Latest refrigerated microcentrifuge Tenders | Government refrigerated microcentrifuge Tenders

State Government

CTN :45228137

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of centrifugal machine spares

CTN :45219186

03 Jun, 2026 NA

Tiruvannamalai - Tamil Nadu

Tender For pure nickle screen for nhec nk-1100 continus centrifugal machine

CTN :45203141

21 May, 2026 NA

Thanjavur - Tamil Nadu

Tender For purchse of continuous centrifugal machine spares nhec make

CTN :45203145

21 May, 2026 NA

Thanjavur - Tamil Nadu

Tender For purchase of wil make a range centrifugal machine spares

CTN :45057581

22 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45175471

28 May, 2026 NA

Billimora - Gujarat

Tender For supply of bi facial solar panel 550 watt , topcon solar panel 610 watt , cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter , cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump , cut section of shell and tube heat exchanger acrylic material , cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve , gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410 , wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity , safety belt, industrial type full body protection double rope double hook,100 kg human weight , embroidery machine , brake test arrangement with two spring balance 0 to 25 kg rating , automatic motor coil winding machine with step arbor , three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz , synchronous motor, with accessories , vfd ac drive ac motor drive with vvvf control 3 phase , single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz , stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c , bldc motor fan with controller 40 watt , servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp , electrical test bench integrated with 0 to270v ac variac 25a ) /bid number : gem/2026/b/7525454 * /dated: 13-05-2026 & & / bid document 1 / 20

CTN :45105963

21 May, 2026 NA

Bazpur - Uttarakhand

Tender For supply of general electric goods in sugar mill - supply of switch gear/fuses, bch, techinc, schneider havells make, supply of switch gears, bch, techinc, schneider havells make, supply of copper & aluminum lugs/tools and dies, dowells make, supply of switch gear/fuses, schneider havells hpl make, supply of gears/change overs/mcb s etc, schneider havells hpl make, supply of copper/aluminum cable, havells, polycab,rr. grandley, national, gold medal make, supply of pvc insulated copper/aluminum wires, havells, polycab,rr. grandley, national, gold medal make, supply of lamps/flourescent tubs/cfl/luminaries/fitting blasts etc, surya , heavells philips, r.r., gold medal, supply of ac/dc/meters; ct s etc, ae make, supply of ocb s/resistance box spares, ae make, (a) insulating items- insulating varnish elmoluth.-1, isi/iso standard , beck tol red 1 kg. pack, isi/iso standard, thinner for beck tol red, 1 litre tin, isi/iso standard, p.v.c. tape x 10 meters steel grip in red, yellow, blue&black colour,isi/iso standard, empire tape 1 x 50 meters, isi/iso standard, glass tape 1 x 50 meters, isi/iso standard, cotton " " " , isi/iso standard, film insulation sheet 10 mm, isi/iso standard, lethoride sheet 10 mm, isi/iso standard, glass sleeve 1.5 mm. (1 mtr. long) isi/iso standard, glass sleeve 3.0 mm. isi/iso standard, glass sleeve 5.0 mm., isi/iso standard, do 8mm. isi/iso standard, do 10mm. isi/iso standard, do 12mm. isi/iso standard, hylam tube dia 3/8 thickness 2 mm., 1 mtr. long, isi/iso standard, hylam tube dia - do - isi/iso standard, crimple paper isi/iso standard, backelite sheet 20 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 25 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 1.5 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 3 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 13 mm. x 1 mtr. x 1 mtr. isi/iso standard, fibre backelite rod 2 x 1 feet. isi/iso standard, (b)terminal plates & fans for motors -terminal plates for 40 h.p. motor. isi/iso standard, do 125 h.p. motor. isi/iso standard, do 75 h.p. isi/iso standard, do 60 h.p. isi/iso standard, do 15 h.p. isi/iso standard, do 05 h.p. isi/iso standard, do for four speed ng 700 centrifugal machine. isi/iso standard, (c) aluminum fan for 75 h.p. vertical motor. isi/iso standard , do 60 h.p. isi/iso standard, do 25 h.p. isi/iso standard, do 15 h.p. isi/iso standard, do 05 h.p. isi/iso standard, (d) plastic fan plastic fan for k.h.-160, 25 h.p. isi/iso standard , do 10 h.p. isi/iso standard, do 5 h.p. isi/iso standard, (e) lighting accessories side holder for tube light, isi/iso standard , tube light strator, isi/iso standard, halogen holder, isi/iso standard, s.c. holder for 100 watt bulb isi/iso standard, -do- 300 watt isi/iso standard, s.c. holder for m.v. fitting 400 watts, isi/iso standard, hand lamp complete, isi/iso standard, pendent holder, isi/iso standard, tumbler switch 15 amp. surface type, isi/iso standard, -do- 5 amp. isi/iso standard, socket 3 pin - do - isi/iso standard, -do- 5 amp. isi/iso standard, wooden board 10 x 12 . isi/iso standard, m.c.b. box 2 ways/4 way. isi/iso standard, 10ways/12ways isi/iso standard, glass fuse 6 amps. isi/iso standard, glass fuse 8 amps. isi/iso standard, glass fuse 10 amps. isi/iso standard, (f)1- excitation coil for 40 h.p. isi/iso standard, 50 h.p, isi/iso standard, electronic controller for 50 h.p.dynodrive motor, isi/iso standard, assembly with t.g. coil dynodrive 50 h.p, isi/iso standard, mannual controler for 50 h.p, isi/iso standard, solonoid coil k-593-712 240 volt. for ng-700 c/f machine, isi/iso standard, do but for 1. ton. c/f machine, isi/iso standard, base mounting type synchronous timer e.m.1000 isi/iso standard, -do- 3 - 60 sec. isi/iso standard, -do- 0.15 - 3 min. isi/iso standard, (one instantaneous + 2 delay contacts) isi/iso standard, flush mounting type synchronous time e.m.1000, isi/iso standard, do 3 60 sec. isi/iso standard, do 0.15 3 minutes. isi/iso standard, (one instantaneous + 2 delay contacts) isi/iso standar

Co-operative

CTN :45073104

18 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of the electric miscellenious material - empire tape 1", p.v.c. tape " steel grip make, glass tape size 1", cotton tape 1", black insulation tape 1" johnson & johnson make, fiber glass sleeve 1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 10 mm, 18 mm, film paper 7 mile/ 10 mile, nomax paper 7 mile/ 10 mile, plastic coated leatherized paper 7 mile/ 10 mile, fiber glass pipe " x 4 to 1" x 4, condensor 2.5 mfd, 3.15 mfd, 4.0 mfd, 6.0 mfd, 8.0 mfd, 10.0 mfd, 30.0 mfd, 36.0 mfd, 100.00 mfd, 120.00 mfd, exhaust fan three phase 415 volt, 50 hz isi mark, size-18", size-24", exhaust fan blade size-15", size-18", size-24", auxilary contact block 3ta61,220 volt, 4no+4nc, auxilary contact block 3ta24/28, heater rod 1000 watt 12" long, 1500 watt 12" long, petrolium jally 50gm pack, alluminium/copper crimpling lugs (dowells make/ svs make), lug punching machine upto 400 sqmm crimpling dia r4 to r14, crimpling die r-4 to r-14, phase tester taparia make, c.r.c 226, hot air blower, benzene, insulating plier 8" taparia make, thinner dr.beak l1 twenty litre pack, air dry varnish dr.beak make elmo luft 1a - 21 litre pack, becktol red/grey dr.beak - 4 kg tin, motor connection plate for bbl/ke/siemense/crompton make motor 7.5 hp, 10 hp, 15 hp, 25 hp, 40 hp, screw driver set taparia make, proximettry switch ps 18 dbpo 5-30 vdc, h.b.c./hrc fuse link 250amp. tkf 250, 660 vac, 80 kag g.e.power controls, isi mark, volt meter 144 x 144mm, 0-600v, ae make, square type volt meter, 96 x 96, 0-600v, pedistal type amp meter 0-200 ctr 200/5, 0-300 ctr 300/5, 0-400 ctr 400/5, 0-600 ctr 600/5, flash mounting digital frequency meter 94 x 94mm, 45-55hz, 144x144mm, 45-55hz, soldering rod, soldering iron, soldering flux eyre no.7, soldering wire 60% + 40%, megger upto 1000 volt (hand operated), megger upto 1000 volt (mechanical operated), bakelite sheet 1/16" x 2 x 4 to 3/8" x 2 x 4, bakelite rod 2", potentio-meter pankaj make 500 ohm 3 watt, 5k ohm 1 watt, 600 ohm 3 watt, 10k ohm 1 watt, diode 15k kitron forward, diode 15k kitron reverse, power diodes for t.g.set 321 umr 100 reverse, power diodes for t.g.set 321 umr 100 forward, diode 12 hr 40/u.s.r. 120-40 usha 40 amp. normal polarity, reverse polarity, brass holder for fibrizer 400 hp slipring motor, brass holder for cane unloader carbon brush size- 40 x 40 x 20, brass holder for cane unloader carbon brush size- 25 x 25 x 100, carbon holder spring for above holder size- 40 x 40 x 20, carbon holder spring for above holder size- 25 x 25 x 100, copper carbon brush m-15 e quality(a) with pig tail 8 x 18 x 30, 10 x 30 x 40, 16 x 32 x 42, fibrizer motor 22 x 32 x 45, cane cutter motor 20 x 40 x 50, 25 x 25 x 40, 25 x 25 x 50, 1500 kw alternator 25 x 40 x 55, (b) without pig tail (cane unloader) 25 x 40 x 40, 20 x 20 x 96/100, 25 x 25 x 100, ( c ) graphited carbon brush with double pig tail for centrifugal machine 12x32x45, 10x30x40, copper carbon brush m-15 e quality with double pig tail 25 x 32 x 50, 25 x 40 x 50, 32.5 x 32.5 x 12.5 (eg-224), copper carbon brush m-15 e quality for 1500 kw alternator rotor size 25 x 40 x 55, carbon holder for 15kw exciter jyoti make, tension spring for above, d.c.volt meter 65x65, 0-100 amp. panel mounting, push button element vaisno make 1no+1nc, rectifier 200amp + base (usha), semi conductor fuse gsg 1000/350, 600 volt ac, 350amp (bussmann make), fuse kit kat 20 amp. ee make, fuse kit kat 32 amp. sm-32 ee make, fuse kit kat 63 amp. sm-63 ee make, c.t.operated flash mounting amp meter 96x96mm 0-200amp ctr 200/5, 0-300amp ctr 300/5, 0-400amp ctr 400/5, 0-500amp ctr 500/5, 0-600amp ctr 600/5, 0-800amp ctr 800/5, 0-3000amp ctr 3000/5, but volt meter 0-600 v, current transformer ae 50/5,100/5,200/5,400/5,600/5, plastic cooling fan for ke/bbl/ngef make motor 3hp, 5hp, 7.5hp, 10hp, 15hp, 20hp, 25hp, 30 hp, 40hp, 50hp, flush type synchronius timer 2 delay 5-120sec. em 1000 gec, crane duty motor sq cage duty s-4 (crompton/gec/bbl/siemense make) all size/type, squarrel cage induction motor (c

CTN :45151959

22 May, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of bare shaft for a range centrifugal machine

CTN :45138827

28 May, 2026 NA

Barmer - Rajasthan

Tender For supply of s and f of ring main system for wss - supplying laying jointing commissioning and testing 100mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supplying laying jointing commissioning and testing 150mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supply and fix valve reflux with by pass arrangement 100mm 4 inches dia , supply and fix foot valve confirming to is 4038 100mm 4 inches dia , supply and fix valve sluice flanged of class 1 point 6pn 100mm 4 inches dia , supply and fix valves sluice flanged of class 1 point 6 pn 150mm 6 inches dia , supplying installing testing and comissioning of centrifugal pump electric driven capacity not less than 25 lps discharge at 60 metre head in load as per atc , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable hd 1100v grade stranded aluminium conductor size 70 sqmm 3 point 5 core , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable heavyduty 1100v grade stranded aluminium conductor size 10 sqmm 4 core , supplying installing testing and commissioning of outdoor type factory made crca sheet thickness 3 point 15mm platform mounted lt panel board to accommodate as per atc , supplying installing testing and commissioning of indoor type factory made crca sheet thickness 2mm platform mounted lt panel board to accommodate as per atc , supply install test commission centrifugal openwell submersible pump cap 10hp singlephase discharge range 740 to 200lpm head range 35 to 54m suction x discharge pipe dia 65x50mm as per atc , supply and fix cast iron air valves with two air outlets 80mm dia bore and fixing up in ) /bid number : gem/2026/b/7514655 * /dated: 08-05-2026 & & / bid document 1 / 21 & & ' ' /item category cast iron water supply mains , excavation in tranches not exc 1 point 5m wide n exc 1 point 5m depth over exc 10sqm on plan and n exc 1 point 5m in depth for foundations shafts wells cesspite mainholes pier holes as per atc , returning filling in including spreading laveling watering and well ramming in layers n exc 25cm in soft or loose soil complete all as specified and directed by engr in charge , removal of excavated soil material to a distance not exc 50m or depositing where directed at a level not exc 1 point 50 metre above th staring point complete all as specified as per atc , boring of hole under road pavement hardstanding by trenchless technology using ultra sounding technique nec machine incl hdpe pipe 150mm dia suitable for 0 point 4mpa working pressure , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 150mm for taping complete all as specified and directed note tee 150 x 150 x 150mm paid separetly in di special , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 100mm for taping complete all as specified and directed note tee 150 x 150 x 100mm paid separetly in di special , di or ci special such as tee bend collar tail piece and other fitting as required , earthing of poles and other machinery or equipment using 4mm gi wire as earthing lead and ms galvanized plate of size 60cm x 60cm x 6mm as earth electrode , demolition and diasmanttling of concrete in ground floor and pavings n exc 15cm thickness , m and l of cement concrete b 2 1 colon 2 colon 4 40mm graded aggregate 100mm thickness , m and l for contruction of brick masonry valve pit in repair of inter size 90x90x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc , m and l for contruction of brick masonry valve pit in repair of inter size 120x120x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc

Refrigerated Microcentrifuge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Co-operative