Latest recycling plant Tenders | Government recycling plant Tenders

Central Government/Public Sector

CTN :40537729

23 Jun, 2025 NA

Madurai - Tamil Nadu

Tender For 1.improvements to railway hss school, madurai.2 mdu-bdnk & mdu-dg section- extension of pf no. 1 at usilampatti (uslp-nsg6) and pf no. 2 atvadipatti (vdp-nsg6) station3. repairs to compound wall around the madurai railway colony.4. mdu division- repairs to orh - b block at madurai5. modification of water recycling plant (400 kld) into sewage treatment plant (400 kld) atmadurai (mdu)6. repairs and attention to the spalling roofs in staff quarters at madurai railwaycolony.

CTN :40228797

27 May, 2025 NA

Vadodara - Gujarat

Tender For corrigendum : supply of repair to tata mobile 088271h - labour charge for servicing and replacement and fixing of unserviceable filter , engine oil 15w40 , diesel fuel filter , oil filter , coolant , steering oil , break oil , clutch oil , air filter , labour charge computerised wheel alignment and wheel balancing , labour charge for removing and refixing after fuel tank cleaning , labour charge servicing replacement defective parts of door and making up the bends and rubber hose , labour charge servicing and replacement of unserviceable front disc , brake rubber boot , labour charge for servicing external clogging of intercoolers and radiator making up defects as reqd , material and labour for servicing and replacement of unservicable drive belts , labour charge serving and making up defects for bleeding of clutch actuation system , labour charge servicing and replacement of necessary defects for proper sealing of air intake system , labour charge servicing and tightening all fasterners , fasterners with acessories , labour charge for checking and replacement as necessary defects in electrical system ensure usage of genuine fuses with correct ratings condition of fuse and relay holding , fuses with relay , labour charge for check steering wheel play check for proper condition of ball joints and rubber boots of tie rod drag link for looseness damage , rubber boots of tie rod , labour charge for complete servicing of door with necessary replacement , labour charge for checking of wiper assembly and replacement of unserviceables parts and painting , wiper motor stator rewinding , wiper motor armature winding , wiper motor fxing materials , wiper linkage , wiper blade , wiper arm , labour charge for complete dismantling and servicing of rear load leaf spring and bending and refitting the same and replacement of unserviceables parts , rear spring bushing kit , centre bolt , clamp , labour charge for complete burnt starter from vehicle and replacing following parts , solenoid switch , carbon brush set , bushing set , fitting kit , labour charge for complete dismantling of steering from the vehicle , replacement of steering center line assy , replacement of steering center line pin kit , material and labour for rectifing denting filling painting as existing , material and labour for servicing washing and greasing

CTN :40384596

07 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For repair of vehicle - overhauling of self starter incl replacement of counter teeth gear bentex carbon bush spring and tapping of field coil , replacement of hydraulic jack seal repairing of hydraulic system and of hydraulic tank and replace hydraulic liver , replacement of gear oil , replacement of hydraulic oil , replacement of engine oil , replacement of fuel filter , replacement of oil filter , replacement of air cleaning elements , replacement of clutch assemble complete , ml for repairing fuel pump assembly by calibration of fuel pump with injection tips including replacement of spring plunger , replacement of ignition switch assembly complete with steering lock , wheel balancing and alignment including brake adjustment , tank cleaning and washing , dismantling of rear and front wheel and overhauling greasing of four wheel replacement of oil seal 08 no wheel cylinder bid number/ & ( * ) : gem/2025/b/6242801 dated/ + : 17-05-2025 bid document/ 3 3 1 / 17

CTN :40362541

06 Jun, 2025 NA

Shimla - Himachal Pradesh

Tender For vehicle repair - carriyng the veh to authorised workshop for repair servicingwashing with soap water to remove grease/mud including replacement of defective parts such as engine oil gear oil coolant air oil filter etc attending faults of mechanical electrical nature etc tappet settings if required cleaning and tightening of loose fastener and tune up the engine hub greasing and greasing of parts checking of batteries applying petroleum jelly to battery terminals adding distilled water checking the oil coolant levels of vehicle of mahindra bolero camper complete all as specified and directed by engr in charge note replacement of defective parts engine oil coolant etc which ever is required measured and paid seprately , labour only for repair to wheel and brake system after opening and taking out all four drums from wheel and taking out old unserviceable wheel bearing from front and rear wheels greasing wheel hubs complete filling of brake fluid and bleeding the brake system with brake fluid assembling of wheels and testing the brake system including balancing on computer machine and wheel alignment of mahindra bolero camper vehicle complete for smooth functioning of vehicle on road complete all as specified and directed by engr in charge spare parts which ever is required measured and paid seprately. , supply only for following spare parts , supply only oil filter 1 point 0 nos , supply only air filter 1 point 0 nos , supply only front wiper blade 2 nos , supply only front brake pad 1 point 0 set of 2 , supply only wheel cover 1 point 0 set of 4 , supply only mud guard flap as per sample 4 point 0 nos , supply only brake shoe set 1 point 0 set of 4 , supply only engine oil 7ltrs , supply only transmission oil 2 point 0 ltrs , supply only brake & clutch oil 1 point 0 ltrs , supply only coolant 8 ltrs , supply only distill water for battery 1ltrs

corporations/Associations/Others

CTN :40272655

29 May, 2025 NA

Sirmaur - Himachal Pradesh

Tender For corrigendum : online electronic bids through electronic tendering system (ets) are inviting e-tender in two bid system for tender for the supply of three phase induction motor - three phase induction motor, three phase induction motor suitable for 415 10%, 50hz 5% combined variation 10% , delta connected tefc , ins class f, cooling fan shaft mounted (metallic) ip 55 . duty s1 with bore shaft & key as per is: 12615-2011/iec: 600341 energy eff. class ie2, application fan, h.p 50, kw 37, pole 2 frame size 200l, body cast iron , online greasing provisioning for both side bearings, foot mounted note party shall submit g.a drawing & datasheet curves of motor along with offermake siemens, bch, abb, kirloskar, ngef, havells, hindustan electric, marathon, bbl and cgl, deliver period: the supply has to be made in single manner within 3-4 weeks.

Central Government / Public Sector

CTN :40225486

26 May, 2025 NA

Durgapur - West Bengal

Tender For corrigendum : annual maintenance contract for repair and maintenance of fire fighting equipment at erpl, rajbandh - amc for repair and maintenance of f&s eq, carrying out maintenance and inspection of fire extinguishers on monthly basis including pastings/ marking of maintenance date, clea ning, condition of threads of caps, discharge tubes, sharpness of piercing pin and cylinder body, replacement of defective parts ( iocl supplied), measuring weight and charges for labour, including oiling, greasing, testing as per direction of eic inclusive of al l tools &tackles, consumables, transportation, labour charges etc and measuring instruments for the same as directed by the eic/ si te engineer and submitting the reports of the inspection as per hse manual format (payment of spares not supplied by iocl shall be m ade as per respective items), for 10/9 kg. capacity dcp extinguisher, for 75/70/50 kg. capacity dcp extinguisher, for 4.5 kg. capacity co2 extinguisher, for 6.5 kg. capacity co2 extinguisher, for 2 kg capacity clean agent extinguisher, monthly: checking, inspection, maintenance, greasing, cleaning, oiling, replacement of disc washer, blank cap if any including compl ete overhauling etc. of double headed hydrant valves alongwith all tools, tackles, manpower, material etc. payment for disc washer, coupling washer & blank cap shall be made separately., supplying and fitting of hydrant disc washer as per directions of engineer-in-charge, supplying and fitting of fire hydrant/ fire hose coupling washer, supply and fitting of blank cap (as per is 5290 , red colour with gi chain) suitable for 63 mm hydrant outlet as per direction of ei c, supplying & fitting spindle assembly (gunmetal), repair of adaptor lug of hydrant/ hose inclusive of tools tackels & labour etc., monthly maintenance of 750 gpm monitors: oiling & greasing through grease nipple provided on bearing, worm wheel and worm shaft, cle aning, performance checking for complete vertical and horizontal movement, nozzle movement, water throw, foam suction, ensuring prop er tightning of flanges, clearing the debris around the nozzle etc as per approved procedure including tools & tackles, report submi ssion complete as per direction of site engineer / eic. water resistant low friction synthetic grease, grease gun and all other cons umable etc shall be arranged by vendor. after testing, afff jerry-can must be positioned and replinished near monitor including shif ting, transportation etc., cleaning, maintenance and repair of water cum foam monitor nozzle for fog jet operation by opening and dismantling of nozzle cleanin g by rustoline or kerosene of all the components thoroughly, further inspection of internal parts in the presence of the engineer-in -charge, repair/reconditioning by hand facing, machining, grinding, lapping, etc. and greasing,& reassembly in foam monitors as per direction of eic inclusive of necessary tools, tackles and labour., opening of blind flange of water curtain system of control building, sr tank cleaning of water line, dechoking of spray nozzles, ref ixing it with after testing with new gasket.etc of water spray system of all buildings (on monthly basis) including nozzle dechoking , strainer cleaning and all labour, tools & tackles complete as per direction of the site engineer/ eic. (rates per blind opening), valve maintenance : checking, inspection, greasing, cleaning, oiling etc. of all fire water valves, of all sizes upto 14" including grease and all labour, tools & tackles complete as per direction of site engineer / eic and provided by contractor. all such valves shall be fully closed and opened and restored in origional condition as per advise by eic/ site engineer.note: the valve sizes may vary from 3" to 14". rates are per valve., hydrotesting of fire fighting delivery hose of dia 63 mm on half-yearly basis (type a and b ) by making arrangement of hydraulic pum p, blind, shifting from plant area, bui

Central Government/Public Sector

CTN :40364689

13 Jun, 2025 NA

Multi City - Multi State

Tender For supply, fixing & commissioning of auto greasing system for central lubrication consisting of ssv divider, valves,adopter and steel pipe (without automizer) for tamping bank of unimat-2s/3s machine at cpoh adi.

Central Government/Public Sector

CTN :40346040

06 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For a) upgradation of sewerage underground drain and open drain at barud, dagarkhedi, charkheda khurd, channera and mathela railway colonies and improvement of sewage infrastructure under aden/m/harda. b) itarsi - provision of drain for discharge of itarsi station and colony waste water at khandwa end and et passenger yard towards waste water recycling plant.

CTN :40324385

24 May, 2025 4.09 Lacs

Ramgarh - Jharkhand

Tender For repairing of hoist cylinder (lhs and rhs), centralized greasing system, canopy, mud flap strip and window safety glass of komatsu hd465 dumper sl. no. n10279

CTN :40295812

20 May, 2025 5.74 Lacs

Jind - Haryana

Tender For custom bid for services - outside shed maintenance assistance services-1. maintenance & necessary routine repairs for carousel & other on-line equipment & maintaining necessary records of their calibration, 2. maintenance & necessary repairs for smooth operation of chain conveyor system in the plant, 3. maintenance and necessary repairs of other equipment in the filling/storage shed., 4. maintenance of major plant equipment: carrying out `a' check maintenance of major equipment involving visual inspection, checking oil level, checking drive belt tension, greasing of moving components as & when required, checking and correcting of leakages from any joints. it will involve the following equipment: (a) air compressors (04 nos.) (b) lpg pumps (03 nos.) (c) lpg compressors (03 nos.) (d) fire engines (06 nos.) (e) jockey air compressor (02 no.) (f) jockey pumps (02 no.) (g) service water pumps (02 nos.) (h) tt gantry bays (6 nos), 5. maintenance of miscellaneous & special equipment. this involves providing technically suitable carrying out to maintain & repair (if required) of the following equipment: (a) remote operated valves (b) lpg line (vapour and liquid) gate valves, ball valves (of all sizes) (c) solenoid valves (d) frl units (all along the airlines) (e) valve crushing machine (f) valve salvaging setup (g) cylinder hydro testing machine (h) pneumatic valve testing machine. (i) paint booth (j) hydrant points and jet monitors (fixed and movable) (k) compressed air line gate valves, ball valves (all sizes) (l) service water line gate valves, ball valves (all sizes) (m) regulator test bench (n) cylinder crushing machine (o) mechanical parts of equipment related to mounded storage vessel. (p) stationary filling scales for industrial cylinder filling. (q) online degassing machine, 6. up keeping of maintenance store: this involves upkeeping of maintenance store, maintaining all records, proper stacking of material in the maintenance store. inventory log book to be maintained for the movement of items in the maintenance store. all the movements of item should be noted in inventory log book. inventory of items in the maintenance store should be match with quantity of inventory log book. party will be responsible for any variation in the inventory of items. this amount is debited to the party. welding related will also be required from fitter as on when required. 1. fabrication of ms structures like angles, bends, tees, plates, beams, channels of various sizes including scrapping & applying two coats of red oxide primer and paint to the structure. 2. removal / fixing of cast iron gate / plug/ ball valves on the pipeline. the size of the gate valves varies from 1" to 16" dia . the valves & nut bolts required for the job will be supplied by hpcl. the shifting of valve from one site to another site within installation premises shall be in contractor's scope. 3. dismantling / removal and laying of ms (erw as well as seamless) pipeline. the maximum height of the pipe line position may be 20 meters. the size of the pipeline varies from 1/2" dia to 16" dia. the shifting of pipelines from one site to another site within installation premises shall be in contractor's scope. 4. welding in ms pipeline having diameter up to 16". 5. fabrication / casting of ms reducer / enlarger of various sizes up to 10" dia and vice versa. all the material required for the job except welding rod, welding machine shall be supplied by hpcl. 6. fabrication & welding of chain conveyor system. 7. allied welding & fabrication jobs in dg shed, mcc panel, air & lpg compressor shed, pump house, cylinder filling/storage shed, fire pump house & cylinder retesting shed.

Recycling Plant Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector