Get complete information related to latest Registration Plate Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Registration Plate Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Registration Plate Tenders.
Tender For supply of crematorium shed and view cutter fence - pre-painted galvanized iron sheet of size 10ft x 3 ft and thickness 0.4 mm , corrugated galvanized iron sheet of size 8 ft x 3 ft and thickness 20 gauge , ms angle 40mm x 40mm x 4mm , ms square pipe 100mm x 100mm x 4mm , ms square pipe 50mm x 50mm x 4mm , ms square pipe 40mm x 40mm x 4mm , base plate 6 inch x 6 inch x 4mm , welding rod 3.15mm , ms iron cutting blade 14 inch dia , ms iron cutting blade 4 inch dia , self tapping screw 1 inch , self tapping screw 2 inch , drill adaptor 8mm pack of 5 pcs , red oxide , paint as per buyer requirement , tarpin oil , paint brush 4 inch , paint brush 3 inch , cement 50 kgs , fine river sand , graded stone or boulder aggregate of gauge not exceeding 25mm , hardcore of broken stone or boulder of gauge not exceeding 63mm including spreading and leveling as directed by site incharge , earth soil including spreading and leveling as directed by site incharge
Tender For supply of spare parts for im ii and iii - labour for cleaning the work site before and after work etc., handle axle (stainless steel), chain with coupling, handle assemblyb (g.i), upper valve guide (g.m), nitrial rubber sealing big for lower valve mark -ii, third plate for head assembly (galanized), nitrile sealing ring mark - ll, ball bearing 6204 z, nitrile rubber cup washer for mark - ll & lll, connecting rod 3mtr long with coupling and and nut (electro galvanized), (a) cylinder assembly complete set for mark-ii, (a) lower valve assembly complete set for indian mark-ii, pump head assembly (g.i) with front covr, bolt & third plte, (a) water tank assembly for mark-ii (g.i), (a) upper valve assembly complete set for indian mark-ii, cylinder body with brass liner for m-ii with reducer cap for top and bottom, nipple 1 1/4"x6" (32mm dia), nipple 1 1/2"x6" (40mm), reducer socket 1 1/2"x1 1/4" (40mmx32mm), 25mm dia. plugs, 25mm dia. socket, 50 mm adopter for ppr-gi connection dia male/female adopter (m.t.a/f.t.a), good & service tax (gst), labour cess
Tender For corrigendum : supply of lot 1 ms electroforged galvanished grating 25 mm thk weight approx. 35 kg per sqm with hot dip galvanized 120 micronas per soqr page no 24 , lot 2 ms electroforged galvanished grating 25 mm thk weight approx. 35 kg per sqm with hot dip galvanized 120 micronas per soqr page no 24 , lot 3 ms electroforged galvanished grating 25 mm thk weight approx. 35 kg per sqm with hot dip galvanized 120 micronas per soqr page no 24 , lot 4 ms electroforged galvanished grating 25 mm thk weight approx. 35 kg per sqm with hot dip galvanized 120 micronas per soqr page no 24 , lot 5 ms electroforged galvanished grating tread with nosing plate with hot dip galvanized 120 micron as per soqr page no 24
Tender For supply of 52kg pit line bearing plate and fitting per set as under (1). c.i. bearing plate 52kg as per rds o no. mrc/w/pw/1/2004 = 01 no. (2). 6mm thick grooved pad as per rdso no. mrc/w/pw/12/12-93 = 01 no. (3). 12mmthick g rubber pad 52kg as per rdso no. mrc/w/pw/12-93/52 = 01 no. (4). polyethylene in sert as per rdso no. mrc/w/pw/14-93 = 04 nos. (5). ms spiral as per rdso no. mrc/w/pw/14-93 = 04 no s. (6). 28mm dia. anchor stud with nut (hot dip galvanized) as per rdso no. mrc/w/pw/14-93 = 04 nos. ( 7). punched washer as per rdso no.mrc/w/pw/17-93 = 04 nos. (8). triple coil spring washer as per rds o no. mrc/w/pw/15-93 = 04 nos. (9). nylon ferrule as per rdso no. mrc/w/pw/16-93 = 04 nos. [ warra nty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of t-bolt with fly nut & block plate per sketch no.bs-04-06-ta-1&2,rev-1,material:-is- 2062 (galvanized) [ warranty period: 30 months after the date of delivery ]
Tender For supply of taking down of light fittings of any type size and model complete all as specified , taking down of brackets of any type size and model complete all as specified , m and l in repair steel tubular swaged poles complete with cast iron base plate finial taper plug , m and l in repair steel tubular swaged poles complete with cast iron base plate, finial taper plug , re fixing of led street light fittings of any wattage outdoor type complete all as specified and directed. , s and f in repair led street light fitting 120 watt 230 v ac outdoor type with high pressure die cast aluminum hosing , supply and fixing in repair led flood light 80 watt 230 v ac outdoor type with thermal management in multiple optics and equipped , s and f in repair led flood light 150 watt 230 v ac outdoor type with thermal management in multiple optics and equipped , s and f cable junction box 155x210x92 mm in size, made out of thermoplastic having ip 66 protection for outdoor installation fixed with 4 way , supply and passing through steel tubler pole service connection 1100 volts grade multicore fr round insulated copper conductor , s and f single arm bracket made of 40mm dia 1.0mtr long for security light with mounting ms clamp , s and f in repair rigid non metallic pvc conduit of dia 20 mm exclusive of boxes junction terminal but inclusive of all , m and l for earthing complete with ms galvanized plate of size 60cmx60cmx6mm as earth electrode buried directly in ground , taking down out unservicable or servicable ug cable of any cross section area and connection etc. , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth , returning filling in including spreading, levelling watering and well ramming in layers not exc. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , s and l for cable in trenches or passing through pipe, xlpe insulated 25 sqmm 4 core. , s and l for cable in trenches or passing through pipe, xlpe insulated, heavy duty, galvanised steel strip or wire armoured electric lt cable 10 sqmm 4 core. , re laying fixing or passing through xlpe insulated armored electric power ug cable etc. , s and f 40 mm high density polyethylene pipe hdpe of pressure rating 6 kgf cm2 fixed complete to walls ceilings or in floors etc. complete all as specified and directed . , s and f galvanised iron pipe 40mm bore dia light grade for protection of ug cable laid in floors , labour only for horizontal boring for passing protection pipe up to 80mm bore dia under road foot path, not exc. 10.00 mtr , m and l for pcc 1.2.4 type b1 using 20 mm graded aggregate as in coping for pole including form work and finishing the surfaces , m and l for pcc 1.3.6 type c2 using 40 mm graded aggregate as in foundation for pole etc complete all as specified and as directed. , s and f hdpe dwc double walled corrugated of diameter 25 mm including disconnection and connection of cable. , m and l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn , wrecking crow bar or claw bar as per is 706 (q3)