Latest refrigerant pipeline Tenders | Government refrigerant pipeline Tenders

Corporations And Associations And Others

CTN :40945249

09 Jul, 2025 NA

Delhi - Delhi

Tender For supply of materials for day to day maintenance work in area by providing precast rcc slabs and precast rcc chair bench at sarita vihar store in ward no. 187/ central zone. - laying and jointing pvc pipe. heading, supply of rcc slab grating 70mm thick manufactured with cc 1:2:4 reinforced with 96kg/cum of rcc i/c tapping all four side with ms sheet 1.6 mm thick & fixing in position complete. (drain cover with or without holes) at mpl store., providing and fixing of precast rcc chair bench with arm rest each bench consists of 2 no, l-shaped base support in grey cement colour (thickness 80mm x 90mm, 890mm back height; 450mm front height with base width 690mm) and 1 no. reinforced concrete plank in red colour of size 1500mm x 425mm x50mm and 1 no. of reinforced concrete plank in red colour size 1500x425mm x50mm total height of the bench 890mm manufactured using cement concrete 1:1.5:3 (cement : 1.5 coarse sand: 3 stone aggregate 12.5 mm nominal size) using vibro compaction process reinforced suitably to promote long use and to prevent damage during handling. transportation & erection, all parts are joined together with galvanised nuts and bolts of suitable size and all bolts are sealed after assembly, bench top and back planks are treated with special anticorrosive water proof coating so as to make surface glossy and water proof and as per direction of engineer-in-charge.

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

CTN :40940965

09 Jul, 2025 2.15 Lacs

Aurangabad-Mh - Maharashtra

Tender For repair of various items at ambikanagar library ward 82 - removing the existing cernent plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc.complete.note: following items to be executed after prior approval of superintending engineer., providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete., providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on bothsides, and finishing with french polish etc. complete., providing and fixing in position. (as per 1.5 * 0.1868 / 1982 ) aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38.1 * 1.02 mm at weight 0.547 kg/rmt. and window frame bottom track section 61.85 * 31.75 * 1.2r at weight 0.695 kg/rmt. top and side track section 51.85 * 31.75 * 1.3 mm at weight 0.659 kg/rmt. the shutter should be of bearing bottom 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 * 18 * 1.1 mm at weight 0.469 kg/rmt. and handle section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. and top section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. as per detailed drawings and as directed by engineer in charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour anodising with box., providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete., dismantling the r.c.c. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., providing and laying cast in situ/ready mix cement concrete m-20 of trap/granite/quartzite/gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand, providing and fixing in position tmt - fe-500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete., providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand face

State Government

CTN :40928995

08 Jul, 2025 NA

Pune - Maharashtra

Tender For supplying electrical materials and repair maintenance services for divabatti at awasari bk tal ambegaon dist pune - supplying and erecting modulartype switch6a/10a, supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length, providing cement concrete foundation including excavationfor the poles 60cm * 60cm * 1.5m deep in 1:3:6 cement concrete ( 20 * 25 mm stone metal) and 45cm * 45cm * 45cm / 45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner. (for 8.5 to 9 m poles) (16-3-2), supplying and erecting steel tubular swaged pole 139.7 * 114.3x 88.9 mm. dia with 4.5 * 3.65 * 3.25 mm thickness ( 4.5 + 1.75 +| 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation. (weight 101 kg.) as per specification no.oh-pl/stp, supplying and erecting street light bracket made from 25mm. dia bclass g.i. pipe, 0.6m. in, supplying and erecting led street light fitting suitable for 36w to 40w led street light, including lamp, with pf > 0.95 class ip 65., supplying and erecting led street light fitting suitable for 50w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65., supplying and erecting led street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95, class ip 65, supplying and erecting led flood light fitting of 150w, including lamp, with pf > 0.95, class ip 65, providing rental basis hydraulic bucket vehicle of hight 13 mtr. and weight capacity 200 kg. with driver, oprator and disel etc. for per day basis, labour chrages for led fitting on street light or ms light pole., dismentaling charges -led street light of pole., 1.25 mm crca sheet metal enclosures box for timmer and mcb, supplying pvc insulated pvc round sheathed 1.5 sq.mm, supplying & laying armoured cable 4c x 6 sq.mm., supplying & laying armoured cable 4c x10 sq mm, supplying & laying armoured cable 2c x 10 sq mm, supplying & laying armoured cable 4c x 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting) 5-3-3, supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting) 5-3-7, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching "on" & switching "off" street light as per daily sunset and sunrise respectively, supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete, supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm complete..., supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials. 4-4-3, supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunking/inside pole., supplying and erecting mains with isi mark wp2 x 6 sq. mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire no. 8 swg 1-4-3, supplying and erecting mains with isi mark wp2 x 2.5 sq mm.1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, supplying and erecting mains with isi mark wp2 x 10.00 sq mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire, 25 amp, 32 amp three phase l/t contactor, 2.5 sq. mm multistand copper wire, insulation tape, water proof tape, street light pole box frp, cement street light pole clamp, m.s. street light pole clamp, led street light arm bend pipe, small size frp box for mcb, big size frp box for mcb, supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (dwc) of hdpe for enclosing cable below grou

State Government

CTN :40878491

05 Jul, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For corrigendum : material purchasign for construction of one room zp psb and providing basic amanities at village kanhori tq phulambri dist chhatrapati sambhajinagar - laying and jointing pvc pipe. heading, providing and laying cast in situ/ready mix cement concrete m-20 of trap /granite/quartzite/ gneiss metal for r.c.c.beams and lintels as per detailed designs anddrawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel) with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.complete, providing and fixing in position tmt-reinforcement of various diameters for t-fe-500 bar r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm lo 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to is 15622-2006 (group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1.4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

Central Government/Public Sector

CTN :40644298

02 Jul, 2025 NA

Nagpur - Maharashtra

Tender For corrigendum : supply of providing water proofing treatment to old terraces , providing and applying water proofing treatment , crack groove cutting , crack sealing filling using epoxy mortar , providing and fixing of 12 mm nozzle in the crack portion , providing grounting of nozzles with low viscosity epoxygr out including material, labour complete in all respect. , providing antitermite treatment to the sides of flooring , removing cement tiles, or marble or polished shahabad floor or dado without bed concrete , providing and laying in position flooring of telephone black amba white cat bary brown ruby red ocean brown granite stone of approved shade and size , providing and laying vitrified mirror glossy finish tiles , providing and laying vitrified rustic matt finish tiles , providing and laying ceramic tiles , providing and fixing 30mm thick both side prelaminated solid panel pvc door shutter , providing and fixing on walls ceiling floor 32 mm dia cpvc pipe , providing and fixing on walls ceiling floor 25 mm dia cpvc pipe , providing and fixing on walls ceiling floor 20 mm dia cpvc pipe , providing and fixing on walls ceiling floor 15 mm dia cpvc pipe , providing and fixing white european type wall hung pan , providing and fixing table top white wash basin , providing and fixing 1st class white glazed earthenware orissa type w.c. , providing and fixing 8cm c.i. nahani trap including c.i. grating bend and piece of c.i. pipe upto the outside face of the wall complete. , providing and fixing 15cm x 10cm salt glazed stoneware gully trap , providing, laying and fixing, jointing supreme eco- drain 160 mm , providing and fixing 450mm x 550mm size superior type belgium mirror , providing and constructing brick masonry inspection chamber 90cm x 45cm x 90cm , providing and laying for 150 mm dia salt glazed stoneware pipe , providing and fixing divertor with overhead shower, showerarm, spout, hand shower , providing and laying minaral fibre board 600 x 600 mm etc complete , providing and applying two coats of wall care putty , providing and applying plastic emulsion paint , providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces , providing and applying two coats of synthetic enamel paint , disposal of building rubbish malba similar unserviceable dismantled or waste materials

CTN :40840450

07 Jul, 2025 83.0 Thousand

Pulwama - Jammu And Kashmir

Tender For constt at masjid sharief ganie mohalla at samboora b - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soil : 25m from cutting edge, disposal of earth with in 100 m lead from site of work complete job, dry random rubble masonary with hard stones in foundations and plinth with out bond stones .including carriage of stones for 5kms by mt, dumping stone on horizantal level including cost of stones and 5km carriage by mt, providing and laying of stone soling incl carriage for 5 kms by mt complete job, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size), p/l of rcc slab in 1:2:4 mix with 20 mm nominal size aggregates excl. cost of shuttering and reinforcement. slab dia (9.0)2, reinforcement for rcc works incl cutting bending, straightning, etc complete of approved brand and quality., 12mm cement plaster finished with a floating coat of neat cement of mix in 1 : 4, centering and shuttering incl strutting, propping, and removal of farmwork.soakage pit dia (5.0)2, carriage of sand for 10 km, carriage of agg for 10 km, add cost for pvc pipe fittings comp job incl. bends ,tees, junctions, add for providing / fixing of top lid of inspection chamber comp job., add cost of photograph and sign board etc.and other unforseen items to be paid as per actual

CTN :40855452

17 Jul, 2025 NA

Belgaum - Karnataka

Tender For construction of basketball court - site preparation include cleaning, excavation leveling, soil base, watering etc, including cost of all materials and labour complete as per specifications , providing and laying boulder filling placing, ramming, watering etc. including cost of all materials and labour complete as specifications , providing and laying in position pcc concrete base of grade m20 and size 38 mtr x 28 mtr and 4 inch thickness. including cost of all materials and labour complete as per specifications , providing and applying in position allweather proof acrylic synthetic eight layers flooring system. filler course, cushion course, texture color coat, finish color coat, gale line marking , supply and installation pof moveable basketball pole as per standard made of heavy duty 6 inch round ms pipe with 2 point 2 meter extension with 20mm transparent acrylic board with dunking ring , providing and fixing basketball court lighting with 6 poles with 7000 watts , providing and fixing iron fencing around the basketball ground around 420 sq mtr , providing and fixing entry and exit door of basketball court , providing basketball , providing basketball net , providing and laying water drainage system , providing led score board weather proof of size length 3 feet and height 4 feet scoring control interface inbuilt counter switch , providing and laying in position in position cement pavers around the court area including cost of all materials labour hom of machinery work

Central Government/Public Sector

CTN :40837596

08 Jul, 2025 14.76 Lacs

Nashik - Maharashtra

Tender For procurement of hvac items components and accessories at acem under emu r and d nasik - d scaling for chemical, chemical, top up the gas in the refrigent working/non-functional units after pressure testing, vacuum testing, and leak testing up to required pressure and flow rate to maintain temperature etc. complete of split window/ vrf/ compressor unit of various ratings., providing & supply following field devices as per directions of engineer-in-charge., valve actuator. 50mm, level switch, float valve, thermostat, temperature sensor, pressure gauge, temperature gauge, expansion valve, volt meter, ammeter, selector switch, air dryer, indicator, compressor oil, providing laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required., 80mm, 65mm, 50mm, 40mm, providing & supply following refrigerant copper tube & nitrile insulation as per directions of engineer-in-charge., 1 copper tubes, copper tubes, copper tubes, 3/8 inch copper tubes, providing & supply globe valves as per directions of engineer-in-charge., 125 mm (5"), providing & supply check valves as per directions of engineer-in-charge., 75 mm (3 "), providing, fixing and supply following size y strainers as per directions of engineer-in-charge., 50 mm (2"), 65 mm (2. 1 2 "), providing, fixing and supply following size pot strainers as per directions of engineer-in-charge., 100 mm, providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :, 25 mm (1"), providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :, 15 mm, 20 mm, 25 mm, providing and fixing gun metal non- return valve of approved quality (screwed end) as per directions of engineer-in-charge., 65 mm, providing, fixing and supply following electrical accessories as per directions of engineer-in-charge., mccb 100a / 415v / 50hz make and model as per existing system required., mccb 200a / 415v / 50hz make and model as per existing system required., sfu 63a / 415v /50hz fn 63 as per suitable in existing panel, sfu 32a / 415v /50hz fn 32 as per suitable in existing panel, motor protection relay range 0 - 20a/240v/50hz make minilec for existing panel, plc card, three phase monitoring relay, mod motor ll sensor, vfd 3.7 kw motor

corporations/Associations/Others

CTN :40794266

10 Jul, 2025 12.63 Lacs

Kanpur - Uttar Pradesh

Tender For tender for supply of fire alarm cable for single control c c - sitc of active repeater with full function control compatible for already installed gst 200 series detail specification as per annexure a , sitc of network card compatible for already installed gst 200 series panel detail specification as per annexure a , supply & laying of 2 into 1 point 5 sqmm copper fire alarm armoured cable detail specification as per annexure a , supply and fixing of commercial card for programming for already installed gst series detail specification as per annexure a , supply and installation fire alarm software programming for already installed gstseries detail specification as per annexure a , cutting road and making good the same strength as per existing detail specification as per annexure a in cement concrete road , cutting road and making good the same strength as per existing detail specification as per annexure a in bituminous road , construction of masonry chamber 90 into 90 into 100 cm depth detail specification as per annexure a , excavating trenches of required width for pipe and cable detail specification as per annexure a , supply & laying of hdpe pipe 50 mm dia detail specification as per annexure a

Refrigerant Pipeline Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others