Get complete information related to latest Reducer Socket Pipe Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Reducer Socket Pipe Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Reducer Socket Pipe Tenders.
Tender For repair / replacement of valve pit chambers, joints, laggings and other connected works at technical area and underground pipe lines, centrifugal pump sets and various assests installed at water supply installation and other miscellaneous works under ge (af) s
Tender For corrigendum : non-destructive examination of various equipments and process piping at hwpk site during mta-2025 - ultrasonic flaw detection of weldments on towers, tanks, equipment, nozzles, large dia gas lines and process pipe lines as per standard practice using reputed make ut flaw detector probes by asnt/isnt ut level ii/iii qualified and experienced persons including surface preparation with pre/post cleaning of weldments, interpretation of data and submission of reports., ultrasonic flaw detection of weldments on towers, tanks, equipment, nozzles, large dia gas lines and process pipe lines as per standard practice using reputed make ut flaw detector probes by asnt/isnt ut level ii/iii qualified and experienced persons including surface preparation with pre/post cleaning of weldments, interpretation of data and submission of reports., thickness measurement/mapping with grid marking at identified locations of xu towers/tanks and piping using standard ut thickness gauges and probe by asnt/isnt ut level ii/iii qualified and experienced persons including surface preparation with pre/ post cleaning, interpretation of data and submission of reports., phased array ultrasonic testing/time of flight diffraction of weld joints of exchange unit towers / tanks /pipelines as per standard practice using standard equipment and probes by asnt/isnt ut level ii/iii qualified and experienced persons including surface preparation with pre/post cleaning of weldments, interpretation of data, preparation and submission of reports ., liquid penetrant testing of weldments of heat exchangers, stiffening rings, equipment skirt/saddle supports, equipment nozzles d of xu towers, tanks and weldments of pipe lines (including supply of consumables and dp kit) by asnt/ isnt lpt level ii/iii qualified and experienced persons including surface preparation with pre/post cleaning of weldments and submission of reports, liquid penetrant testing of weldments of heat exchangers, stiffening rings, equipment skirt/saddle supports, equipment nozzles d of xu towers, tanks and weldments of pipe lines (including supply of consumables and dp kit) by asnt/ isnt lpt level ii/iii qualified and experienced persons including surface preparation with pre/post cleaning of weldments and submission of reports, long range ultrasonic testing (lrut) of process liquid piping and large dia gas piping connected to tower and tank with in 1st isolation valve of size from 4 inch nb to 36 inch dia.
Tender For supply of vrf air conditioning works at state bank of india administrative office lucknow c c - 20 hp outdoor vrv or vrf , 10 hp outdoor vrv or vrf , 4 way 4.0 tr vrf cassette indoor , 4 way 2.0 tr vrf cassette indoor , 4 way 1.35 tr vrf cassette indoor , hi wall 1.35 , y joints , installation of vrv or vrf outdoor , installation of casssette vrv or vrf indoor , installation of hi wall split ac , commisioning of complete vrf system , refrigerant piping 28.6 mm , refrigerant piping 22.2 mm , refrigerant piping 19.1 mm , refrigerant piping 15.9 mm , refrigerant piping 12.7 mm , refrigerant piping 9.5 mm , refrigerant piping 6.4 mm , drain pipe 32 mm , drain pipe 25 mm , control and transmission wiring , ms sloted angle for pipe paying , sitc of 5 star 2 ton cassette a c , copper pipe refrigerant piping for 1.5 or 2 tr , 5 kva automatic stabilizer , interconnecting standard wire cable , outdoor stand for vrv or vrf 20 hp , outdoor stand for vrv or vrf 10 hp
Tender For supply and fitment of retro fitment of twin pipe in all wagons for air brake system to rds o specification 02 -abr-02 with amendment no. 4 of sept -2016 or latest ,pipes and joints for air brakes to rds o specification 04-abr-2002 with amendment no. 8 of sept -2016 or latest (supply of items and scope of work as per enclosed annexure a and b ) [ warranty period: 24 months after the date of delivery ]
Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi
Tender For supply of will be 600 x 450 mm with powder coated aluminium frame , sun shade a sun shades 900 x 300 mm for ventilators , sun shade b sun shades 1215 x 550 mm for main doors , self tapping screw 4 inch , self tapping screw 3 inch , rivet full size , nut bolt of size 12mm dia 75mm long with washer , nut bolt of size 12mm dia 125mm long with washer , nut bolt of size 12mm dia 150mm long with washer , 20w led tube light fiting with electronic ballasts and bipin holder and connector and block and etc complete with all accessories , bulk head fitting with 8w short body cfl , modular pvc square box 4 x 4 inch , angle holder , led bulb 15 watt , mcb box 2 way spn , mcb 10 to 32 amp sp , modular switch socket combine 5 oblique 15 amp , star screw full thread 25mm each packet 100 , change over switch 32 amp , tape insulation one and half x 15 mtr with isi mark , wire single core copper conductor 1 point 5 sqmm , elect wire two core copper conductor 6 sqmm , modular switch piano and flush type 5 amp , modular pvc switch board 6x4 inch , ceiling rose , pvc casing and capping of size 25mm , pvc casing and capping of size 25 mm tee , pvc casing and capping of size 25 mm elbow , pvc casing and capping of size 25 mm common for joints , flexible pipe 25mm , lightening conductor made of copper tube 1500mm long x 25mm dia with five copper prongs of length 150mm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , vitreous china squatting pan iwc orissa pattern and size 680 x 470 mm white with integral foot rests and complete fixing arrangement including vitreous china valveless , vitreous china wash hand basin pedestal type angle back white and flat back and pedestal pype size 580 mm x 450 mm including bracket and pvc connections and waste pipe and 15mm bore cp pillar taps , vitreous china bowl urinal flat back size of 465 mm x 355 mm x265mm white including bracket and waste pipe and urinal spreader with pvc connections and connection pipe , p trap 100mm dia for wc of isi mark , pvc pipe 110 mm dia , pvc y oblique t junction 110mm dia , pvc socket 110 mm dia , pvc swr bend plain 110mm dia , ppr pipe pn 16 oblique sdr 7 point 4 and 3 layer 20mm , ppr pipe pn 16 oblique sdr 7point 4 and 3 layer 32 mm dia , ppr reducer 32 x 20mm outer dia , ppr reducer tee 32 x 20mm outer , ppr union 32mm dia , ppr socket 32mm dia , ppr tee 32mm outer , ppr elbow 32mm isi mark , ppr end cap 32mm dia , ppr socket 20mm dia , ppr elbow 20mm , ppr t 20mm outer dia , pvc floor trap 3 inch dia , pvc pipe 3 inch dia , pvc elbow 75mm dia , pvc t 75mm dia , ppr tank connector inner dia 32mm , ppr gate valve 32mm outer dia , bathroom cabinet ptmt cabinet with looking mirror for toiletry items of size 330mm x 140mm x 530mm with arrangements to fix the same with wall , sealing thread , ppr female threaded elbow inner dia 20mm , ppr female threaded socket dia 20mm , ppr female threaded tee inner dia 20mm , pvc connection pipe 2 feet long with 2 brass nut and bolt , pvc door bend 110mm dia outer dia , pvc tee 110mm dia , m seal , pvc gel 100ml each , taplone tape , ppr wall clamp dia 25mm , ppr wall clamp dia 32mm , cp bib cock 15mm bore long body , cp angle valve chromium plated steel 15 mm bore , cp stop valve chromium plated steel 15 mm bore , cp pillar tap 15 mm bore , ss soap dish holder , cp towel rail 24 mm dia and 600 mm long with fixing fixing arrangement , pre fabricated //bid details 2 / 75 ms angle 65 x 65 x 5mm with cross bracing between all the four sides of ms angle 40x50x5mm staging for frp tank 500ltr as per tech specs and drg attached , hdpe oblique pvc water tank 500 ltrs and triple layer and including float valve and accessories , cgi sheet 3000 x 900mm x 0 point 60mm of isi mark , gi pipe 2400mm long and 50 mm dia and 1 point 5mm thick , field water heating devices