Latest resistance valve Tenders | Government resistance valve Tenders

State Government

CTN :40956041

11 Jul, 2025 4.79 Lacs

Hyderabad - Telangana

Tender For procurement of ci sluice valves for the month of march-2025 to may-2025 for sahebnagar stores sub division-iv under central stores division

State Government

CTN :40950747

18 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25 mm dia , sitc

CTN :40962595

18 Jul, 2025 NA

Kolkata - West Bengal

Tender For supply of different line valves and sounding head with cap and chain brass for mpv - g1_1_dn125 nr v-v_body-ci_trim-bronze flanged , g1_2_dn80 nr v-v,body-ci, trim-bronze flanged , g1_3_dn65 sdnr v-v, body-ci, trim-bronze flg , g1_4_dn50 hydrnt vv ihc_f,body-ci,trim-bronze , g1_5_dn15 ball v-v, body-ci, trim-bronze flg , g1_6_dn15 ball v-v, body-ci, trim-ss_flanged , g1_7_dn125 nr v-v_body-ci_trim-bronze flanged , g1_8_dn80 nr v-v,body-ci, trim-bronze flanged , g1_9_dn65 sdnr v-v, body-ci, trim-bronze flg , g1_10_dn50 hydrnt vv ihc_f,body-ci,trim-bronze , g1_11_dn15 ball v-v, body-ci, trim-bronze flg , g1_12_dn15 ball v-v, body-ci, trim-ss_flanged , g1_13_dn125 nr v-v_body-ci_trim-bronze flanged , g1_14_dn80 nr v-v,body-ci, trim-bronze flanged , g1_15_dn65 sdnr v-v, body-ci, trim-bronze flg , g1_16_dn50 hydrnt vv ihc_f,body-ci,trim-bronze , g1_17_dn15 ball v-v, body-ci, trim-bronze flg , g1_18_dn15 ball v-v, body-ci, trim-ss_flanged , g1_19_dn125 nr v-v_body-ci_trim-bronze flanged , g1_20_dn80 nr v-v,body-ci, trim-bronze flanged , g1_21_dn65 sdnr v-v, body-ci, trim-bronze flg , g1_22_dn50 hydrnt vv ihc_f,body-ci,trim-bronze , g1_23_dn15 ball v-v, body-ci, trim-bronze flg , g1_24_dn15 ball v-v, body-ci, trim-ss_flanged , g2_25_80nb ball float v-v w-o anti flash arrgt , g2_26_125nb ball float v-vwith anti flsh arrgt , g2_27_200nb ball float vv w-o anti flash arrgt , g2_28_65nb ball float v-v w-o anti flash arrgt , g2_29_80nb ball float v-v w-o anti flash arrgt , g2_30_125nb ball float v-vwith anti flsh arrgt , g2_31_200nb ball float vv w-o anti flash arrgt , g2_32_65nb ball float v-v w-o anti flash arrgt , g2_33_80nb ball float v-v w-o anti flash arrgt , g2_34_125nb ball float v-vwith anti flsh arrgt , g2_35_200nb ball float vv w-o anti flash arrgt , g2_36_65nb ball float v-v w-o anti flash arrgt , g2_37_80nb ball float v-v w-o anti flash arrgt , g2_38_125nb ball float v-vwith anti flsh arrgt , g2_39_200nb ball float vv w-o anti flash arrgt , g2_40_65nb ball float v-v w-o anti flash arrgt , g3_41_32nb sounding head with cap and chain_brass , g3_42_32nb sounding head with cap and chain_brass , g3_43_32nb sounding head with cap and chain_brass , g3_44_32nb sounding head with cap and chain_brass

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

CTN :40627357

11 Jul, 2025 NA

Bokaro - Jharkhand

Tender For corrigendum : spares for esp of boiler 9 - butterfly valves, cat. no. 09000116002guide plate u-profile for collecting electrodes, cat. no. 09000116024hammer assembly for crm, cat. no. 09000116025hammer assembly for erm, cat. no. 09000116026hammer assembly for inlet gd rapping machanism, cat. no. 09000116300ci bearing for crm, cat. no. 09000116301ci bearing for erm, cat. no. 09000116302ci bearing for inlet gd rapping mechanism, cat. no. 09000116021shaft complete with sleeve of crm, cat. no. 09000116008shaft (horizontal) complete with sleeve of emitting rapping machanism, cat. no. 09000116011vertical shaft of emitting rapping drive, cat. no. 09000116303shaft end (vertical) of emitting rapping drive, cat. no. 09000116304shaft complete with sleeve of inlet rapping mechanism, cat. no. 09000116305adjusting ring/set ring for rapping shaft, cat. no. 09000116306clutch couplingset for collecting rapping drive, cat. no. 09000116307grip coupling set for inlet gd rapping drive, cat. no. 09000116308grip coupling set for emittingrapping drive, cat. no. 09000116309pin wheel (big+small) for emitting rapping drive, cat. no. 09000116310bottom bearing for emitting rapping drive, cat. no. 09000116311bottom bearing shaft for emitting rapping drive, cat. no. 09000116312bush bearing for emitting rapping drive, cat. no. 09000116313bearing cage of bush for emitting rapping drive, cat. no. 09000116314shock bar for collecting system, cat. no. 09000116013shock anvil with fasreners for collecting rapping, cat. no. 09000116014shock anvil with fasreners for emitting rapping, cat. no. 09000116015shock bar guide for collecting rapping system, cat. no. 09000116315attachment for shock bar guide of collecting rapping system, cat. no. 09000116316clamp for shock bar guide of collecting rapping system, cat. no. 09000116317flat for shock bar guide of collecting rapping system, cat. no. 09000116318inlet gd screen (plate-a), cat. no. 09000116319inlet gd screen (plate-b), cat. no. 09000116320inlet gd screen (plate-c), cat. no. 09000116321guide vane for inlet gd screen (type-1), cat. no. 09000116322guide vane for inlet gd screen (type-1), cat. no. 09000116323guide vane for inlet gd screen (type-1), cat. no. 09000116324geared motor with gear box for emitting rapping mechanism, cat. no. 09000116325geared motor with gear box for collecting rapping mechanism, cat. no. 09000116175gland for emitting rapping drive, cat. no. 09000116176gland for collecting rapping drive, cat. no. 09000116177gland for inlet gd rapping drive, cat. no. 09000116326shim plate for above c.i. bearing, cat. no. 09000116003shim plate (loose) for shock bar

Central Government/Public Sector

CTN :40927919

23 Jul, 2025 25.00 Lacs

Imphal - Manipur

Tender For repair/maint of ci/di and gi pipes of different sizes including repairs/replacement of sluice valves, air release valve and valve, gate valves, valve chamber pits at lower leimakhong and koirengei.

Central Government/Public Sector

CTN :40906730

22 Jul, 2025 47.96 Lacs

Shahjahanpur - Uttar Pradesh

Tender For 8433/e8 repair/maint and replacement of pipe line network feeding , ci/gi/hdpe/pvc pipes, valves and allied works at hq ub area units, fafa, dca colony, lokhart line, sarvatra and other otm and md accn of ub area under ge (east) bareilly

State Government

CTN :40851482

11 Jul, 2025 12.58 Lacs

Birsinghpur - Madhya Pradesh

Tender For corrigendum : procurement of ci ebonite lined diaphragm valves and taper plug valves for dm plant i and ii at sgtps mppgcl birsinghpur

Central Government/Public Sector

CTN :40648871

08 Jul, 2025 35.00 Lacs

Ambala - Haryana

Tender For corrigendum : repair maintenance to gi ci and di pipe lines gate sluice valves and miscellaneous work of water supply system at sector c under ge utility ambala

State Government

CTN :40565555

16 Jul, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of low pressure valve for unit no. 1 to 8 at wanakbori tps. - rubber lined diaphragm valve size 100 mm (4), novel make, metal: cast iron., rubber lined diaphragm valve size 150 mm (6), novel make, metal: cast iron., neoprene 100 percent pure rubber diaphragm 100 mm, gate valve 150,size 25 mm (1"), complete valve assembly for 40 nb gate valve, gate valve 150 size:50 mm ( 2" ), ccs gate valve class-150 65 nb, cs gate valve 80 nb, cs gate valve 100 mm dia, cs gate valve size 150 mm (6") nb, 150 flanged type, cs gate valve class-150,200 nb (8"), c.i. gate valve 250 mm dia, gate valve size 300 mm nb (12") 7.5 kg/cm2, gate valve class-150,350 mm nb, ci globe valve size 100 nb (4") 150 flang e to flange 292 mm pcd 191, c.i.ball valve size 1" bsp, class 150, internal thread at both end, 50 nb ball valve, gun metal gate valve size 15 mm (1/2"), is-778, class-i, screwed female end., gun metal gate valve size 20 mm (3/4"), is-778, class-i, screwed female end., gun metal gate valve size 25 mm (1"), is-778, class-i, screwed female end., g.m.globe valve size 32 nb, gun metal wheel valve-40mm, gun metal valve 2", gun metal globe valve nb 50, is -778, 450 mm butterfly valve, cs nrv check valve 80nb, ccs swing check non return valve 150,100 nb (nrv), ccs swing check non return valve 150,200 nb (nrv), cs globe valve class-150,200 nb (8"), ss-316, astm a 351 gr. cf8m, ball valve, size: 40mm, 3 piece design, full bore, renewable teflon seat & seal, fitted with ss316 internal working parts, flanged ends, asa- 150 class., ball valve size 1.1/4", ss-316, astm a 351 gr. cf8m, ball valve, size: 25mm, 3 piece design, full bore, renewable teflon seat & seal, fitted with ss316 internal working parts, flanged ends, asa- 150 class., s.s.316 ball valves, size: 15 nb, pressure withstand : 60 kg/cm2, both end threaded., nrv flap 125 nb for dm plant unit-8, ci check valve size 65 mm (nrv), non return valve size 50 mm, globe valve nb20, globe valve 1500,1/2" nb, gate valve size 1 1/4", globe valve 80 mm, cs gate valve class 150,size:125 mm, swing check valve (nrv), size 65 nb with epdm rubber lining for dm plant., ci ball valve size 1/2" bsp,150, internal thread at both end, g m gate valve 40 mm (1.1/2"), butter fly valve 150 nb, swing check valve (nrv) size-450 mm standard-bs 1868 rating-asa 150 body & bonnet-astm a 216 gr wcb disc-wcb+13 percent cr overely trim-aisi 410 operating pr -5 to 8 kg/cm2, cs non return valve (nrv) ,size 350 nb (14") ,class: 150, ss 50 nb gate valve, c.i.globe valve 150nb, flanged type, flange to flange 355 mm, p.c.d.-245 mm with 8 no of holes

Resistance Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government