Latest recharge structure Tenders | Government recharge structure Tenders

corporations/Associations/Others

CTN :41818480

19 Sep, 2025 NA

Delhi - Delhi

Tender For work of design, supply, installation, testing, commissioning, maintaining and managing of neutral in-building solutions (ibs) and outdoor communication services for providing shared mobile (cellular) coverage (2g/3g/4g/5g or above) in world trade centre premises including tower-a, b, c, d, e, f, g, h, i, j, k, l, restaurant area, retail blocks, all three level basements, terraces, common areas and utility areas and other areas in premises at wtc nauroji nagar, new delhi-110029

Central Government/Public Sector

CTN :41507654

17 Sep, 2025 8.99 Lacs

Danapur - Bihar

Tender For corrigendum : procurement of scaled furniture for opening of new echs polyclinic patna-ii (type-d) bihar - schedule "a" part-i (steel furniture), table 900 x 600 mm top fd-1007, rack steel six tierfd-1038, rack steel fd-129, side rack with trayfd-1023, schedule "a" part-ii (trade pattern furniture), bed hospital, table bed side hospital, stool steel, step two tier steel, chair invalid, screen movable, patient trolly stretcher, stool revolving, receptacle large, receptacle small, couch examination, cylinder trolley, board notice, lateral filing cabinet, chair visitor, chair revolving, chair computer, chair waiting three seater, s&f steel work in tubular trusses including special shaped washer etc complete using erw or induction butt welded tubes confirming to i.s. 1161-1998

CTN :41728968

06 Oct, 2025 NA

Mumbai - Maharashtra

Tender For empanelment of contractors, stationary suppliers, groceries suppliers, courier agencies, property consultants, architects-,civil construction project including repair work ,interior & furnishing works ,electrical work ,composite work (civil, interior furnishing works, electrical & allied works, hvac works, & other allied services works), civil including carpentry and furniture ,repairs, plumbing, painting ,electrical ,hvac/ac, courier services -domestic ,courier services -international ,trade, property consultant ,trade ,architect for interior design & project work

State Government

CTN :41573787

13 Sep, 2025 75.0 Thousand

Samba - Jammu And Kashmir

Tender For corrigendum : construction of rain water harvesting recharge structure at phe sub- division office bari- brahmana including repair work under district capex budget

Corporations / Associations / Others

CTN :41730883

16 Sep, 2025 NA

Kamrup - Assam

Tender For providing of event or seminar or workshop or exhibition or expo management service - national; trade shows and expos; as per scope of work; as per scope of work; as per scope of work

Corporations / Associations / Others

CTN :41730893

16 Sep, 2025 NA

Kamrup - Assam

Tender For providing of event or seminar or workshop or exhibition or expo management service - national; trade shows and expos; as per scope of work; as per scope of work; as per scope of work

CTN :41734670

15 Sep, 2025 12.20 Lacs

Kuchaman - Rajasthan

Tender For supplying and fixing of led street lights in municipal area kuchaman city - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsrled street light fixture with minimum lumen output 2450 lm, led street light fixture with minimum lumen output 3700 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .1 x 25 sq. mm. + 1x25 sq. mm. (insulated), providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 25 mm dia, supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.90 % purity copper, class 5 stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rating as per is:3961 part 5, in existing surface or recessed pvc/ ms conduit/casing capping making connections with copper lugs of suitable size, ferrules,testing etc. as required. oem must have its own in housenabl lab setup for all testing facilities for wires. for additional technical parameters of product / work refer annexure a attached with this bsr2 x 1.5 sq.mm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvcpipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work r

CTN :41734802

11 Sep, 2025 49.90 Lacs

Kishangarh - Rajasthan

Tender For providing of street light providing and fixing - providing & fixing of ik08, ip 66 protected led street lightluminaire on existing bracket/pole. fixture made of powder coatedsingle piece pressure die cast aluminum material with heatdissipation fins on housing with uv stabilized pc (uv stablizationreport submitted for uv cover ) /toughened glass cover andsecondary lens on each led & should be smd type of 3 to 5 watteach . the system efficacy >=125 lm/ wt and potted driver & has aunique bis r number with input voltage ac 120 to 270 v ac withhigh voltage cutoff @>=300 v ac and auto resetting safety ,power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity10% to 90% rh working temp -5c to 45c . driver current 750ma.the luminaire shall be bis certified and trade mark certified. lifeexpectancy equal or more than 50000 burning hrs with minimum70% lumen maintened , cri >70 and cct 5700k +355k. surgeprotection shall be min 4 kv internal and min 10 kv external insidedriver compartment. driver should be phase to phase protection of440 v for 4 hrs. manufactures word mark/nameengraved/embossing on die cast housing to allowtraceability/authenticity. fixture shall be as per is 10322complianced.oem must have its own in house nabl lab setup forall testing facilities for led fixtures. (lm79/lm80) certificate/report with liable warranty of product/accessories from oem shall besubmitted. all as per pre approved by engineer in-charge. foradditional technical parameters of products/ work , refer annexure"a" attached with this bsr .led street light fixture with minimum lumen output 3700 lm, led street light fixture with minimum lumen output 5600 lm, providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply & drawing wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor with 10 swg g.i. support wire duly clipped etc. asrequired. for additional technical parameters of product / work refer annexure a attached with this bsr 4.0 sq.mm, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection,programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. foradditional technical parameters of products/ work , refer annexure"a" attached with this bsr . one day reserve (analog type ), providing & fixing of 240/415 v ac mcb with positive isolation of 10ka breaking capacity (b/ c/d tripping characteristic as per type ofload and site requirement) 4 kv impulse withstand voltage, isimarked is 8828(1996) / conforming to iec 60898-1 2002, iec60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per iec, minimum phase termination capacity of35sq.mm. , conductor line load reversibility , ip 20 contact protectionand fitted in existing distribution board/sheets, minimum electricaloperation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80a & above rating including making connections, testing etc. asrequired. oem shall have submit nabl / cpri / erda accrediatedlab type test reports & all as per pre approved by engineer incharge. for additional technical parameters of product / work referannexure a attached with this bsr single pole mcb (with b/c curve tripping characteristics) 6 a to 32 a rating, providing & fixing of 240/415 v isolator isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilizationcategory, 4kv impulse withstand voltage, true contact indication,red colour dolly / lever shall have single mould covering ove

State Government

CTN :41655085

10 Sep, 2025 39.74 Lacs

Navsari - Gujarat

Tender For bore well recharge structure, open well recharge structure,gabion structure.

State Government

CTN :41655076

10 Sep, 2025 29.41 Lacs

Navsari - Gujarat

Tender For injection bore well recharge structure , causeway cum check dam , gabion structure , bore well recharge structure , flow chenal , open well recharge structure , west wear.

Recharge Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

Corporations / Associations / Others

Corporations / Associations / Others

State Government

State Government