Latest reflective sheet Tenders | Government reflective sheet Tenders

Central Government/Public Sector

CTN :40473217

29 May, 2025 NA

Delhi - Delhi

Tender For supply of (ami no. 26dr 006/25-26) medium (17*15*3.2cm) polyurethane ester foam dressing kit which has (hydrophobic foam for fast granulation) polyurethane ester foam in spiral cut sheet for su ction unit with pressure of -25mm hg to -200 mm hg for instillation (not irrigation), 2 pieces of foam along 6 drape and two canister of 500 ml each (containing sodium polyacrylate to covert exudate in to gel, so no cross contamination ) with at least 5 or more lumens tube to prevent leakage and blo ckage, one cassette for solution distribution and two alcohol-free liquid barrier film that protects per i wound skin and at least 5 or more lumens in trac pad which will be used for instillation therapy un it . bis /us fda approved/ european ce approved by an agency with 4 digit notification approved qual ity. measurements +/- 10% ]

CTN :40141352

28 May, 2025 NA

East Sikkim - Sikkim

Tender For bid to ras supply of road furniture - solar delinator solar edge indicator size 1200 mmas per irc 67 2022 technical details of solar guide posts made of mild steel of 75 76 od and 1.5mm thickness with pure polyester powder coating with the minimum thickness of powder coating of not less than 60 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts should have a circular design with the height of 900 mm above the ground and 300mm base underground total 1200mm.the guide post shall have 8 red leds on equalivant gap total 48leds for brighter viewing of the motorists in fog. the leds shall start blinking as it gets dim. the solar delineator shall have solar panel on top of the surface for recharging. further it should have 2 strips of 150mm each of type xi sheeting specifications as per irc 67 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time also. , delinators size 1200mm as per irc 67 2022 roadway indicators as guide poles guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion the surface should be concealed so that there should not be any exposed surface without powder coating the posts shall have an ellipsoidal design with the height of the pole shall be 900 mm above the ground with about 300mm base which can be anchored onto the ground as per irc 79 2019 mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves as per fig 1 of irc 79 2019 , delinators size 900 1000 mm as per irc 67 2022 roadway indicators as guide poles. guide posts made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. the surface should be concealed so that there should not be any exposed surface without powder coating. the posts shall have an ellipsoidal design with the height of the pole shall be 800 mm above the ground with about 200mm base which can be anchored onto the ground as per irc 79 2019. mild steel guide poles shall conform to type 11 reflective sheeting specifications as per irc 67 2022 and astm d 4956 which would ensure to obtain clear visibility of the road alignment during night time. to achieve enhanced visibility of the curved portion of the road guide poles shall have substantial area allocated to exihibit alternate band of black paint and white retroreflective sheeting. the above arrangement shall be in place in both sides of the poles in the case of undivided carriageways having sharp curves. as per fig 1 of irc 79 2019 , retroreflective tape 2 inch red 45 mtrs per roll , retroreflective tape 2inch yellow 45 mtrs per roll , retroreflective tape 2inch green 45 mtrs per roll , retroreflective tape 2 inch white 45 mtrs per roll , convex mirror size 40 inch or higher mirror thickness 05 mm or higher with mild steel pipe fittings length 98 inch dia 5 inch post suitable for convex morror mounting. , speed limit 40 kmph caution sign board of size 600 mm as per irc 67 2022 , speed limit 30 kmph caution sign board of size 600 mm as per irc 67 2022 , u turn prohibited caution sign board of size 600 mm as per irc 67 2022 , give way caution sign board of size 600 mm as per irc 67 2022 , stop caution sign board of size 600 mm as per irc 67 2022 , falling rocks caution sign board of size 600 mm as per irc 67 2022 , overtaking pro

CTN :40462535

09 Jun, 2025 NA

Multi City - Andhra Pradesh

Tender For procurement of u-foam (flexible polyurethane foam) cylindrical foam balls

State Government

CTN :40407665

19 Jun, 2025 624

Bengaluru - Karnataka

Tender For supply of tablets, injections, and suture materials items for the year 2025-26 - skt inj 15 lacks i.u , teny 50mg tablet, retelex 18mg injection, eptifibatide inj 75 mg/100 ml, somatostatin3mg, synthetic absorbablesutures antibacterial, triclosan coated-polyglactin size 3-0 with20mm 1/2 circle round body needle, suturelength 70cm, microcool breathable highperformance gown withtowel (large and extra large), lignocainespray 4percentage, urograffin-20ml, omega3 fatty acid 10 percent 50--ml/iv, wound care irrigation & cleansing solution-500 ml irrigation bag with closed system, wound care irrigation & cleansing solution-250 ml spray, aqua gel spray in aerosol , wound care aqua gel tube aqua gel, wound care irrigation & cleansing solution, triple hydrocolloid based hydroactive gel for autolytic debridement used for necrotic tissue debridement 30gm , translucent foam dressings with waterproof, viral, bacterial barrier, polyurethane top layer with perforated gentle silicone adhesive, ce, iso & fda approved 10x20cm, translucent foam dressings with waterproof, viral, bacterial barrier, polyurethane top layer with perforated gentle silicone adhesive, ce, iso & fda approved 10x10cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with sustained and demand antimicrobial activity with high exudate management capability and self adherent water proof moist wound dressing made up of triple hydrocolloid elastomeric polymer matrix pectin, gelatin & sodium carboxymethyl cellulose. size 9x30cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with sustained and demand antimicrobial activity with high exudate management capability and self adherent water proof moist wound dressing made up of triple hydrocolloid elastomeric polymer matrix pectin, gelatin & sodium carboxymethyl cellulose. size 9x15cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with chelating agent edta and surfactant bec, ce,iso & fda approved 10x10cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with chelating agent edta and surfactant bec, ce,iso & fda approved 15x15cm, stitch bonded hydrofiber dressing with 1.2% w/w impregnated ionic silver with broad spectrum bactericidal efficacy & gel forming technology, ce, iso & fda approved 2x45cm, lubricating deodorant spray conataining water, pine apple oil, eucalyptus oil, extract of lavender, sorbitan mololaureate, glycerol used for liquifying hard stools in stoma bags and provides jasmine fragrance 236ml, triple hydrocolloid (nacmc, gelatin & pectin) matrix, elastomeric polymers, extra foam pad water proof adhesive dressing thickness of 2.5mm used for pressure ulcers and dry wound, ce, iso & fda approved 10x10cm, triple hydrocolloid (nacmc, gelatin & pectin) matrix, elastomeric polymers, water proof adhesive dressing thickness of 0.5mm used for exoriated skin, acute wounds, skin abrasions, pressure ulcers/dry wound ce, iso & fda approved 10x10cm, sting freenon-alcoholic skin protection dressing remover spray with triple silicone 100% blend of hexamethyldisiloxane (hmdso) trimethylsiloxane (tms) and octamethyltrisiloxane free from oils, fragrance & preservatives used for strong adhesive dressings without causing pain and skin tear 50ml, sting free non-alcoholic skin protection barrier spray with triple silicone 100% blend of hexamethyldisiloxane (hmdso) trimethylsiloxane (tms) and zanthalene free from oil, fragrance & preservatives 28ml, standard opaque drain pouch 12 inch with charcoal filter embedded with one side transparent hydrophobic natural fibre comfort panel with integrated velcro tail closure 57mm, scissor free triple hydrocolloid (nacmc, gelatin, pectin) based flexible tape collar skin barrier/base plate with elastomeric polymers, plasticizers, tackifiers, adaptable to different size stoma forming leak proof turtle necking used for deep/retracted stomas

Central Government And Public Sector

CTN :40437004

31 May, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of office furniture for different locations of ihb up state - executive table with pedestaloverall size executive table top 25 mm ppb , 0.6 mm thick post formed laminate , 1 mm thick bdl , 2 mm pvc , modesty 18 mm thick ppb , clad 1.0 mm dl size : 1800 w x 900 d x 740 h size shall be 1800 width mm x 900 depth mm x 740 height mm .table top shall be 25 mm thick plain particle board (ppb) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .flat edge duly sealed with 2 mm thick pvc beading. the modesty shall be 18 mm thick plain particle board ( ) ppb clad with 1.0 mm thick decorative laminate (dl) on both sides. edge sealed with 2 mm thick pvc beading. with standard size pedestal, executive chairoverall size mid back back: 47.7 cm. (w) x 60.1 cm. (d), seat: 47.0 cm. (w) x 48.0 cm. (d)overall dimensions of chair seat height -43.1-53.1cm height -96.5-114.0.cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm 1) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45 2 kg/m3,and hardness load 16 2 kgf as per is:7888 for 25% compression. seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9 0.03cm x 0.16 0.0128cm. it upholstered with leatherette.(d) *mid back size: 47.7 cm. (w) x 60.1 cm. (d) 3) armrests (fu3301/fu3302) : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 0.03 cm x 0.2 0.01 cm thk m.s. e.r.w tube having chrome plated finish. the armrest height adjustable up to 6.5 0.5cm in 5 steps. 4) active bio-synchro mechanism (fu3301/fu3302): the adjustable tilting mechanism should be designed with the following features: 360 revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. tilt tension adjustment can be operated in seating position. 5-position tilt limiter giving option of variable tilt angle to the chair. seat/back tilting ratio of 1: 2 the mechanism housing should be made up of hpdc aluminium black powder coated. 5) seat depth adjustment (fu3301/fu3302): seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0 0.5 cm. 6) adjustable back support (fu3301/fu3302): back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42 0.5 cm for the comfortable back support to suit individual need. 7) pneumatic ht. adjustment (fu3301/fu3302): the pneumatic ht adjustment has an adjustment stroke of 10.0 0.3 cm. 8) pedestal assembly (fu3301/fu3302): the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-centre dia.(75.0 1.0cm. with castors.) 9) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter., visitor chair with armsoverall size visitor: back: (w)47.5 cm x (h)58.0cm, seat : (w)47.0cm x (d) 48.0cmoverall dimensions of chair seat height - 46.5cm.height - 89.5cm. width & depth of chair as measured from pedestal - width-61.4 cm and depth-64.5 cm. 1.seat/back assembly: the seat and back should be made up of 1.2 0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. (w) x58.0 cm (h) seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 2 kg/

CTN :40427134

11 Jun, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of furniture -the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 50cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. it shall have center tilt synchro mechanism, 360 degree revolvingtype, 3 position locking system with anti-shock feature. the headrest is injection moulded in glass filled polypropylenewhich is upholstered with foam and fabric. the pneumatic height adjustment is chrome plated with an adjustmentstroke of 9cm. the pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors.the pedestal is 65cm pcd. the overall dimension of the chair shall be 75cm x 75cm x (115-130cm). seat height shall be44.5cm to 53.5cm.this shall come with sliding seat, which helps user adjusting the seat depth as per the user size andneeds. the product shall be certified with the following: cii greenpro, ul greenguard, scs indoor advantagegold, bifma level 2. the work shall be done strictly as per drawing and direction of engineer-in-charge , the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 550cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. the chrome plated tubular frame is made of dia. 2.8cm x 0.2cmthick ms round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. theoverall dimensions of the frame shall be 63.5cm x 59.5cm x 97.5cm. the seat height shall be 42.5cm. the product shallbe certified with the following: cii greenpro, ul greenguard, scs indoor advantage gold, bifma level 2. thefurniture quotation for ae & je civil - hindan airforcefor assistant engineer room:2work shall be done strictly as per drawing and direction of engineer-in-charge. , providing and placing in positionmain table with side table. overall size shall be 2350mm(l) x 1200mm(d) x 750mm(h) with sidetable of size 1250mm(l) x 500mm(d) x 750mm(h). the main table and side table tops are made of 25mm thick mdf with bottomside pre-laminate board confirming to is-14587:1998 and 0.4mm pvc membrane pressed on to top. soft closing access flap withinbuild power box are provided on work surface for wire management. the modesty panel is made of 25mm thick mdf - one side prelaminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top. the understructure is made of 25mmthick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2mmthick pvc lipping. the drawer unit is made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirmingto is-12823:1990, edge banded with matching 2mm thick pvc lipping. drawer units - drawer fronts made of 25mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pv

corporations/Associations/Others

CTN :40391388

29 May, 2025 NA

Bhavnagar - Gujarat

Tender For supply of automotive vehicles - retro - reflective sheets and tapes (traffic safety) as per is 14221 (q4)

CTN :40013312

26 May, 2025 NA

Leh - Jammu And Kashmir

Tender For bid to ras supply of furniture items - double bunk of size1830mm l x 930mm w x 1830mm h fabrication and supply of double bunk ms of size1830mm l x 930mm w x 1830mm , steel almirah hight more than 1260mm width more than 450mm length more than 750mm , cotton sandwich mattress size 1800mm 900mm 100mm the pu foam density of the mattress should be 40kg oblique 3kg and above incl mattress cover made of poly fabric 15 mm thick , cotton sandwich mattress size 2000mm x 900mm x 100mm the pu foam density of the mattress should be 40 kg oblique 3 and above incl mattress cover of 15mm thick made of polyfebric and waterproof , storage rack shall be fabricated of size 1524mmx610mm and height 2135mm with four compartments the complete frame work will be made of using ms angle of section 40mmx40mmx5mm thick , stainless steel single bunk of size 2000mm l x 900 mm w x 400mm h and 900mm h at head side and leg side as shown in drawing and stainless steel will be of grade 304 , steel cupboard height more than 1930mm width more than 440 mm length more than 905 mm , steel almirah height more than 1930mm width more than 440 mm length more than 905 mm , racks of size 1000mm x 600mm of height 915mm with two compartments , pvc chairs with cushion at bottom and back rest plastic , study table size 1050mm x 750mm x 750mm manufacture and supply of study table of size 1050mm x 750mm x 750mm shall be provided length x width x height made of mild steel , office table size 1500mm x 900mm x 750mm manufacture and supply of office table of size 1500mm x 900mm x 750mm shall be provided length x width x height made of mild steel , office chair executive medium back with nylon base armrest and adjustable height or equivalent in design and specifications complete pilot sample of office chair complete , computer table manufacture and supply of computer table of size 1200mm x 600mm x 750mm length x width x height , computer chair executive medium back with nylon base without armrest and adjustable height and specifications complete in all aspects pilot sample of computer chair complete , cotton sandwich mattress covers 1800 x 900x18 mm waterproof polyurethane

Central Government/Public Sector

CTN :40460809

16 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of yellow retro reflective sheet [supply of yellow retro reflective sheet for lc boom prismatic grade reflective sheet of size 305 x 290 mm one set consist of 18 pieces]

Central Government / Public Sector

CTN :40461550

28 May, 2025 NA

Vijayawada - Andhra Pradesh

Tender For industrial safety shoes with steel toe as per bis: 15298 :2016 (latest). break-up of shoes as total qty:: male- 263 pairs and female- 20 pairs. break up of shoes sizes for male- shoe size: 6 - 04 pairs, shoe size: 7 - 42 pairs, shoe size: 8 - 103 pairs, shoe size: 9 - 70 pairs, shoe size: 10 - 27 pairs, shoe size: 11 - 15 pairs, shoe size: 13 - 01 pair, shoe size: 14 - 01 pair. break up of shoes sizes for female, shoe size: 5 - 01 pair, shoe size: 6 - 06 pairs, shoe size: 7 - 05 pairs, shoe size: 8 - 04 pairs, shoe size: 9 - 03 pairs, shoe size: 10 - 01 pair. total : 283 pairs.design-a (low shoe), type: sb, upper material for class 1 footwear-leather, toe cap- steel (metallic), pattern: derby, closing: laces(nylon), sole design: cleated, construction: single certification: bis, as per clause 5.3.5.2 of is 15298 ( part 2 ) - slip resistance on ceramic tile floor with sodium lauryl sulphate (nals) solution ,as per clause 5.3.5.3 of is 15298 ( part 2 ) - slip resistance on steel floor with glycerin ,as per clause 5.3.5.4 of is 15298 ( part 2 ) - slip resistance on ceramic tile floor with nals and on steel floor with glycerin, breaking load of laces (min) 600 n, collar collar with pu foam padding, 15 mm thick, density 25 kg per cubic meter, all specification should be as per attached gem catalogue. (1) note: one sample got approved before bulk supply. (2) central govt./nabl/ahsp/ilac test report should be produced along with material. (3) sole description/material-direct moulded double density polyurethane. (4) vamp lining material: leather (5)lining:yes (6) oem/authorised dealers of oem only to quote(7)make: bata/liberty/allen cooper/ hilson..

Reflective Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector