Latest reinforcement tape Tenders | Government reinforcement tape Tenders

Central Government/Public Sector

CTN :41136584

06 Aug, 2025 4.2 Thousand

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of pressure sensitive adhesive plasticized pvc tapes with nonthermosetting adhesive as per is 7809 (part 3 / section 1) (q3) , thread locking adhesive (q3) , m - seal as per is 9197 (q3)

Central Government/Public Sector

CTN :41265944

09 Aug, 2025 NA

Pathankot - Punjab

Tender For supply of glue stick (v2),staplers (v2),double sided tape,pressure sensitive adhesive tapes with plastic base (v3) conforming to is 13262,eraser,markers for white board (v2),permanent marker pen,permanent marker pen

Central Government/Public Sector

CTN :41273004

11 Aug, 2025 1.57 Lacs

Porbandar - Gujarat

Tender For supply of jubilee clip 1 inches , clip jubilee 0.65 x 0.875 inches , cable tie 8 inches nylon , 2 core cable 6a , boric powder , bleaching powder stabilised , baygon spray or equivalent , araldite adhesive 180 gms , clip jubilee 5 inches , clip jubilee 3 by 4 inches , clip jubilee 3.5 to 4 by 8 x 7by8 inches , clip jubilee 3.5 to 4 1by8 inches , clip jubilee 2 x 2.750 inches , clip jubilee 2 inches , clip jubilee 1 1by2 inches , clip jubilee 4 iches , cloth emery 11 x 9 inches is grit 120 279 mm 229 mm , dry chemical powder , cloth hassain medium 102 cm wide rot proffed , cloth emery b5 871by61 grade-1 , fluorescent tape for night marking of emergency ways lifebuoys , cloth terry flex cotton 36 inches width , cloth calico grey 36 inches wide , cloth bunting red 36 inches width 90 cm , linseed oil boiled , oil and grease remover , lint free cloth , heat resistance gloves for galley , grease lg 200 , funnel 5 inches , gloves leather a , lip seal for fire hydrant , call boat swain , petroleum jelly , dust pan , tray paint roller , goggle safety , tapes measuring 15 mtrs , polythene bag 14 x 20 x 75 micron , chain ni silver for call boatswain ) /bid number : gem/2025/b/6481079 * /dated: 31-07-2025 & & / bid document 1 / 32

CTN :41282519

11 Aug, 2025 NA

Ganganagar - Rajasthan

Tender For supply of pvc copper cable single core and multi core circular sheathed cable with rigid conductor (v2) as per is 694 (q2) , pressure sensitive adhesive plasticized pvc tapes with nonthermosetting adhesive as per is 7809 (part 3 / section 1) (q3)

CTN :41282822

11 Aug, 2025 NA

Bangalore - Karnataka

Tender For supply of rollerball pen (v3) (q4) , permanent marker pen (q4) , glue stick (v2) (q4) , sticky notes (v2) (q4) , self adhesive flags (v2) (q4) , pressure sensitive adhesive tapes with plastic base (v3) conforming to is 13262 (q4) , binder clips (v2) (q3) , scissors (q4) , staplers (v2) (q3) , stapler pin / staples (v2) (q4)

CTN :41256073

21 Aug, 2025 NA

Mohali - Punjab

Tender For supply & installation of lab equipment for aicte-idea lab at chandigarh engineering college-cgc, landran, mohali-, laser cutter, 2, vinyl cutter, 1, 3, 3d printer, 1, 3d scanner, 1, 4, cnc router, 1, mini desktop lathe cum milling, 1, drilling m/c 1 hp motor, , handheld high speed drilling m/c-15000 rpm with accessories - 2 nos., benchtop grinder machine, solder stations (5 nos.), desoldering m/c, advanced, motorized sewing machine, wood lathe, power tools, portable welding m/c, refrigerator, normal and microwave oven, magnifying glass with stand-2 nos., digital microscope, , digital storage oscilloscope, 1, signal generator, 1, variable power supply, 1, benchtop multimeter, 1, projector, 1, heavy duty laser printer, 1, pcb milling machine", 1, pcb prototype machine, computer workstation in networking- 5 nos., quardcopter assembly kit, 1, 5, 1, smart board, 1, relay module, electric bicycle motor & access, granite surface plate, vacuum cleaner, hot air gun-5 nos., measuring equipment [vernier calliper (0-200/0.01),, vernier height gauge (0-1000mm), micrometer 0-50, 50-100/0.001 inside and outside)], metal scale etc., fire extinguisher, first aid box, digital multimeter (5 units), clothes iron (5 units), electronic component repository (lcr meter, variac etc.), 3d printer filament (depending on the printer, 2 rolls), acrylic sheets (2mm,3mm, 4mm, 5mm all of area 8ft x 4ft) 2 sheets each, foam sheets (krum, 10mm, 12mm, 15mm all of area 8ft x 4 ) 2 sheets each, ply boards (8mm, 12 mm, 18mm, all of area 8ft x 4ft) 2 sheets cach, nylon rods, 12mm, 15mm, 18mm, 25mm all of length i m.5 cach, nuts, 3mm, 4mm, smm, 6mm, 8mm, 10mm, 12mm,100 cach, bolts, dia (3mm, 4mm. smm, 6mm, 8mm, 10mm, 12mm) length (1", 1.5", 2" 2.5"),100, cach, screws.3mm, 4mm, 5mm,100 cach, washers, 3mm, 4mm, smm, 6mm, 8mm, mm, 12mm, 100 cach, studs,6mm, 8mm, length 1m5 each, nails, 1", 2", 3", 100 each, adhesives, m-seal. feviquich, fevi bond, 10 cach, 2way tapes 20 rolls,, pvc pipes, 75°. 1". 1.5", 2.5" 3" length 10ft,1 each, aluminum channels, l, c, box, strip length 12ft.2 each, pcb drill bits,0.5mm, 0.8mm, 1mmm,20 cach, drill bits, jmn, 4mm, smm, 6mm,,20 each, drill bits, 8mm, 10mm, 12mun,5 each, carpentry boring bits, entire kit, 1 kit, electronic active and passive components, resist ors, capacitors, diodes and transistors, 10 each, usb cables for connecting arduino and other development boards.10, radium cutter knives 10, glue sticks.,50, hack saw blades,6" and, 9v battery snaps 20, lan cables, for connecting raspberry pi,5, 9v batteries, 20, hacksaw (5 nos.), micro chisel set (3 nos.), , pliers (3 sets), 3, manual pcb drilling machine (3 nos.), pcb power drilling machine (3 nos.), 3, 3, cordless drilling machines (2 nos.), 2, jigsaw machines (2 nos.), power circular saw (2 nos.), files set (2 sets), 2, file handles (1 set), 1, needle files (2 sets), standard workshop tool, pipe vice (2 pcs.) 2, mini hacksaw (5 nos.), , ball peen hammer (5 nos.), steel shafi claw hammer (5 nos.), nylon mallet (5 pes.), rubber mallet (5 pcs.), allen key set (3 sets), dremel malti tool kit (2 nos.), double ended spanner sets (2) sets), 12 piece open ended spanner set (2 sets), belt and disc sanding machine (1 nos.), scroll saw machine (1 no.), tool wall covering perforator (3 pes), dremel moto saw, bench grinding machine, power return measuring tape (5 nos.), tri square 8" (5 nos.), stamless steel rule (5 nos.), digital vernier caliper (5 nos.), spirit level (5 nos.), dremel cordless rotary tool, gpio power router, sewing machine, impact drill (3 units), ratchet set (2 units), router bit starter kit, scroll saw, hot air blower with soldering iron (5 nos.), tin cutter with spring (10 units), centrifugal blower, screwdriver sets (2 sets), cutting mats (5 nos.), vacuum cleaner (2 nos., hot air gun-5 nos., micrometer-5 nos., glue gun-5 nos., air compressor, allen set wrench (5 set), tongue and groove pliers (5 pcs.), non-contact voltage tester (5) pes.), wire stripper (5 p

CTN :41041834

08 Aug, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For corrigendum : e-tender for electrical spares supply and electrical works at sp gramin chhatrapati sambhajinagar - electrical spares supply, supply of sequential lights for all vehicles, supply of revolving lamp assemblies for all vehicles, supply of siren assemblies for all vehicles, supply of pa systems for all vehicles, supply of other electrical accessories (hl bulb, holders, insulation tapes, wires, parking bulbs,starter, alternator, wiper motor, etc.) for all vehicles, electrical works, overhauling all types of starters, overhauling all types of alternators, starter armature rewinding, repairing battery charging machine, battery terminal soldering, starter brush soldering

CTN :41217837

05 Aug, 2025 30.00 Lacs

Jaipur - Rajasthan

Tender For request for proposal for supply of lto-9 tapes (backup cartridge &amp cleaning tape with barcode labels) for ibm ts4300 tape library

CTN :41208132

13 Aug, 2025 30.00 Lacs

Jaipur - Rajasthan

Tender For request for proposal for supply of lto-9 tapes (backup cartridge & cleaning tape with barcode labels) for ibm ts4300 tape library

corporations/Associations/Others

CTN :41208690

07 Aug, 2025 NA

Surat - Gujarat

Tender For item rate tender for repairing and renovation of carpentary works in sub zone-1 of south west (athwa) zone. - providing & fixing powder coated aluminium partly glazed and partly panelled partition using medium duty sections of hindalco, zindal, narmada, banco or equivalent approved make having section 63.50 mm x 38.10mm ( frame-.758 kg/rmt & middle section- 0.819 kg./rmt), galzing clip with 5 mm thick clear float glass of approved make including all other necessary fittings and fixtures. entire work will have to be made water proof using necessary rubber sectioned wherever required. gaps all round the frame to be filled with approved water proof sealent. bottom portion of doors both side to be covered with 12mm thick prelaminated particle board of approved make and quality and as per design., providing & fixing partly panel & partly glass powder coated aluminium doors with aluminium section of hindalco, jindal , narmada,banco or equivalent approved make having poder coated outer frame leg partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. / r.m. shutter section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), glazing clip (jindal section no. 19370 wt. 0.109 kg./ mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of greenlam, panama or archid make as approved by engineer-incharge including fixing brass pivot, handle, lock etc. complete., providing & fixing window having extruded aluminium colour powder coated / colour anodize section frame main outer size 63.50 x 38.10 x 1.95 mm ( of jindal section no.: 4605,@ wt. 1.094kg/mt.) horizontal two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section no : 8687, @ wt. 0.695 kg/mt.) vertical member of size 61.85 mm x 31.75mm x 130mm ( of jindal section no : 8758 @ wt. of 0.659 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8947, @ wt. of 0.456 kg/mt/section 8948, @ wt. of 0.457 kg/mt) with 5 mm thick transparent silicon sealant glass fixing to frame as per details etc., providing & fixing window having extruded aluminium colour anodize section frame main outer size 95 mm x 24 mm x 1.17 mm ( of jindal section no.: 2459,@ wt. of 0.738 kg/mt.) horizontal three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no : 8688, @ wt. 1.07 kg/mt.), vertical member of size 92 mm x 31.75mm x 1.50mm ( of jindal section no : 8933 @ wt. 1.06 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8949, @ wt. of 0.456 kg/mt/) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per details etc., providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of jindal section no.14080, @ wt. 0.471 kg per mt) with colour powder coated alluminium frame for lovered glass ventilation with 4 mm thick figured glass as details etc. complete for ventilation., providing & fixing panels -12mm thick indian gypsum panels of saint gobin brand, screwed to g.i. gram at 200mm c/c, frame g.i. frame fabrication with 60 x 26 x 0.5mm perimeter channels as required, 155 x 5 x..55mm intermediate channel at 1220mm c/c, 25 x 10 x 0.55mm ceiling angle at 1220 mm c/c, securely fixed soflit hangers at 1220mm c/c, false ceiling angle shall not at more than 610 mm from adjan wall connecting clips, etc, as required complete as per manufacture specifactions, joints all joints of panels field and finished with indian gypsum, jointing compound, joining tapes, etc. complete including scaffolding as required complete in all respects by engineer in charge., supply & fixing of 16mm.th.armstrong classic lite square edge mineral fiber celling with 24mm grid(l

Reinforcement Tape Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others