Latest refractory concrete Tenders | Government refractory concrete Tenders

corporations/Associations/Others

CTN :43480599

14 Jan, 2026 3.02 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym and pcc benches in parks near house no.2870/2 sector 49-d,chandigarh under mplads. work no.114 18th ls. - push chair odf 001functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mm material: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting lifeprovision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, surf board by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, streel footrest/foot paddle for long lasting life.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, space walker .space walker complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is not more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is not less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no less than 3.0 mm.13 the diameter of rotating shaft is not less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. approaches: hold the crossbeam with both hands and swing your legs backwards and forwards in a walking motion.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, seated pedal trainer leg shaper complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730

corporations/Associations/Others

CTN :43461971

13 Jan, 2026 3.03 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in garden of annual part i of sector 44 chandigarh under wdf - providing & fixing of push chair functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting life. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing & fixing of sur board functions: by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel footrest / foot paddle for long lasting life.the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing and fixing of space walker .space walker complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is no.t more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no. less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is no.t less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no. less than 3.0 mm.13 the diameter of rotating shaft is no.t less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge, providing and fixing of seated pedal trainer leg shaper complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high en

CTN :43475418

15 Jan, 2026 4.50 Lacs

Bundi - Rajasthan

Tender For supply and fixing work of open gym item in ward no 2 lakheri - part " a " :- building work ;, air swing: providing, designing and fixing of air swing in pair of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 3mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately)., horse rider station: providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. base plate cover and seat to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movement. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate cover and fixing of equipments etc (the cement concrete and excavation work shall be paid separately)., stair stepper: providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000 x 800 x 1400 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and uv re

corporations/Associations/Others

CTN :43487189

17 Jan, 2026 NA

Hyderabad-T - Telangana

Tender For supply of fabrication and erection of isa, ismc, ismb or any other cross section of ms e250 grade a of is 2062-2011 , fabrication and erection of stainless steel sections including cutting, welding by gtaw process, drilling, handling, shifting of material as per working documentation and site requirement , erection of stands or local control panel or consoles or fabricated supports either by welding to eps or by anchoring wall or floor concrete or bolting to supports , manual welding on carbon steel and stainless steel equipment and components using gtaw process. , manual welding on carbon steel and stainless steel equipment and components using smaw process. this include similar and dissimilar welding of fillet joint configuration of various weld size. , erection and dismantling of scaffolding-erection of scaffolding using standard ms pipes cross support , core cutting of holes upto dia 200 mm of various depths in reinforced concrete walls or slabs , core cutting of holes above dia 200 mm of various depths in reinforced concrete walls or slabs , drilling of holes upto dia 200 mm of various depths in concrete block walls or brick , drilling of holes above dia 200 mm of various depths in concrete block walls or brick , items of dia upto 40 mm , items of dia above 40 mm upto 60 mm , field survey transferring and marking the grid location in x,y and z axis using total station in main plant building as and when required.

Central Government/Public Sector

CTN :43485115

28 Jan, 2026 13.43 Lacs

Jaduguda - Jharkhand

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - ndt, civil, mechanical, radiological; carbonation test, cover meter test, crack width measurement in reinforcement concrete structures, half cell potential difference..

CTN :43465260

21 Jan, 2026 39.93 Lacs

Banaskantha - Gujarat

Tender For supply of impulse generator , electrolytic tank , high voltage ac/dc test set , rod gap arrangement , horn gap apparatus , van de graff generator , corona cage arrangement , capacitance tan delta set , three phase transformer , synchronous motor coupled with dc shunt generator , automatic metallographic sample mounting press machine , metallographic sample precision cutting machine , swelling pressure apparatus , table vibrator 1m x 1m (concrete lab) , rebar locator , standard penetration test equipment , marshal test apparatus , absolute and kinematic viscosity test apparatus , specific gravity of aggregate

CTN :43462993

13 Jan, 2026 NA

Villupuram - Tamil Nadu

Tender For purchase of refractory concrete

State Government

CTN :43444020

13 Jan, 2026 50.00 Lacs

Dungarpur - Rajasthan

Tender For निर्माण सामग्री व निर्माण में काम आने वाले उपकरण की आपूर्ति का कार्य ग्राम पंचायत उड़ादिया - work of supply of construction material and equipment used in construction gram panchayat udaiya --, gravel, , stone masonry, stonework, , bricks class i, class ii (size 22.5x11x7.50 cm), , sand/gravel, , ballast (crusher and hand broken), , cement, , strips, , winding wire, iron girders, conical iron, barbed iron wire, factory iron doors, etc., , 1, , bars, , kota stone, marble, rajnagar flooring etc., , glazed, vitrified tiles, interlocking tiles, , iyum pipe may kolar, , pvc water tank (isi mark) with cover, , water tanker (4000 liters), , enamal paint, distemper, chuna etc., , cement, concrete mixer machine vibrator, , diesel road roller, , , shuttering, iron plate with beam and other materials, , tin shed, , display board, , wall painting etc

State Government

CTN :43444022

13 Jan, 2026 50.00 Lacs

Dungarpur - Rajasthan

Tender For निर्माण सामग्री व निर्माण में काम आने वाले उपकरण की आपूर्ति का कार्य ग्राम पंचायत पंच कुण्डी लिखतिया - work of supply of construction material and equipment used in construction gram panchayat panch kundi likhtiya --, gravel, , stone masonry, stonework, , bricks class i, class ii (size 22.5x11x7.50 cm), , sand/gravel, , ballast (crusher and hand broken), , cement, , strips, , winding wire, iron girders, conical iron, barbed iron wire, factory iron doors, etc., , 1, , bars, , kota stone, marble, rajnagar flooring etc., , glazed, vitrified tiles, interlocking tiles, , iyum pipe may kolar, , pvc water tank (isi mark) with cover, , water tanker (4000 liters), , enamal paint, distemper, chuna etc., , cement, concrete mixer machine vibrator, , diesel road roller, , , shuttering, iron plate with beam and other materials, , tin shed, , display board, , wall painting etc

CTN :43400179

16 Jan, 2026 NA

Valsad - Gujarat

Tender For supply of civil engineering common lab equipment -lab vane shear , plate bearing test apparatus , rapid cholride permeabilty tester , concrete permeability tester , blaine air permeabilty apparatus , benkelman beam appratatus , pavment core drilling machine

Refractory Concrete Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government