Get complete information related to latest Retainer Sleeve Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Retainer Sleeve Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Retainer Sleeve Tenders.
Tender For supply of toughened & heat resistance sight glass, crusher nut bolt & crusher sleeve for bottom ash system of ash plant at gtps. - sight glass 222 odx10 mm thick for hopper (big) unit no 3/4 b/ash, sight glass 212 od x 18 mm thick for bottom ash hopper unit 5, sight glass 125od x 12mm thickness for bottom ash system, ss-304 square head bolt with nut, lock nut and washer size: m 20x65, revised shaft sleeve for clinker crusher of ash plant stage ii and iii as per drawing no.gtps/ash/001140, sight glass 222 odx10 mm thick for hopper (big) unit no 3/4 b/ash, sight glass 212 od x 18 mm thick for bottom ash hopper unit 5, sight glass 125od x 12mm thickness for bottom ash system, ss-304 square head bolt with nut, lock nut and washer size: m 20x65, revised shaft sleeve for clinker crusher of ash plant stage ii and iii as per drawing no.gtps/ash/001140
Tender For corrigendum : supply of forged rings nuts and bar - fp9512050005 thrust collar nut od270 id150xl100 , fp9512050048 fo od270 id150xt30 lock nut for tc nut , fp9582050020 nut thr r m c forged ring dia240 130x100 , fp9750629019 forged ring od190 id135 l 20 aa19321 , fp9750629035 forged ring od420 id290 l 80 aa19321 , fp9750629043 forged ring od225 id150 l 60 aa19322 , fp9750629051 forged ring od230 id150 l 150 aa19322 , fp9750629310 forged ring od240 id160 l 80 aa19322 , fp9750629329 forged ring od175 id120 l 56 aa19321 , fp9750629337 forged ring od170 id130 l 20 aa19321 , fp9750629345 forged ring od184 id140 l 145 aa19322 , fp9750629400 forged ring od515 id390 l 85 aa19321 , fp9750629469 forged ring od290 id120 l 190 hy19363 , fp9750629477 forged ring od290 id120 l 360 hy19363 , fp9750639286 cvp shaft sleeve , fp9750639294 shaft sleeveretainer , fp9750677048 forged bar od105xl590 var no 04 , fp9750714016 duplex ss forged ring od185 id85xl350
Tender For centralized rate contract for two (02) years of spares of sam turbo make pumps installed in ash handling plant of dvc - impeller with screw & hub cap : part no : -18 & 38, 58 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), fasteners set (total quantity of fasteners applicable for one bare ba overflow transfer pump, model : arl 200/410 ) : part no : -na : material: - ms / hts, lock washer (p.end) : part no : -63 : material: - is 1363 ms, piston ring : part no : -51 : material: - is 210 fg 200, key (coupling) : part no : -32 : material: - bs 970 en 8, laybrinth (drive end) : part no : -24 c : material: - astm a 216 gr wcb, coupling set [od 280 mm] : part no : -na : material: - is 210 fg 200, base with top cover : part no : -1 & 2 : material: - is 210 fg 200, volute casing : part no : -17 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), lock nut (p.end) : part no : -60 : material: - is 2062 c 15, grease nipple : part no : -48 : material: - steel, lock washer : part no : -47 a : material: - is 1363 ms, check nut : part no : -47 : material: - astm a 216 gr.wcb, key (shaft sleeve / impeller) : part no : -31 : material: - aisi 304, bracket side cover : part no : -25 : material: - astm a 216 gr wcb, laybrinth (pump end) : part no : -24 : material: - astm a 743 cf8, shaft sleeve : part no : -12 : material: - aisi 410 (h), gland : part no : -10 : material: - astm a 216 gr.wcb, grease retainer : part no : -7 : material: - is 210 fg 200, wear plate (b.side) : part no : -16 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), pump shaft with keys : part no : -4 : material: - bs 970 en 8, lantern ring : part no : -13 : material: - aisi 410, gland housing : part no : -9 : material: - alloy ci (290 - 320 bhn), end cover : part no : -5 : material: - is 210 fg 200, ba overflow transfer pump complete without motor, model-arl 200/410, earlier pump sl.no.-16804-16805, head:20mwc, capacity: 320 cubic meter/hr., size:200x200., o ring set (1 set=8nos.), for ba overflow transfer pp, model of pump-arl 200/410, shaft sleeve : part no : 53.6 : material : aisi 410, impeller with nut & helicoil insert : part no : 24.2 : material : is 318 gr.i, bearing housing lantern : part no : 35.6 : material : is 210 fg 200, bearing bed : part no : 36.7 : material : is 210 fg 200, bearing cap(outer) : part no : 37.2 : material : is 210 fg 200, bearing cap(inner) : part no : 37.3 : material : is 210 fg 200, oil seal set (1set = 2 nos) : part no : 43.13 & 43.3 : material : syn. rubber, impeller nut with helicoil insert : part no : 93.4 & 94.21 : material : aisi-316, wear ring (casing) : part no : 51.4 : material : is 318 gr.ii, wear ring (casing cover) : part no : 51.23 : material : is 318 gr.ii, key(coupling) : part no : 95.2 : material : bs 970 en8, circlip : part no : 94.23 : material : spring steel, grooved nut & lock washer : part no : 93.3 & 94.03 : material : sae 1018/1020 is 513 crca sheet, gland : part no : 46.4 : material : is 210 fg 260, pressure ring : part no : 46.9 : material : aisi 410, lantern ring : part no : 46.10 : material : aisi 410, gland packing set (1set = 4 nos) : part no : 47.3 : material : tiga, fastners set [total quantity of fastners applicable for one bare ash conditioner water pump, model : cpc 80/400 ] : part no : na : material : ss, key(impeller) : part no : 95.03 : material : aisi-316, key (sleeve) : part no : na : material : aisi-316, gasket set (1set = 4 nos) : part no : na : material : caf-9/ paper oil resist, volute casing : part no : 11.4 : material : is 210 fg 260, pump shaft with keys : part no : 22.3 : material : bs 970 en8, disc (impeller) : part no:550 : material :-ansi-316, gland : part no:452 : material :-astm a 743 gr.wcb, lantern ring : part no:458 : material :-aisi 410, key (impeller / shaft) : part no:940.01 : material :-aisi 316, lock washer : part no:931 : material :-sae 1018/1020, bearing cover (n.d.e) : part no:360.01 : material :-ast
Tender For tender for supply of mt sapares d d - hose connection cqa hv 5 31 020 , electro pneumatic valve , head lamp f8043900 , pump hydraulic ram hand driven , clutch cyl repair kit , sleeve cylinder repair kit minor , door lock assy lh , door lock assy rh , poly v belt , pipe intake turbo charger engine non air , propeller shaft bolt , air pressure governor , control valve 9730010200 , water pump , retainersleeve seal , c a battery inter connector , assy hose , cable assy control , motor engine starter electrical , alternator 60a 28v , dust cover , cover timing belt outside
Tender For invitation quotation for data rates of electrical items for bbmp (quotation tender for data rate) - supplying, installing, testing and commissioning of diesel generator set with following specifications. power rating as per standard reference condition as per-bs 5514/iso 3046/ iso 8528 & is 1002/iso 3046 generator set specifications.160 kva / 128 kw, supplying & fixing of 30 mtr highmast accessories that include winch plate, 350 kg winch, ss wire rope 65 mtr length, moulded cable 4sqmmx3 core 40 mtr length, d clamp tumble, crane charges, labour charges for data rate, supplying & fixing of 20 mtr highmast accessories that include winch plate, 350 kg winch, ss wire rope 65 mtr length, moulded cable 4sqmmx3 core 30 mtr length, d clamp tumble,crane charges, labour charges for data rate, supplying & fixing of 16 mtr highmast accessories that include winch plate, 350 kg winch, ss wire rope 65 mtr length, moulded cable 4sqmmx3 core 30 mtr length, d clamp tumble,crane charges, labour charges for data rate, supplying & fixing of 12 mtr highmast accessories that include winch plate, 250 kg winch, ss wire rope 50 mtr length, moulded cable 4sqmmx3 core 20 mtr length, d clamp tumble,crane charges, labour charges for data rate, supply and fixing of vertical furnace coil holding bricks (240 x 300 x 80mm) made out of refractory material to with stand a temperature of 1000 c using required refractory cement and other binding material to form into required shape (as per bis-8) complete, supply and fixing of vertical heating element suitable to operate on 220 volts 50hz (4.5 kw capacity of heating element) element shall be made out of 8 swg 25mm dia 6 mm pitch total length 3100 mm superior quality nichrome wire coil and shall be capped with fiberglass tube. new element shall be fixed in furnace heating slots using necessary labour consumable and terminated with end bolts etc complete., supply and replacement of smoke exhaust motor fan shaft fabricated out of ss310 dia 50mm x 780mm length with balancing impler 2nos key slot of 10 x 10mm with computer balancing impler-380mm dia,160mm width, 3mm sheet fabricated(ss304), supply & erection of b-58 belt(), supply & erection of 311h sleeve (adapter)(), hire charges for supply, fixing, wiring, servicing & maintaining of 200 watts led type flood light fitting with accessories. upto 3 days, supply & erection of 22211ck bearing (for exhaust motor )(), providing door lifting mechanism set for manually operating made out by 2 bearings 30mm dia and 50mm dia bore shaft and 40 x40x100mm shifting block with handle and mounting bracket., supply & erection of 2 wire temperature controller range 0 to 1200.c of size 99 x 99mm,, supply & erection of ss310 pipe thermocouple 19 mmod & 700mm length, simplex, supply & erection of smoke exhaust motor 7.5 hp 3 phase, 50hz,1500rpm, induction motor, with table lock pully 180 dia, 2 nos grove, make abb/kirloskar/suguna or equalent, supply & erection of 1hp single phase 50hz water pump (open well submersibal pump set)(), supply & erection 2hp 3phase, 50hz, 1440 rpm induction flange mounted water pump for scrubber, inlet 2 inch, outlet 1 and off inchinch, supply & erection of 1/2hp 3phase 50hz, 1440rpm flange mounting motor with gear output 10rpm with grounting frame, complete including loading, unloading and transportation to work site spare.(), furnace main door servicing include of bearing replacement 2 nos and door lifting chain replacement(), servicing & cleaning of scrubber, tank,scrubber duct,exhaust blower, exhaust duct furnace to chimny and cleaning of chimny (6 monts once)(), hire charges for supply, fixing, wiring, servicing & maintaining of 150 watts led type flood light fitting with accessories upto one month, providing servicing, repairing and overhauling of existing body charging trolley complete.(), supplying & fixing of epoxy of epoxy insulators (bus bar mounting, supplying & fixing
Tender For supply of centrifugal machine spare parts in sugar unit - air filter element for centrifugal machine (small). isi/iso standard, air filter element for centrifugal machine (medium). isi/iso standard, air filter element for centrifugal machine (big). isi/iso standard, s.s. nozzle for centrifugal machine as per sample. isi/iso standard, teflon elbow as per sample. isi/iso standard, teflon nipple as per sample. isi/iso standard, teflon tee as per sample. isi/iso standard, brass elbow for centrifugal machine, size: . isi/iso standard, break liner, size: x 6 isi/iso standard, solenoid valve schrader below max. 10 bar air part no. g-53214 isi/iso standard, spare kit for above solenoid valve. isi/iso standard, air filter complete set connection. isi/iso standard, brake spring as per sample. isi/iso standard, s.s. clit for nk-1100 c/f machine. hole dia 10 mm. isi/iso standard, discharge cone strip for 1 ton c/f machine . isi/iso standard, gate valve rubber sheet as per sample. isi/iso standard, rotary distributor for c/f machine. isi/iso standard, epdm rubber seat switable for 300mm. butter fly valve isi/iso standard, teflon pipe 10mm. for centrifugal machine as per sample. isi/iso standard, teflon sheet, thick-2mm., width-1 mtr., length-1 mtr. isi/iso standard, teflon rod size:2 isi/iso standard, teflon rod size: 1, . isi/iso standard, solenoid valve single way , make-seetz rotex, type-crg-300 , pr. 7 kg/cm . isi/iso standard, solenoid valve double way , make-seetz rotex, type-cr-300 , pr. 7 kg/cm isi/iso standard , air filter for ng-700 centrifugal machine pressure- 10kgs/cm . isi/iso standard, s.s. nozzle with connector for ng-700 centrifugal machine, as per sample. isi/iso standard, s.s. nozzle size: 3/8 with connector for centrifugal machine, as per sample. isi/iso standard, s.s. socket size: 3/8 , as per sample. isi/iso standard, s.s. nozzle with connector for ng-700 batch type c/f machine. isi/iso standard, brass nozzle with connector for ng-700 batch type c/f machine. isi/iso standard, m.s. socket , as per sample. isi/iso standard, s.s. nozzle with elbow for one tone batch type c/f machine., as per sample. isi/iso standard, m.s. elbow , as per sample. isi/iso standard, quick adjustable valve, size: for ng-700 c/f machine. isi/iso standard, rubber o ring, size: 386 x 380 x 3 mm. for nk-1100 c/f machine. isi/iso standard, bearing housing shaft (forged steel) for nk-1100 nhec make centrifugal machine. isi/iso standard, bearing housing for nk-1100 nhec make centrifugal machine. isi/iso standard, grease cup of bearing housing for nk-1100 centrifugal machine. isi/iso standard, s.s. clit/clamp for nk-1100 centrifugal machine basket, hole size: 8 mm., as per drawing/sample. isi/iso standard, s.s. clit/clamp for dc-10 centrifugal machine basket, hole size: 10 mm., as per drawing/sample. isi/iso standard, brass bearing distance piece for bearing housing nk-1300 centrifugal machine. size: od:160 mm., bore: 98 mm., thick: 10 mm. as per drawing/sample. isi/iso standard, epdm rubber seat switable for 300mm. flap valve isi/iso standard, pneamatic actutor cylinder for 300mm. butter fly valve isi/iso standard, s.s. plough (scraper) for n.g. 700 centrifugal machine si/iso standard, bearing sleeve (m.s.) for bearing housing n.g.centrifugal machine as existing size, supply include satishfactory trial of ms basket with ss spider (arms), shaft & bearing sleeve for n.g.centrifugal machine.
Tender For spares for ksb and kec make boiler feed pump - spares for ksb make boiler feed pump model wl65/11 hwd s. no. 9411740/751, spare shaft with key material ss-410, gasket for bearing housing, o-ring casing, o-ring sp sleeve, gland packing, ss bush for suction side, bearing nu207 with sleeve, spares for ksb make boiler feed pump model wl65/11 (n), s. no. 010379, spare shaft with key material ss-410, ss sleeve, ss bush for suction side, gasket for casing, spare for kec make boiler feed water transfer pump type rkb-50/15 l-3, head 70 meters, ci imprller, ci diffuser, ss sleeve, ss shaft (ss-410), bearing housing de, bearing housing nde, o-ring for casing
Tender For corrigendum : supply of ste on pac basis for procurement of spares for pumpsense make pump model 6hstd21 ss - impeller part no. 3171020m , shaft cw part no. 3171530 , bearing bracket d.e part no. 3172540 , bearing bracket n.d.e part no. 3172710 , casing wear ring part no. 3171290 , impeller key part no. 3171370 , shaft sleeve part no. 3171500 , sleeve nut part no. 3171460a , split gland part no. 3171440 , lantern ring part no. 3171490 , stuffing box bush part no. 3172600 , inter stage bush part no. 3173000 , inter stage sleeve part no. 3173010 , thrust sleeve part no. 3171250 , water thrower part no. 3171450 , bearing end cover d.e and n.d.e inner part no. 317277060 ) /bid number : gem/2025/b/6395289 * /dated: 04-07-2025 & & / bid document 1 / 18