2025 8.50 Lacs
Tender For tiruppur corporation_z4_gf_maintenance and special repaire work and providing and fixing of equipments, tools and plants to the micro compost centre at sundamedu i in ward no 53 - supply and fixing of sanitary napkin destroyer machine machine with storage capacity of 100 napkins per day with dimension of 220mm x 220mm x 360mm of wall mounting style no 1 pcs etc.,, supply and fixing of plastic crates of dimension 460mm * 520 mm with isi standard etc.,, supply and fixing of plastic barrels of measuring 800 litres with lid for storing of enzymes with isi standard etc.,, supply and fixing of plastic dustbin of measuring 250 litres for storing dry waste on segregation etc.,, supply and fixing of weighing scale 500kgs of measuring platform of 2.5 feet * 2.5 feet with standard government seal and inbuilt battery of stand by upto 6 hrs, supply and fixing of pest controller of 64w with 360 inser killer etc., ., providing safety gloves and apron for the workers with isi standards etc.,, supply and installation of viberator separator capacity of 1 ton/hr with power 2hp motorand measuring of size 3*6 feet and the installation to the required place as per instruction of departmental officers etc complete., supply of powing tools and segegrator for the ground work of mcc compost tank with isi standard and proper measuring length according to the requirement., supply of industrial making trolly as per standard sixw using of lead purpose etc.,, brick work in cm 1:5 mix using best second class table moulded chamber burnt bricks 9"x4 "x3" having 350 kg/cm compressive strength and 15% or less water absorbent in the period of 24hours immersement and confirming to isi specifications including finishing, curing etc., complete complying with standard specification., plain cement concrete 1:4:8 [one cement, four m-sand and eight course aggregates] using 40mm size hard broken/machine crushed granite stone jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification., plastering with cement mortar 1:4 mix (one cement four p-sand), 20mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., plastering with cement mortar 1:5 mix (one cement five p-sand), 12mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., painting two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface and curing etc., complete as per standard specification., finishing the top of flooring with a layer of cement concrete 1:3 [one cement and three stone jelly] ellis pattern 20mm thick using 10mm thick and below gauge hbg stone (no sand to be added) and the surfaces rubbed smooth with current etc., complete complying with standard specification., wring with 2 x1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t switch with continous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable color of pvc concealed light point / fan point (for electronic regulator )., supply and fixing of 20w 4 feet led fitting as per standard specificatin, supply and fixing of 1200mm (48") sweep ac ceiling fan complete with stepped electro

corporations/Associations/Others

CTN :43261502 Due date: 26 Dec, 202526 Dec, 2025 7.50 Lacs
Tender For tiruppur corporation_z4_gf_maintenance and special repaire work and providing and fixing of equipments, tools and plants to the micro compost centre at sundamedu ii in ward no 41 - supply and fixing of sanitary napkin destroyer machine machine with storage capacity of 100 napkins per day with dimension of 220mm x 220mm x 360mm of wall mounting style no 1 pcs etc.,, supply and fixing of plastic crates of dimension 460mm * 520 mm with isi standard etc.,, supply and fixing of plastic barrels of measuring 800 litres with lid for storing of enzymes with isi standard etc.,, supply and fixing of plastic dustbin of measuring 250 litres for storing dry waste on segregation etc.,, supply and fixing of weighing scale 500kgs of measuring platform of 2.5 feet * 2.5 feet with standard government seal and inbuilt battery of stand by upto 6 hrs, supply and fixing of pest controller of 64w with 360 inser killer etc.,, providing safety gloves and apron for the workers with isi standards etc.,, supply and installation of viberator separator capacity of 1 ton/hr with power 2hp motorand measuring of size 3*6 feet and the installation to the required place as per instruction of departmental officers etc complete., supply of powing tools and segegrator for the ground work of mcc compost tank with isi standard and proper measuring length according to the requirement., supply of industrial making trolly as per standard sixw using of lead purpose etc.,, brick work in cm 1:5 mix using best second class table moulded chamber burnt bricks 9"x4 "x3" having 350 kg/cm compressive strength and 15% or less water absorbent in the period of 24hours immersement and confirming to isi specifications including finishing, curing etc., complete complying with standard specification., plain cement concrete 1:4:8 [one cement, four m-sand and eight course aggregates] using 40mm size hard broken/machine crushed granite stone jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification., plastering with cement mortar 1:4 mix (one cement four p-sand), 20mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., plastering with cement mortar 1:5 mix (one cement five p-sand), 12mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., painting two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface and curing etc., complete as per standard specification., finishing the top of flooring with a layer of cement concrete 1:3 [one cement and three stone jelly] ellis pattern 20mm thick using 10mm thick and below gauge hbg stone (no sand to be added) and the surfaces rubbed smooth with current etc., complete complying with standard specification., wring with 2 x1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t switch with continous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable color of pvc concealed light point / fan point (for electronic regulator )., supply and fixing of 20w 4 feet led fitting as per standard specificatin ., supply and fixing of 1200mm (48") sweep ac ceiling fan complete with stepped electr

corporations/Associations/Others

CTN :43261557 Due date: 26 Dec, 202526 Dec, 2025 7.15 Lacs
Tender For tiruppur corporation_z1_gf_maintenance and special repair work and providing and fixing of equipments tools and plants to the micro compost centre at athupalayam in ward no 10 - supply and fixing of sanitary napkin destroyer machine machine with storage capacity of 100 napkins per day with dimension of 220mm x 220mm x 360mm of wall mounting style no 1 pcs etc., complete., supply and fixing of pest controller of 64w with 360 inser killer etc., complete., dismantling the existing plain cement concrete including removing the debris from the site and stacking useful material at work site for reuse etc., complete complying with standard specification., earthwork excavation for foundation in all soils and sub soils except in hard rock requiring blasting and depositing on bank with initial lead of 10m and initial lift of 2m inclusive of shoring, shuttering, bailing out water wherever necessary, refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth within the compound in place shown by the departmental officers and clearing and levelling the site etc,. complete., plain cement concrete 1:4:8 [one cement, four m-sand and eight course aggregates] using 40mm size hard broken/machine crushed granite stone jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification., supply and delivery fixing of pvc chamber 2way 90 with cover size of 315mm x 110mm with chamber riser size of 315mm x 200mm including transporting etc.,, chambers, riser, plastering with cement mortar 1:4 mix (one cement four p-sand), 20mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., plastering with cement mortar 1:5 mix (one cement five p-sand), 12mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., painting two coats with ready mixed plastic emulsion paint (weather proof) of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., complete as per standard specifications., wring with 2 x1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t switch with continous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable color of pvc concealed light point / fan point (for electronic regulator ), supply and fixing of 200w 4 feet led fitting as per standard specificatin., supply and fixing of 1200mm (48") sweep ac ceiling fan complete with stepped electronic 300w regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")., supply and fixing of wall mounting 450mm sweep fan etc.,, supply and fixing of roof ventilator fan etc.,, replacement of underground utilities hdpe pipe damaged during earthwork excavations for pipe laying works including cost of additional earthwork excavation in all soils, including bt cutting, cc roads , removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of hdpe pipes, couplers, jointing materials and required specials, cutting, threading, conveying , laying, jointing and

corporations/Associations/Others

CTN :43265854 Due date: 26 Dec, 202526 Dec, 2025 8.20 Lacs
Tender For tiruppur corporation_z4_gf_maintenance and special repaire work and providing and fixing of equipments, tools and plants to the micro compost centre at andipalayam chinnadipalayam in ward no 39 - supply and fixing of sanitary napkin destroyer machine machine with storage capacity of 100 napkins per day with dimension of 220mm x 220mm x 360mm of wall mounting style no 1 pcs etc.,, supply and fixing of plastic crates of dimension 460mm * 520 mm with isi standard etc.,, supply and fixing of plastic barrels of measuring 800 litres with lid for storing of enzymes with isi standard etc.,, supply and fixing of plastic dustbin of measuring 250 litres for storing dry waste on segregation etc.,, supply and fixing of weighing scale 500kgs of measuring platform of 2.5 feet * 2.5 feet with standard government seal and inbuilt battery of stand by upto 6 hrs, supply and fixing of pest controller of 64w with 360 inser killer etc.,, providing safety gloves and apron for the workers with isi standards etc.,, supply and installation of viberator separator capacity of 1 ton/hr with power 2hp motorand measuring of size 3*6 feet and the installation to the required place as per instruction of departmental officers etc complete., supply of powing tools and segegrator for the ground work of mcc compost tank with isi standard and proper measuring length according to the requirement., supply of industrial making trolly as per standard sixw using of lead purpose etc.,, brick work in cm 1:5 mix using best second class table moulded chamber burnt bricks 9"x4 "x3" having 350 kg/cm compressive strength and 15% or less water absorbent in the period of 24hours immersement and confirming to isi specifications including finishing, curing etc., complete complying with standard specification., plain cement concrete 1:4:8 [one cement, four m-sand and eight course aggregates] using 40mm size hard broken/machine crushed granite stone jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification., plastering with cement mortar 1:4 mix (one cement four p-sand), 20mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., plastering with cement mortar 1:5 mix (one cement five p-sand), 12mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., painting two coats with ready mixed plastic emulsion paint (weather proof) of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., complete as per standard specifications., finishing the top of flooring with a layer of cement concrete 1:3 [one cement and three stone jelly] ellis pattern 20mm thick using 10mm thick and below gauge hbg stone (no sand to be added) and the surfaces rubbed smooth with current etc., complete complying with standard specification., wring with 2 x1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t switch with continous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable color of pvc concealed light point / fan point (for electronic regulator )., supply and fixing of 20w 4 feet led fitting as per standard spec

corporations/Associations/Others

CTN :43265857 Due date: 26 Dec, 202526 Dec, 2025 4.80 Lacs
Tender For tiruppur corporation_z4_gf_maintenance and special repaire work and providing and fixing of equipments, tools and plants to the micro compost centre at pavalavanjipalayam i in ward no 57 - supply and fixing of plastic crates of dimension 460mm * 520 mm with isi standard etc.,, supply and fixing of plastic barrels of measuring 800 litres with lid for storing of enzymes with isi standard etc.,, supply and fixing of plastic dustbin of measuring 250 litres for storing dry waste on segregation etc.,, supply and fixing of pest controller of 64w with 360 inser killer etc.,, providing safety gloves and apron for the workers with isi standards etc.,, supply of powing tools and segegrator for the ground work of mcc compost tank with isi standard and proper measuring length according to the requirement., supply of industrial making trolly as per standard sixw using of lead purpose etc.,, finishing the top of flooring with a layer of cement concrete 1:3 [one cement and three stone jelly] ellis pattern 20mm thick using 10mm thick and below gauge hbg stone (no sand to be added) and the surfaces rubbed smooth with current etc., complete complying with standard specification., wring with 2 x1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t switch with continous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable color of pvc concealed light point / fan point (for electronic regulator )., supply and fixing of 20w 4 feet led fitting as per standard specificatin, supply and fixing of 1200mm (48") sweep ac ceiling fan complete with stepped electronic 300w regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18"), supply and run of 2 of 1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu.conductor of 1100v grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14swg tc wire and making good of the concealed portion with suitable colour, supply and delivery of 1" green hose using of mcc center etc.,, painting two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface and curing etc., complete as per standard specification.
 Loading, Please wait...

Connect us via What's Up