Latest relay tester scrap Tenders | Government relay tester scrap Tenders

Corporations/Associations/Others

CTN :40955745

18 Jul, 2025 12.66 Lacs

Multi City - Karnataka

Tender For supplying of water supply materials for yearly tender of the year of 2025-26 - extra blade (size 24x2x0.100) (rate as per market rate)bkr, teflon tape (tape size 12 mm x 10 mtr) (rate as per market rate)bkr, solvent cement (rate as per market rate)bkr, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and valves and provision for corresponding dia ms flanges etc. complete for sluice valve of pn -10.0 and 80mm (item no. 2.23.2 page no. 22 volum-5 pwd sr-2023-24)bkr, size 80 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, size 65 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply and delivery at site of brand new best make non-return valve as per is 778/1984 with isi mark and as per its latest amendments size 50 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni, outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 indoor type note 1) dol- direct online starter 2) s-d- star delta starter etc. complete. for outdoor 3 to 6 hp pumps (item no. 13.24.2 page no. 155 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni with phase selector switch, isolating switch outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 no. electrcal protection like single phase preventor. upto 3 hp pumps (item no. 13.23.1 page no. 154 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 135 lpm at 110 m equl 12 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 155 lpm at 84 m equl 10 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000, 3phase, ss bowl and impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. for 3 hp etc. complete 6.50 hp - 245 lpm at 70 m equl 8 stg outlet dia - 2.50 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 2.00 hp/1.5kw 20 stg (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24) bkr, supply of isi mark 175mm nominal bore, plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to is 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends. isi marking weighing 25.10kg/m.prices include collar-medium duty. (item no. 12.32 page no. 134 volum-5 pwd sr-2023-24)bkr, for 150 mm dia gi tee (item no. 11.9.11 page no. 130 volum-5 pwd sr-2023-24)bkr, for 125 mm dia gi tee (item no. 11.9.10 page no. 130 volum-5 pwd sr-2023-24)bkr, for 100 mm dia gi tee (item no. 11.9.9 page no. 130 volum-5 pwd sr-2023-24)bkr, for 80 mm dia gi tee (item no. 11.9.8 page no. 130 volum-5 pwd sr-2023-24)bkr, for 65 mm dia gi tee (item no. 11.9.7 page no. 130 volum-5 pwd sr-2023-24)bkr, for 50 mm dia gi socket (item no. 11.9.6 page no. 130 volum-5 pwd sr-2023-24)bkr, for 40 mm dia gi tee (item no. 11.9.5 page no. 130

State Government

CTN :40950568

16 Jul, 2025 10.40 Lacs

Akhnoor - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 250 kva servo controlled automatic voltage stabilizer, control panels, mccbs, providing laying of new 240 sq.mm, 3.5 core aluminum armoured cable 60 mts. approx and allied works at govt. nursin - supply, installation, testing and commissioning of 250 kva servo controlled automatic voltage stabilizer, 3 phase, oil cooled (transformer oil to be the cooling medium conforming to is-335 with latest amendments) conforming to is-8447-1989, is-9815 i & ii of 1994 amended up to date. the voltage stabilizer should be suitable to operate on unbalanced input voltage of 200-460 volts and delivering output voltage of 415 + 1% volts, 3 phase, 50 + 3% cycles/second frequency, a.c. power supply. the stabilizer shall be copper wound in sheet steel case duly painted with providing & first filling of transformer oil. the stabilizer should be fitted with wheel rollers for easy portability with the technical specifications as given hereunder:acceptable makes: servokon/electricfield/ ae or any reputed make confirming to relevant is codecomplete job on turnkey basis as per scope of work, providing and laying of new 240 sq.mm, 3.5 core pvc sheathed xlpe aluminum armoured cable (60 mts. approx.) of havells/gloster/kei/polycab or any other reputed make from ht transformer to (input, output & bypass) panel of 250 kva servo stabilizer at govt. nursing college, akhnoor, jammu. the labour charges, carriage, erection, thimbling and taxes are included in the job. the job also includes p/f of main switch hrc 4 pole type 630 amp. (01 no.).complete job on turnkey basis. job includes cost of material, labour charges (skilled and unskilled), transportation and handling charges for material and other equipments. any work/items not mentioned in the scope of work but deemed necessary for completion and commissioning of this project shall deemed to be included in the scope of work.

State Government

CTN :40950747

18 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25 mm dia , sitc

Central Government And Public Sector

CTN :40962836

25 Jul, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of calibration of equipment and machine - shore a hardness tester , electronic balance , reversion test apparatus , vernier calliper , measuring tape , steel scale , micrometer ball point analogue , micrometer analogue , micrometer digital , micrometer ball point digital , muffle furnace , cold chamber , vicat softening point test apparatus , oxidation induction tester , oxidation induction tester flow meter of o2 , oxidation induction tester flow meter of n2 , carbon black contents test apparatus , carbon black contents test apparatus flow meter of n2 , melt flow index apparatus , digital thermo hygrometer , digital humidity chamber , environmental chamber , hydraulic press tempareture controller , glass thermometer , bursting strength tester 1 , bursting strength tester 2 , digital stop watch , std calibration glass tube for bendsten smoothness and porosity tester , standard reference gloss tile , gloss meter , standard reference brightness tiles , brightness opacity and colour test apparatus , electronic reflectance meter , paper thickness apparatus dial indicator , thickness micrometer digital , folding endurance tester , digital temp. controller with sensor for water bath , hydrostatic pressure test apparatus 02 stations , hydrostatic pressure test apparatus 04 stations , irhd hardness tester digital dial gauge , colour matching cabinet , counter meter pilling test apparatus , digital temp controller with sensor j type launder o meter , bench type thickness gauge , weight perspirometer , tensile strength tester , tensile testing machine , universal testing machine , crock meter , multi cell ageing oven , toe impact tester for safety shoes , sole adhesion tester , sole leather grain crack tester , water vapour permeability tester digital timer , heat insulation tester digital temperature cont. cum indicator with sensor , heat insulation tester digital temperature cont cum indicator with sensor , leakage proofness tester dial pressure gauge , leakage proofness tester digital timer , cold ross flex tester digital temperature controller , bally water penetration tester , digital temperature controller in deep freezer cold insulation tester , bally flexometer tester dig counter meter , veslic rub fastness tester dig counter meter , din abrasion tester dig counter meter , martindale abrasion tester dig counter meter , full shoe flex tester dig counter meter , bennewart flexometer dig counter meter , bata belt flex tester , shoe lace to eyelet abrasion tester , resistance to hot contact dig temperature controller cum indicator with sensor , blade cut resistance tester , de mattia flex tester , low temp vamp flex tester , velcro fatigue tester , steel plate flex tester , water absorption and desorption permometer dig timer , dynamic water resistance tester , fibre board flexing tester , ankle protection tester , compression cum nail penetration and energy absorption for seat region , digital lastometer , rigidity tester , precision thickness micrometer , slip resistance tester for shoe

Central Government And Public Sector

CTN :40956959

07 Jul, 2025 NA

Multi City - Multi State

Tender For plummer block sn 522 of m/s. winco/knr/skf/ntn/timken/fag along with bearing w ith steel cage to part no.23222 skmb of m/s.fag or 23222 kejw33 of m/s timken or 23222 emkd1 of m/s ntn or skf and sleeve h-2322 of m/s j&j/m&m/cosmo/sibco/knr/timken/ntn/skf/fag with l ocating ring & felt. for kind attention of tenderers special conditions for purchase of bea rings: 1)the authorized agents shall supply bearings with original manufacturer's tamper p roof seal. 2) the authorized agents shall furnish inspection certificate from manufactures or their authorised testing agents, preferably incorporating the details of traceability of the products proposed for supply. 3)tenders are required to quote for the following mak es only mis.winco/knr/skf/ntn/timken/fag. 4) authorisation dealership certificate shall be su bmitted along with the supply. [ warranty period: 30 months after the date of delivery ]

CTN :40640256

07 Jul, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras bid to ras supply of genr set - supply, installation, testing and commissioning of 58.5 kva cpcb iv plus compliant gen set, efficient crdi system 02e series - low emission job no 2790 as per store list attached , cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold,ambuja,ultratech, acc,jk,dalmia,isi equivalent , coarse sand free from vegitation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hard core 40 to 63 mm graded , stone for rr masonary less than 6 inch , pre painted galvatume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa of size 08 feet x 3feet as per store list , ms pipe med grade 50mm dia confirming to is 1611- 1998 - jindal,tata,sail,isi equivalent , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make-berger,asian, nerolac,isi equivalent , synthetic paint enamelled og confirming to is 5-2004 make-berger,asian,isi equivalent , thinner make-nerolac,berger, asian,isi equivalent , self driving scrw for ppgi sheet 100 nos oblique pkt , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos oblique pkt , mcb spn 240 volts 32 amps make-havells,finolex,polycab,natural white or equivalent , mcb sp 6 to 32 amps make-havells,finolex,polycab,natural white or equivalent , pvc tape 19mm wide 5m long makesteel grip, anchor, kilinjal,isi equivalent , on load change over switch within sheet steel enclosure 100 amps, 4 pole, tpn confirming to is 13947 part 3 2607 makehavells,standard,l and t,isi equivalent , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core frls as per store list , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2.5 sqmm single core frls as per store list , cable xlpe insulated screened pvc bedded, galvanised steel strip or wire armored electric power cable size 50 sqmm 3.5 core, frls as per store list , switch piano 5 amp 230 volts flush type one way snow white makehavells,finolex,polycab,natural white or equivalent , switch socket combination snow white multipurpose 2 in 1, 15a, 230v make-havells,finolex,polycab,natural white or equivalent , led tuble light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete make-havells, bajaj, philips,crompton,isi equivalent , screw full thread 6x19 mm isi marked 200 screw per pkt , pvc switch board snow white of size 7 inch x 4 inch for socket and switches makesupreme,polycab, finolex,isi equivalent , ceiling rose three terminal snow white make-anchor,ssk,cona,isi equivalent , pvc round oblique squire block makepolycab,supreme,finolex,isi equivalent , distribution box 4 way, double door spn 240 volts copper bus bar and neutral link earthing stud conforming to is-13032 and is-8623 double door type make-havells,legrand,l and t,isi equivalent , service cable pvc insulated aluminium conductor, 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed in service connection 6 sqmm 2 core as per store list , earthing plate 600x600x6mm galvanised steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia near one side , ci earthing pit cover of size 300x300x6mm with angle iron isa 20x20x3mm thick ms frame , funnel fitted with 20mm dia gi pipe 1.5m long make- jindal, tata, kaling,isi equivalent , galvanized iron strip 32 x 6 mm , charcoal , salt normal , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make-birla gold,ambuja, ultratech,isi equivalent , coarse sand free from vegetation qty-2.8 cum , coarse aggregate 20mm graded qty-2.8 cum , coarse aggregate 40mm graded qty-2.8 cum

CTN :40962784

22 Jul, 2025 NA

Pakur - Jharkhand

Tender For supply of battery terminal made with brass , gland packing 8 mm thick rubber , emery paper of sorts , oil putty for glazing , ms hasp and stapple 75mm long , haps staple 100mm , timer switch for street light , rubber mat 2000x1000x12mm , ac metal clad box with plug top and mcb 20 amp , switch socket combination 6amp , switch socket combination 15amp , socket 6 amp 5 pin , piano switch 5a , bed switch 5a , db spn 8 way , db spn 4 way , angle batten holder , lamp holder , batten holder , pendent holder pvc , bell buzzer ding dong , regulator electronic type for ceiling fan , bell push switch , tape adhesive 25mm , ampire tape 25mm x 25 mtrs , insulation tape 15mm width , pvc flexible conduit pipe 20mm , casing capping size 25x32mm , plug top 3 pin 15a , plug top 3 pin 5a , fuse wire 20a , fuse wire 10a , fuse wire 5a , ceilling rose , lead sheet 3 mm , thermostat for geyser , heating element 1500 watt , heating element 2000 watt , indicator red green for geyser , coolent for dg set , engine oil 15w40 for dg set , engine oil 20w40 for dg set , dol starter 5 hp , cotton waste , distilled water , leather gasket 5mm , gi tee equal 40mm , ferric alum for water treatment purpose , calcium based chlorine chemical for water treatment , orthotodoline solution for chlorine testing , gi nipple 20 mm x 75mm , gi nipple 20 mm x 150mm , cp grating 150mm dia , cp grating 100mm dia , cp stop cock 15 mm , gi elbow 15 mm , gi elbow 20mm , gi union 15mm , gi union 20mm , gi tee 20 mm , gi tee 15mm , gi long screw 15mm x 150mm , gi long screw 20 mm x 150mm , gi socket 15mm , gi socket 20mm , gi reducer socket 15mm x 20mm , gi reducer elbow 15mm x 20mm , gi pluge 20 mm , gi pluge 15 mm , tarfelt in 20 mtr roll , plywood 8x4x4mm thick , plywood 8x4x6mm thick , partical board 8 x 4 x 19 mm , alumn sheet 0 point 5mm thick , stainless steel wire mesh 0 point 36 mm nominal dia of wire 15 mtr roll , ms handle 100mm , ms handle 150mm , ms tower bolts 200mm , tower bolt ms 150mm , aluminium tower bolt 150mm , alumn handle 125mm , curtain rod cp , steel knobs with bracket , m s but hinges medium weight 100 mm , m s but hinges medium weight 50 mm , m s but hinges medium weight 75 mm , wooden beading for fixing glass 10x10mm , hacksaw blade 25mm x 300mm , ms sliding door bolt 300mm , nails wire 65 mm , screw wood steel 25 mm , screw wood steel 15 mm , screw wood 40 mm , ms screw 50mm , condenser 1 point 5 mfd for wall fan , fuse wire 30 amp , teflon tape 10mm width , metal repair paste , aluminium tape water proof 50mm width , chlorine test kit , capacitor for ac 35 mfd , capacitor for ac 45 mfd , capacitor for ac 55 mfd , bearing grease for high power rating pump motor viz 100hp 60hp and 40hp

CTN :40962911

17 Jul, 2025 5.00 Lacs

Kupwara - Jammu And Kashmir

Tender For repair of cordless impact d d - repair of cordless impact wrench , repair of test jig for pc testing , repair of portable welding machine , repair of steel cutter , repair of boost battery charger , repair of veh washing spray plant , repair digital tachometer

CTN :40566700

07 Jul, 2025 NA

Darjeeling - West Bengal

Tender For bid to ras corrigendum : tender for supply of digital clamp meter (600 amp , ) , digital battery tester 13ct 700 , hydro meter , battery pole die +ve , -ve , alternator test bench , 1/4 inch square drive matrix socket set(46 pcs) , multimeter 600v (ac/dc) , refracto meter for def checking 6 in 1 function , alternator regulator tester (vegas) v 414 , safety goggles , torx key set -kth95 (9nos) , distilled water plant (aqua works (3000 watts (5 ltr /hr) , lathe carbide inserts cutting tool for machine steel parts(tnmg 331- maus) , insert cutting tool holder , magnise cnc tools holder(6/7/8/10/12mm lathe boring bar set ccmt carbide insert) , cnc lathe turning tools holder mgehr 1212-2 12x100mm boring bar 10pcs mgmn 200-g carbide inserts high hardness cutter dz10 , cobalt step drill bit spiral size 3mm to 25mm , hss drill bit 1 mm to 6mm 10pcs set , carbide threding inserts gbj-10 pcs 16 erag 60 , carbide threding inserts gbj-10 pcs 16 irag 60 3/8 inch , insert holder(16er ag60 , 16 irag 60 gold) , tap & die (8x1.25mm) , tap & die (10x1.5mm) , tap & die (12x1.5mm) , tap & die (14x1.5mm) , tap & die (16x1.5mm) , tap & die( 18x1.5mm) , tap & die (20x1.5mm) , tap & die (22x2.5mm) , tap & die a nf 1/4 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , 5/16 inch , tap & die bsp 5/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , steel rule 24 inch , reamer (adjustable) size- 22mm to 28mm , reamer (adjustable) size- 28mm to 35mm , reamer (adjustable) size- 35mm to 40mm , reamer (adjustable) size- 38mm to 45mm , straight shank drill bit 10.5 , 12 , 12.5 , 14 , 16 , tapper shank drill bit 16mm , 17.5mm , 18mm , 19mm , 20mm , 22mm , 24mm , 32mm , 45mm , marking block magnetic base with dial gauge (for lathe machine) , hss cutting tool size 1/4x100mm , 3/8x100mm , 1/2x100mm , niddle grinder 600w , drill sleeve 1-2 size , drill sleeve 1-2 size , drill sleeve 3-4 size , cutting disc 1.5x100mm , grinding disc 4x100mm , painting brush 2 inch , 4 inch , helmet mask , writing brush , pilot spray gun (cup type) 1 ltr capacity , nozzle tip cleaner (gas cutting nozzle) , spark lighter , angle grinder light duty 600w , anvil heavy duty (akt 25) , hand drill machine heavy duty 750w (size 1 to 30mm) , bench grinder , criclip plier (in side) , criclip plier (out side) , nose plier 10 inch , socket heavy duty 34 mm , socket heavy duty 55 mm , socket heavy duty 60mm , socket heavy duty 65 mm , socket heavy duty 70mm , socket heavy duty 80mm , injector opening box spanner 24 mm , injector opening box spanner 27 mm , allen key set (in inch) , allen key set (mm) , micro mete 0 to 25mm , micro mete 26 to 50 mm , micro mete 51 to 75 mm , micro mete 76 to 100 mm , dial gauge set for inner bore dia checking 02 mm to 200 mm , hyd pressure gauge test kit 100 to 600 bar , diesel engine compression pressure gauge test kit , mechanical jack 30 inch , pipe wrench 12 inch , fip high pressure line removing/fitting spanner 17 no & 19 no , fip opening ring spanner 14x15 & 12x13 , pre stroke tool for all inline/rotary diesel engine , injector testing pipe for fip test bench (600x6x2) , dropping tube for pump testing , fip test bench mini compressor for testing of pressure boost portable , fip gear removal tool for engine , c type ring spanner 10x11mm & 12x13mm , scissors 12 inch , claw hammer 200 gms , hammer 1/2 kg , hammer 1 kg , hammer 5 kg , chisel 6 inch-9 inch , center punch 4mm x 4 inch , adjustable oil filter wrench , light duty socket set , havy duty socket set , single end spanner 17 , 19 for fitting / removing of injecter pipe , hand press machine 50 ton capacity , bench vice 8 inch heavy duty , light duty drill machine , light duty hand grinder , nose plier 12 inch , electric planner 550w , hand drill machine 800w , electric rotary hammer machine 720w

Corporations And Associations And Others

CTN :40937203

10 Jul, 2025 4.74 Lacs

Delhi - Delhi

Tender For procurement of electrical material for day to day repair and maintenance at various ctcs (community toilet complexes) and pts (public toilets) under south zone (for swachhta survekshan - 2025) - rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/pvc conduit including dismantling as required.group c, supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3x1.5 sq. mm, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3x2.5 sq. mm, supplying and fixing following piano type switch/ socket on theexisting switch box/ cover including connections etc. as required. (a)5/6 amps switch, supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (a) 3 pin 5/6 a socket outlet, supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 a socket outlet and 15/16 a piano type switch, connections, painting etc. as required., installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.upto 450 mm sweep, supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole, supplying and fixing following rating ,double pole,240 volt,isolator in the existing mcb db complete with connections,testing and commissioning etc. as required.(b) 63 amps, supply of 250 mm (10 inch) sweep 1250 rpm exhaust fan fresh air type complete with shutter blades etc. as required., supplying, installation, testing & commissioning of led surface mountedbatten light of following body material and construction as per is : 10322with driver (replaceable) as per the requirement with driver efficiency>85% ,operating voltage ac 140-270 volt, freq 50/60 hz, operating temprange -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv withshort & open circuit protection ,thd 10% , p. f. 0.95, ip20, cri >80,flicker free, (flicker should be below 5 %), life time (led,driver & electricalcircuitary), of minimum 50000 burning hours with , 70% of initiallumen maintained till life ends, cct 3000 k / 4000 k / 5700 k/6000 k/6500 k (as per ansi bin), sdcm(standard deviation colormatching) 3, maximum power consumption should not more than thespecified rating and fixture shall be of relevant bis standard and trademark certificate ( t.c.). manufactures word mark/ name engraved/embossing/ screen printing on housing. complete in all respect i/cconnections with 1.5 sq mm frls, pvc insulated copper conductorsingle core cable and earthing etc. as required with minimum 5 year oemwarranty. system lumen efficacy 105 120 lm/watt output . lm79 & lm80test report from nabl lab for all testing required for led fixtures asper bis shall be submitted. shape size and cct shall be as approved byengineer-in-charge as per requirement. (thermal management: heat sinkof aluminum housing such that led junction temperature shall not riseabove 90 c). 18- 22 watt, supply,installation,testing and commissioning of single /three phase monoblock pumpset complete with all accessories workable on 240/

Relay Tester Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

State Government

State Government

Central Government And Public Sector

Central Government And Public Sector

Corporations And Associations And Others