Latest retainer bolt Tenders | Government retainer bolt Tenders

CTN :41114792

31 Jul, 2025 NA

Tinsukia - Assam

Tender For corrigendum : supply of roller guard nut bolt , grease adaptor for track chain , bucket sim bush , roller guard bolt with nut ex 70 , hydraulic hose iron flexible hose , grease adaptor for track chain ex 70 , bucket sim bush ex 70 , swing motor adoptor , bucket pin with bush jcb 3dx , universal joint , brake valve , main and cr bearing , washer , hydra kit , master cylinder , bty dynex 150r , exide dynex 80ah , exide dynex 1536 bty

State Government

CTN :41225832

02 Aug, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at ram nagar sps. - supply and installation of electrical and mechanical equipment of tubewell at ram nagar sps by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet neoprene rubber 50% synthetic 50% make :- jyoti / national. (1.5 to 2.5 mm) thickness., lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :- dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells/djb approved make., s/o front mounting add on aux contact block. make : havells/l&t/djb approved make., s/o three pole power contractor -25a cap. make l&t/ havells/djb approved make., s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae/djb approved make., s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t/djb approved make., s/o indicating lamp set for ryb phase. make l &t/ havells/djb approved make., s/o single phase preventor. make l&t/ minilac/djb approved make., s/o timer switch digital/anolog type. make l&t / havells/djb approved make., s/o over load relay thermal type 14-23 a. make l &t/ havells/djb approved make., s/o star delta timer on delay. make l&t /havells/djb approved make., s/o sp mcb 6a. make : l&t/havells/djb approved make., s/o 3p mcb 63. make : l&t/havells/djb approved make., push button 22.5mm(red / green) make : l&t/havells/djb approved make., s/o 4p 63 amp elcb make : l&t/havells/djb approved make., changeover switch 63 amp. make : l&t/havells/djb approved make., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t/djb approved make., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national /djb approved make., labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

Central Government/Public Sector

CTN :41224274

11 Aug, 2025 NA

Perambalur - Tamil Nadu

Tender For supply of adapter retainer bolt with lock nut (prevailing torque type ) to rdso drg.no.sk 69594 item no.8, alt.38 or latest. [ warranty period: 30 months after the date of delivery ]

CTN :40855657

28 Jul, 2025 NA

Bathinda - Punjab

Tender For bid to ras supply of stone crusher akona 06 10 tph - ajas 151003048 spring tie rod assy , aj as 151003049 tie rod nut , aj as 151003052 tie rod bolt , aj as 151003050 spring plate , aj as 151003051 spring , ajas 151003053 toggle plate , ajas 151003056 swing jaw plate , ajas 151003063 toggle bearing , ajcw 151002044 fixed jaw plate , ajas 151007112 toggle block bolt with nut , ajed 151005080 v belt flywheel to eng c 215 , ajrs 151004073 v belt screen to flywheel , ajrs 151004075 screen pinion , ajrs 151007113 veg block bolt with nut , ajrs 151004079 bearing ucp 209 , ajed 151005130 clutch plate , ajed 151005129 pressure plate , ajed 151005131 release bearing

CTN :41186105

01 Aug, 2025 NA

Parganas - West Bengal

Tender For tender for supply of nut , plug , retainer , bolt , flat-head screw , spring , valve , exhaust , screw plug , ojde spanner 12x14 mm , spring , elbow , o ring , o ring , seal bearing , ojde spanner 19x22 mm , o ring , o-ring , liner , lower , gasket(fig-1510 by 05) , bolt , key , ring seal , clamp , pin dowel , lock , element filter , gasket , bearing needle , spanner , valve , adaptor , gasket , cable techo hour meter(fig-1045a) , element filter (ctlg fig-61) , strainer , ojde spanner 13x17 mm , spanner 10x11 mm (ojde open end) , spill tube , nut , seat , intake valve , insert , tihckness gauge allen key , 13 mm socket(sl no-g15313) , seat , exhaust valve , insert , seal , rod , spnr ojde 32x36mm , sensor oil pressure switch (fig-2010) , gasket , flange , clamp , clamp , plug , seat , set screw adjusting , hose , wrench hook(sl no-g15313) , gasket(fig no-3105) , fuse box cover , mc piping service kit , regulator & bush box assy , 22 mm socket(sl no-g15313) , o-ring , plate (fig-30) , lock , o ring (ms sl-120) , gauge , level , bolt , 27 mm socket(sl no-g15313) , seal , t handle 290mm , cap , pad rubber( fig no-5005 , sl no-13) , o-ring , seal , rectangular ring , o-ring , seal oil , lever , shaft , pto , bushing , aux diode(ctlg fig-10b) , metal ball(fig-4010 by 11) , lining brake , bushing , retainer , switch bty relay , cover , cyl .head (bd80 eng fig. no. 1150) , cover , body , adapter , tube , tube , wire harness , fuel pump , race inner 8b-5 by 150 , piston ring assy (containing 03 items) , race inner , scraper rh , hose(n743) , regulator (make lucas tvs)(ms) , gasket cyl head , lever , rod , cover , tube , injection no 1 , tube , injection no 2 , tube , injection no 3 , tube , injection no 4 , bearing ball , tube , element assy(fig-1410) , bit end rh (ctlg fig-7006) , tube , race inner , muffler , wire harness , front , shaft (os sl no-80) , plate main clutch (covered 04 plants) , puller 30 ton (ctlg sl-07) , hose , loose spring assy(fig 1015 , sl no-69) , operator seat assy , bracket , speedo meter (fig-12) , pulley , seat operators(ctlg fig-40) , bushing , gear driven 1st(fig-2125) , shaft intermediate , drive tachometer , bushing , gear driven reverse , seal ring assy , bracket lh , shaft , bushing , core assy , bonnet , arm , rocker assy , shifter clutch dog(price list sl-836) , bracket , bearing roller , oil pump assy , pressure spindle , oil cooler assy , fly wheel and rmg gear , starter motor assy self starter , power take off assy , flywheel assy(fig-2210) , frame lh (p-255)

Central Government/Public Sector

CTN :41181235

31 Jul, 2025 NA

Perambalur - Tamil Nadu

Tender For supply of adapter retainer bolt with lock

corporations/Associations/Others

CTN :41133000

04 Aug, 2025 11.73 Lacs

Bangalore - Karnataka

Tender For procurement of fasteners - clutch push rod 1616 bs iv, clutch rod bsi-ii-iii, assy.engine mounting front lh tata midi bs iv, battery cut off switch bsiv, bell housing bolt m12x1.75x60, gear box cover bolt m.d retainer bolt 1 1-2 bsii, rear hub check nut lock bolt with nut bsiv, c j bolt tata with nut 1616 bsiv, shackle lock bolt-nut latest bsii-iii-m12x1.5x70, bolt flange eicher, bedding bolt, gear box cover bolt 2 1-2 bsii, gear bolt cover bolt, side arm bolt m16x1.5x143, return nut, standard flanged bolt hex bsvi, c j self lock nut 1-2 bsii-iii-iv, axle nut 1-2 bsii-iii-iv, rear hub check nut, screw for alternator tensioner egr, flange nut eicher, hub locking nut midi bs iv, coller bolt eicher, fly wheel bolt, gear box bedding bolt m14x2x40 bsii, c.j bolt with nut bsii bsiii -257641113201, bell housing bolt, front center bolt eicher bs iv, b.h. bolt w-nut 3-8 x 1 3-8, axle boltaxle shaft to hub midi bs iv, wheel bolt-26414016703, shackle lock bolt-nuts bsii-iii, fly wheel bolt 1 x 3-8 bsii-iii-iv, bolt, c j bolt w-self nylock nut 1-2 x 5-8 f3531411, fly wheel assembly 697 engine bsiv, side arm bolt, knuckle arm bolt, knuckle arm bolt w-nut m16x1.5x174 bsii-12102296026 , sc washer 6 dia plated, standard nut hex m12 x 1.5 fp x 1, standard screw hex m12 x 1.5 fp x, screw m6 x 20 x 1 cp plated

CTN :41115683

01 Aug, 2025 NA

Lower Dibang Valley - Arunachal Pradesh

Tender For supply of spare parts for akona stone crusher 6 10 tph d d - fly wheel pulley akona part no. aj-rs-1510-04-074 , screen pulley akona part no. aj-rs-1510-04-071 , toggle plate akona part no. aj-as-1510-03-053 , viz block bolt nut akona part no. aj-cw-1510-02-039 , toggle block bolt nut akona part no. aj-cw-1510-02- 040 , jaw plate block akona part no. aj-as-1510-03- 062 , screen pinion 12 teeth akona part no. aj-rs- 1510-04-075 , v-belt screen to fly wheel c-150 akona part no. aj-rs-1510-04-073 , v- belt fly wheel to engine c-215 akona part no. aj-ed-1510-05-080 , fix jaw plate mounting bolt nut akona part no. aj-mf- 1510-07-114 , swing jaw plate nut bolt akona part no. aj-mf-1510-07-115 , pressure plate akona part no. aj-ed-1510-05-129 , clutch plate 55 mm akona part no. aj-ed-1510-05-130 , spring akona part no. aj-as- 1510-03-051 , tie rod bolt akona part no. aj-as-1510- 03-052 ) /bid number : gem/2025/b/6461569 * /dated: 17-07-2025 & & / bid document 1 / 14

CTN :41101150

06 Aug, 2025 NA

Ernakulam - Kerala

Tender For custom bid for services - defect rectification of acsr 2 (south tower)-defect., in has reported that tracks are not available on display of acsr #2., defect identification., di for the same was undertaken on 13 jun 2025. it was found that the pedestal unit, was required to be replaced to rectify the defect., scope of work to undertake defect rectification., 1. spare part., the required pedestal unit for replacement will be provisioned by in on site. all other, components/ units of acsr #2 should be in place to operationalize the system., 2. manpower., three skilled technicians will be required to undertake the pedestal replacement work., one tower climber also needs to be available on site. the tower climber and two, technicians will be provisioned by hela., 3. material/ machinery., one overhead crane with a loading capacity of one ton lifting to a height of 35 mtrs is, required to undertake the work. the same will be provisioned by in., 4. tools and accessory., the following are required and will be provisioned by hela:-, (a) torque wrench, (b) level indicator, (c) eye hook -02, (d) two 50 mtrs rope, (e) silicon, (f) drill machine, (g) lubricant, (h) slings for lifting, 5. activity to be undertaken., the sequence of events for replacement of pedestal unit will be as tollows:-, (a) disconnect and remove all cables, wave guide ard units from the antennae assembly., (b) fitment of lifting eye hook on antenna and pass lifting slings to the eye hook. dismantle antenna from pedestal unit and keep it on even surface on, the ground with the help of overhead crane. special care is o be undertaken while handling waveguide., (c) hook on the pedestal unit on overhead crane and op an securing bolts, of pedestal unit. lift the pedestal and move to the ground with cap closed of all connectors., (d) hook up new pedestal and lift it to the tower top and w hen aligned with, the position of pedestal plate lower the pedestal on the plate and tight the nut, bolt with level indicator on top of the pedestal to confirm tht the same is at, zero level., (e) lift the antenna to the top of tower and fix it to the pede stal unit., (f) install all units of acsr on top of tower and fix connectors and waveguide to the antenna., (g) switch on power and carry out power checks and fo (hecks., (h) switch on the acsr server and carry out alignment of system to get the tracks appeared on the display., 6. safety., all man working on tower should wear safety belt, safety helmet and safety belt to be, tied on two rigid point at tower top. the man below tower for handlin activity should, wear helmet. the antennae assembly and pedestal unit should be se cured with twopoint safety rope while lifting and lowering the same to avoid any dan age to the man, and material view heavy wind, lifting jerk or swing of the crane sling., .

Retainer Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others