Latest reflective sign board Tenders | Government reflective sign board Tenders

Central Government And Public Sector

CTN :40703128

05 Jul, 2025 4.22 Lacs

Jaipur - Rajasthan

Tender For supply of two loop fire alarm panel , intelligent addressable thermal detector , intelligent analog addressable photothermal detector , intelligent addressable programmable sounder , addressable manual call point , response indicator , fault isolator , 2x1.5 sqmm fire alarm armoured cable , co2 type fire extinguisher 4.5 kg , fire extinguisher, abc type 5kg type , trolley mounted 22.5 kg co-2 type fire extinguisher , exit signage , identification of afd manual call point with symbol , staircase steps up or down direction with symbol , room indication signage , led slim exit or egress lights

CTN :40627871

18 Jun, 2025 37.84 Lacs

Jhajha - Bihar

Tender For mr-n-24-25- jhajha-01 (kiyajori to jogiyatilha) - kiyajori to jogiyatilha clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification clause 303.1., for 100 m lead @ 80 %, for 100 m lead @ 20 %, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less than 150kg/cm, opc to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant , trasported to site, laid with a paver with electronic sensor , compacting with 8-10 tonnes vibrartory roller, finishing and curing., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum s

CTN :40691865

18 Jun, 2025 9.63 Crore

Sasaram - Bihar

Tender For mr-n/24-25 sasaram-02/01 - l068-t05 to panrwa (vr37), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade 2) : construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam with stone screening gr-ii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., water bound macadam gr iii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.2 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capasity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion ,construction joints, ap

Central Government/Public Sector

CTN :40372578

16 Jun, 2025 24.38 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For corrigendum : provision of 02 x soakage wells alongwith 02xseptic tanks in unit area in the aor of age b/r-i and retro reflective sign boards, addn/altn of building no p-01 at corps offrs mess in the aor of age b/r-ii under ge 865 ews

CTN :40066427

10 Jun, 2025 NA

Leh - Jammu And Kashmir

Tender For corrigendum : tender for supply of road furniture items - overhead gantry as per spcn , 900 mm equilateral triangle as per spcn , 600 mm circle as per spcn , retro reflective sign board as per spcn , retro reflective sign board as per spcn , retro reflective sign board as per spcn , retro reflective sign board as per spcn , delineator as per spcn , road stud as per spcn , solar fog edge indicator as per spcn , solar delineator as per spcn , solar road stud as per spcn

corporations/Associations/Others

CTN :40606171

14 Jun, 2025 NA

Donimalai - Karnataka

Tender For supply of mrl boards , reflective sign boards

State Government

CTN :40205620

10 Jun, 2025 76.0 Thousand

Lucknow - Uttar Pradesh

Tender For corrigendum : name of work : providing and fixing of retro reflective sign board at 132 kv sub-station nkn & 220 kv sub-station bkt under e.t.d.-ii, lucknow.

CTN :40541729

19 Jun, 2025 NA

Jamnagar - Gujarat

Tender For supply of furniture for laboratory - raw water (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , compressed air (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , nitrogen (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , ceiling panel , ceiling front cover panel for 5 feet aeolus fumehood , ceiling lh/ rh side cover panel for aeolus fumehood , understorage , fixed type apparatus storage cabinet for bench top enhanced fume hood (750 width) , rear support panel offixed type apparatus storage cabinet for benchtop aeolus fumehood , supply and installation of laboratory exhaust including supporting structures/hardwares including delivery, unloading the consignment and transporting it from the place of storage to the installation site, removal of debris, dirt and rubbish accumulated as a result of installation/commissioning of the same for analytical lab as per direction of engineer in charge : - , centrifugal blower & accessories , centrifugal fan with housing in pp construction & suitable stand in ms zinc plating with powder coating. inlet/outlet dia: 350mm. impeller dia: 400mm. non flp motor: 2 hp 1400 rpm. minimum cfm: 1000 @ 50 wcmm static pressure. motor make : ie2 (non flp), crompton greaves/bharat bijlee or equivalent. db level: 75. motor description: ip55, 3 phase, 440 volt , 50 hz. weather cover for motor. anti-vibration pads & m10x100 pin type anchor fasteners , blower weather cowl (frp outlet) & ms stack support with required clamps , 10 (250mm) 100% injection molded pp damper with two side flange , pp/frp ducting & accessories for fume hood & spot extractor exhaust , design, supply & installation of pp-frp ducting of wall thickness 3mm ppgl + 3mm frp for sizes up to 500mm dia, above 501mm dia 4mm ppgl + 4 mm frp shall be used unless otherwise specified. including clamps, hanging support, all hardwares required to complete ducting work. , ducting upto 500mm dia - wall thickness shall be 3 mm for pp and frp.

CTN :40427134

11 Jun, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of furniture -the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 50cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. it shall have center tilt synchro mechanism, 360 degree revolvingtype, 3 position locking system with anti-shock feature. the headrest is injection moulded in glass filled polypropylenewhich is upholstered with foam and fabric. the pneumatic height adjustment is chrome plated with an adjustmentstroke of 9cm. the pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors.the pedestal is 65cm pcd. the overall dimension of the chair shall be 75cm x 75cm x (115-130cm). seat height shall be44.5cm to 53.5cm.this shall come with sliding seat, which helps user adjusting the seat depth as per the user size andneeds. the product shall be certified with the following: cii greenpro, ul greenguard, scs indoor advantagegold, bifma level 2. the work shall be done strictly as per drawing and direction of engineer-in-charge , the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 550cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. the chrome plated tubular frame is made of dia. 2.8cm x 0.2cmthick ms round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. theoverall dimensions of the frame shall be 63.5cm x 59.5cm x 97.5cm. the seat height shall be 42.5cm. the product shallbe certified with the following: cii greenpro, ul greenguard, scs indoor advantage gold, bifma level 2. thefurniture quotation for ae & je civil - hindan airforcefor assistant engineer room:2work shall be done strictly as per drawing and direction of engineer-in-charge. , providing and placing in positionmain table with side table. overall size shall be 2350mm(l) x 1200mm(d) x 750mm(h) with sidetable of size 1250mm(l) x 500mm(d) x 750mm(h). the main table and side table tops are made of 25mm thick mdf with bottomside pre-laminate board confirming to is-14587:1998 and 0.4mm pvc membrane pressed on to top. soft closing access flap withinbuild power box are provided on work surface for wire management. the modesty panel is made of 25mm thick mdf - one side prelaminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top. the understructure is made of 25mmthick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2mmthick pvc lipping. the drawer unit is made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirmingto is-12823:1990, edge banded with matching 2mm thick pvc lipping. drawer units - drawer fronts made of 25mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pv