Get complete information related to latest Refinerie Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Refinerie Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Refinerie Tenders.
Tender For custom bid for services -calibration services; annual maintenance contract (amc) for ground support equipment (gse) and electrical equipment held with icgae puducherry and 848 sqn (cg) shall cover the following salient features: - 1. to maintain all the gse in good working /serviceable condition at all times as per appendix a , b & c 2. one supervisor (diploma equivalent) along with 01 labor technicians to be placed at coast guard air enclave for the daily routine/ monitoring of amc jobs on gse. 3. replacement of all consumables including various graded oil, seals, filters, belts, pneumatic hose, wheels & rubber beading etc. at seller cost as per scope of work / scheduled of requirements. the consumables and oil should be oem specified wherever applicable and for other cases locally available standard quality item which has been checked and cleared for use by station qa cell. 4. painting of gse twice a year in yellow colour paint (two times in entire contract) as per cgae directives after complete removal of old paint to the bare metal and application of new paint up to 50 m on appendix- a s/l-40, 41 and appendix- b s/l 01-04 & 8. painting is not to be undertaken on nuts, bolts, screws and it is to be applied with only approved grease. 5. recharging of nitrogen cylinder (max. 3000 psi with 99.9% purity n2) as mentioned below from central/state govt certified local agency/govt agency with documentary proof for records post n2 charging. hst of cylinder & lp compressor are also to be carried out whenever due with documentary proof. 5.1 appendix- a s/l-02:- 5-6 times per year, max. 3000 psi with 99.9% purity n2 as and when cylinder pressure is less than 500 psi. 5.2 appendix- a s/l-17:- (portable tyre charging rig) 4 times per year. 6. calibration of gauges fitted on gse to be carried out from nabl certified labs as mentioned in appendix a , b & c and certificate to be provided. 7. the scope of works shall include the repairs/ servicing of all the component/equipment of gse including consumables/spares (required for repairing/servicing) the amc firm will bear the cost of repairs of equipment limited to 10% cost of contracted value . 8. in case unit is not satisfied by the service provided by the firm, amc will be terminated after giving warning letter/ notice of one month. it is to be clearly understood that during the grace period of one month, firm will continue to provide services. 9. if the defect / fault is not rectified within 72 hours of its occurrence, this unit deliberate will reserve the right to deduct the proportionate amount for the unserviceability period. 2 10. all the personnel employed for maintenance duty are to be in possession of the following: 10.1 aadhar card and company identity card. 10.2 no police case/vigilance case certificate. 10.3 two sets of uniforms with name of firm embossed/ embroidered on uniform for ease of identification. 10.4 safety shoes, safety gloves, safety helmet, safety goggles of standard quality to be provided to all persons. 11. safety and security of the personnel employed is the responsibility of the firm and any minor or major injury occurring to the individual is not the responsibility of the cgae puducherry or 848 squadron personnel. 12. working hours of the personnel are from 0900-1730 hrs (06 days in week) and they are to provide their contact number to the respective section in charge of gse for contact.
Tender For supply of item no.1) (uvam id.2100012) blower scavenge for traction motor & oil cooler along with motor for oil types of 3 phase locos as per clw spec. no. clw/es/3/0021/h or latest and rdso specn. no. e-10/3/09 [motor] with amendment nos. 01 to 06 or latest.item no. 2) (uvam id.2100034)traction motor blower including motor (wound with corona resistance wire) to specn. nos. clw/es/3/0019/g or latest and rdso spec. no. e-10/3/09 motor with amendment nos. 01 to 06 or latest.item no. 3) (uvam id.2100013)oil cooling blower unit complete with casing and blower for 3-phase wag-9 locos as per clw specn. no. clw/es/3/0647, alt-e or latest and rdso specification no. rdso/2016/el/spec/0123, rev.0 or latest.item no.4) (uvam ido.2100003)machine room blower with motor as per clw spec. no. clw/es/3/0020 alt-h or latest.item no.5) (uvam id.2100006)scavenge blower to machine room as per clw specification no. clw/es/3/0022 alt-h or latest and motor for scavenge blower (mr) (wound with corona resistance wire) as per rdso specification no. spec/e-10/3/09 motor with amendment nos. 01 to 06 or latest.
Tender For supply of lab item - ddpcr supermix for probes , pipet tips for the autodg , ddpcr 96 well plates , automated droplet generation oil , dg32 cartridges for autodg
Tender For supply of flexible copper trailing cables d d - item 10 , item 20 , item 30 , item 40 , item 50 , item 60 cable,trg,atc,3.3kv gr,3.5cx50mm2,is9968 size & tvpe 3.5cx50 sq. mm 3.3 kv grade flexible atc conductor of class-s, epr le-3, insulated &black hofr nbr pvc type se-4 sheathed flexible trailing cable suitable for reeling/un-reeling operation. cable type- flexible, standard: is 9968(part 2) 2002 d.c. resistance at 20deg. c (ohms/km) power core max- 0.393 earth core max - 0.795. annealing test in %- (before stranding) 13.5 %. per sulphate test in g/m2- max. 5.00. conductor screeninq power core only material approx thickness mm - extruded semiconducting compound/ extruded semi conducting tape- 0.80. conductor material: annealed tinned copper, 6.6 klv grade, cable type: flexible, standard: is 9968(part 2) 2002 tests on insulation thickness (nom) mm core ldentification - power core-2.20 colour rpct red, yellow & blue for power cores & green for earth core tensile strength before ageing n/mm2- min.4.20 % variation after ageing (air oven)- max. +-30% % variation after ageing in (air-bb)- max. +- 30%. elongation before ageing in % - min.200% % variation after ageing (air oven)- max. +- 30% % variation after ageing in (air-bb)- max. +- 30%. hot set test hot set elongation- 175% permanent set 15%. lnsulation resistance constant (min.) m ohm km. at 27deg.c- min. 3670 at 90 deg.c-min 3.67. thick of lnner sheath min 2.00 mm. rein forcement- open braid of textile material physical test on outer sheath thickness (nom) / min mm- 3.50/ 2.60 colour black, over all diameter of cable mm- 52.00+-3.00. tensile strength ) /bid number : gem/2025/b/6811700 * /dated: 24-10-2025 & & / bid document 1 / 22 before ageing n/mm2 - min. 11.0 at 2oo elongation 4n/ sq. mm. % variation after ageing in (air-bb)-max. +- 50% elongation before ageing in %- min.250% % variation after ageing in (air-bb)- max. + 50%. hot set test hot set elongation- max.175% permanent set- max 15. oil resistance test variation in % in tensile strength- max. +-40% variation in % in elongation-max. +-40%. tear resistance in n/mm - min.5.0. flammability test period of burning after removal of flame- max. 60 sec. min unaffected portion from the lower edge of the top clamp - min 50 mm. test high voltage at room temp- 10 kv ac for 4 hours. water absorption test increase in capacitance 1 to 14 days max- 6% 7 to 14 days max- 2.5%., control trailing cable 12 c x 2.5 3 p x 1.5 (pair screened) 2 voltage grade 1.1 kv 3 reference standard generally confirming to is: 9968 (part- 1)1998 4 conductor a. material to is:8130/84 annealed tinned copper b. nominal area of cross section(sq. mm) i)-unscreened core (sq. mm.) 2.5 ii) - screened pair (sq. mm.) 1.5 c. flexibility class as per is:8130/84 class-5 d. maximum dc resistance of conductor at 20 deg. c i)-unscreened core (ohms/km) 8.21 ii)- screened pair (ohms/km) 13.7 5 insulation i) material epr type ie-2 to is:6380/84 ii) nominal thickness (mm) 1.0 6 two cores of 1.5 sq. mm. size twisted together to form a pair yes. 7 individual pair screening each pair of 1.5 sq. mm. size taped with rpct, screened with 0.2 mm nom dia of annealed tinned copper wires braid, taped with melinex tape. yes. 8 no of cores / pair i)-unscreened cores 12 ii)-screened pairs 3 9 identification of power cores by number printing on cores. 10 laying up (i) three screened pairs laid up together, taped with rubber proofed cotton tape to form group as "a" (ii) 12 unscreened control cores laid up together around group as "a" of screened pairs and taped with rubber proofed cotton tape applied with open spiral. 11 inner sheath a) material to is: 6380/84 hd hofr csp type se-4 b) minimum thickness (mm) 1.6 12 an open braid of nylon cord reinforced in between inner and outer sheath. yes. 13 outer sheath a) material to is: 6380/84 hd hofr csp type se-4 b) nominal thickness (mm) 2.5 14 nom. overall diameter of cable (mm) 33.0 tolerance on nom. overall diameter (mm)
Tender For supply of jacking oil pump - axial piston pump a4vso 125 dr 30r-fpb13n00 pump shall be set at 285bar as per specification attached , seal kit for for axial piston pump a4vso 125 dr 30r- fpb13n00 as pr specification attached , pressure relief valve. dbds 30p1x 315 set pressure of prv is 315 bar. rexroth material number-r900423715 , check valve, s30 a 1.0.rexroth material number-r983030676 , inline filter body 350le0150-g25b00-v5.0-m-r4-z1. rexroth material number-r908019490 , filter elements for inline filter 350le0150-g25b00-v5.0-m- r4-z1. filter element-2.0150 g25-b00-0-m material number r928022324 , seal kit for for inline filter 350le0150-g25b00-v5.0-m-r4-z1. one set consists of each item of pos. 30, pos40 and pos 150 seal kit material number-r928028530 , clogging indicator. rexroth material number-r928028410-we-2sp-m12x1