Latest rectifier panel scrap Tenders | Government rectifier panel scrap Tenders

Central Government / Public Sector

CTN :45200755

21 May, 2026 12.04 Lacs

Puri - Odisha

Tender For supply installation testing charging and commissioning of outdoor type transformer including dp structure poles metering earthing electrical fittings cabling from state electricity board or electric supply company at location from mangala hata bridge

corporations/Associations/Others

CTN :45199818

22 May, 2026 NA

Multi City - Multi State

Tender For auction sale of dg 1-500 kw diesel generator set with all accessories, engine,dg 2 diesel generator set with all accessories engine,semi - electrically operated overhead crane,old transformer, national electric ltd-100 kva,old transformer, hindustan brown boveri ltd 300kva,3.3kv/400v,old transformer, ete,old transformer- (no name plate),old transformer, cg2000 kva, 1 1 /3.3kv,old transformer, kel 2000 kva,1 1/3.3kv,old transformer, kel750 kva, 0.4413.3kv,old transformer, nei 500 kva, 0.4413.3ky,old transformer, nei 250 kva, i ikv/400v,diesel pump engine, make: kirloskar, i 10 kva

Central Government/Public Sector

CTN :45060756

29 May, 2026 41.00 Lacs

Dibrugarh - Assam

Tender For corrigendum : addn/ altn to old sho complex, provn of ac and geysers at various loc at af stn dinjan and provn of ceiling fans and chain link fencing around the transformer and electric distribution pt at nepalipatti of asc bn under ge (af) mohanbari

Central Government/Public Sector

CTN :45192677

04 Jun, 2026 NA

Faridkot - Punjab

Tender For provn of 200 kva transformer for tcp-5 area, external electric network near 66 kv sub station and conversation of ht oh electric line to ug cabling at map-i area at faridkot mil stn

Central Government And Public Sector

CTN :44256349

27 May, 2026 71.27 Crore

Siang - Arunachal Pradesh

Tender For corrigendum : procurement of transformers for heo hep - transformer package heo hydro electric project (240mw),arunachal pradesh.

CTN :45197592

25 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of terminal block 4 sqmm screw connector type , fuse , 6.3a , 5 x 20 , terminal block 4 sqmm , control relay glass type 2c/ o 110vac with base , mcb 2 pole 10 a c curve , pilot lamp white , indication lamp 110v ac 22mm diameter (red) , indication lamp 110v ac 22mm diameter (amber) , control cable 8 x 1.5 sqmm pvc insulated 80 mtr , limit switch , direct drive motor , controller transformer 1p 300va 380// 110v , stainless steel ss304 encl 500x500x210(control panel) , proximity sensor , luna light skewing system steel structure assembly , power cable 3 x 2.5 sqmm pvc insulated 15 mtr , joystick controller 2 direction 22mm diameter , electric motor direct drive controller , main switch disconnector 3 pole 25a , stainless steel ss304 encl 175x150x150(operating station)

CTN :45197850

04 Jun, 2026 NA

Mathura - Uttar Pradesh

Tender For supply of supply install testing commissioning outdoortype power transformer of capacity 6300 kva as per latest is code , xlpe insulated pvc bedded galvanized steel strip armoured standred aluminium conducter electric power cable 11 kv of cross section area 120 sqmm and 3 cores , end termination cold shrinkable joint kit for 120 sqmm , copper earthing with earth plate electrode 60 cm x 60 cm x 3 point16 mm with copper strip 20 x 3 mm as earthing strip , disconnecting and taking down complete power transformer of capacity 3 point 15 mva with complete connected accessories fittings with disconnecting electric connection of electric panels

CTN :45205789

23 May, 2026 1.60 Lacs

Rajauri - Jammu And Kashmir

Tender For recapitalization / strengthening along with allied works of damaged 250 kva aluminium wound electric transformer installed at lift irrigation station quasba bala.

CTN :45048307

08 Jun, 2026 NA

Tarapur - Maharashtra

Tender For : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of spares for diese

CTN :44927247

27 May, 2026 NA

Sirohi - Rajasthan

Tender For corrigendum : procurement of equipment for guru vashisth temple and craft foundation - machine, bridge type stone cnc engraving double head machine, bridge type stone cnc profile double head machine, 4 axis rotary cnc cutting & engraving machine, heavy duty block cutter 2.3 mt., heavy duty block cutter 1.6 mt, 5- axis cnc wire saw cutting ht. 8 ft., slurry cleaning plant, eot crane capacity 10 tons, span 55 ft., gantry crane- v type cap.35 tons span 40 ft. l- 100 ft., transformer, electric panel, earthing, cable, other accessory & fitting

Rectifier Panel Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector