Latest ribbon cable Tenders | Government ribbon cable Tenders

CTN :44379367

23 Mar, 2026 9.99 Lacs

Khurda - Odisha

Tender For corrigendum : supply of brackets 10 ltr capacity, flushing cistern si18316 , health faucet , india rubber washers for pillar taps, bip taps etc 20mm dia and under , india rubber washers for pillar taps, bip taps etc exc 20mm dia but not exc 32mm , 0. 50 inch float valve , 0. 75 inch float valve , 1 inch float valve , 0. 50 inch gate valve, stop valves, castcopper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , 0. 75 inch gate valve , 1 inch gate valve , stainless steel wire cloth 0. 36mm normal dia of wire and average width of aperture 1. 40mm and fixed with stainless steel wire staples, width 4ft , second class hard filletes not exc. 3 sq cm , 2 inch isi, ms hinges heavy weight, butt hinges, heavy weight, cold rolled mild steel, and fixed , 3 inch i. s. i, ms hinges heavy weight butt hinges heavy weight, cold rolled mild steel, and fixed , 4 inch i. s. i, ms hinges heavy weight butt hinges, heavy weight, cold rolled mild steel, and fixed , 5 inch i. s. i, ms hinges heavy weight butt hinges, heavy weight, cold rolled mild steel, and fixed , aluminium handles 4 inch aluminium handles, cast type, anodised , aluminium handles 5 inch , aluminium handles 6 inch , aluminium tower bolt 4 inch, aluminium anodised, barrel tower bolts of extruded section and fixed , aluminium tower bolt 6 inch , aluminium tower bolt 8 inch , aluminium tower bolt 10 inch , aluminium tower bolt 12 inch , aluminium sliding bolt 8 inch, aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, or cast aluminium alloy and fixed , aluminium sliding bolt 10 inch , aluminium sliding bolt 12 inch , stainless steel sink with draining board, made out of 1. 00mm thick sheet for kitchen with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 600mmx450mmx60mm , looking mirror fancy type frameless 18x24 inch , hdpe water tank covers , waste pipe 32mm dia low density wiring presure rafing 4 kg sqm with polythene union and check netts 75cm long , lp stop cock, conceal fancy type , curtain rod fancy, decorative type with brackets and knobs 2 nos , flush sistern ball cock , flush tank liver, flush handle , siphon washer , comod bend pipe washer , 1. 25 inch wash basin waste pipe pvc , 1. 25 inch sink waste pipe pvc , urinal waste pipe , spendal for tap, no of spendal 1, 2, 2, 4 , spendal washer for tap , 1 inch upvc tank niple , 1 inch upvc plug 15 mm , upvc solvent , m seal , teplon tape , white cement , mirror screw and plug , connection pipe washer , buttom washer , ewc sheet cover clamp , 0. 50 inch x 0. 50 inch upvc brass elbow , gi nipple half inch length 50mm isi marked , plumbing tape, teflon tape, half inch , plumbing tape teflon tape 0. 75 inch , gi nipple hlaf inch length 75mm isi marked , gi nipple half inch length 100mm isi marked , gi nipple 1 inch length 50 mm isi marked , gi nipple 1 inch length 75 mm isi marked , gi nipple 1 inch length 100 mm isi marked , gi nipple 0. 75 inch length 50mm isi marked , gi nipple 0. 75 inch length 75mm isi marked , gi nipple 0. 75 inch length 100mm isi marked , gi elbow hlaf inch i. s. i mark with heavy grade , gi elbow 0. 75 inch i. s. i mark with heavy grade , gi elbow 1 inch i. s. i //bid details2 / 72mark with heavy grade , 0. 50 inch gi socket isi marked , 0. 75 inch gi socket isi marked , 1 inch gi socket isi marked , 0. 50 inch gi tee isi marked , 0. 75 inch gi tee isi marked , 1 inch gi tee isi marked , 0. 75 inch by 0. 50 inch elbow gi reducer , 1 inch by 0. 75 elbow gi reducer isi marked , half inch gi tube medium grade tata, jindal , 0. 75 inch gi tube medium grade tata, jindal , 1 inch gi tube medium grade tata, jindal , half inch gi union isi marked , 0. 75 inch gi union isi marked , 1 inch gi union isi marked , gi hooks for fixing of gi tube , nails 1 inch , nails 1. 50 inch , nails 2 inch , nails 2. 50 inch , nails 3 inch , mild steel wire annealed not less

CTN :44512512

27 Mar, 2026 NA

Nagpur - Maharashtra

Tender For supply of aluminium wire 9mm dia with minimum purity 99.6% , in coiled form and in annealed condition. weight of

Central Government/Public Sector

CTN :44538851

28 Mar, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of wire dia 1.219 mm - gi - is280 , wire dia 0.711 mm - gi - is280 , 16 swg soft annealed gi wire

Central Government / Public Sector

CTN :44536436

08 Apr, 2026 NA

Guntur - Andhra Pradesh

Tender For corrigendum : supply of stranded annealed copper jumper wire

CTN :44452258

28 Mar, 2026 NA

Pratapgarh-Up - Uttar Pradesh

Tender For supply of relaya cut out relays reversecurrentcovercurrentd under voltage , insulators including hardware fitting , tower ladder on type wheels , portable extension ladder , trowel , miniature circuit breaker mcb , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , earth plate , earth electrode , mccb , elcb and rccb , capacitors , various electronic components , various lamps with fittings , all types of cfl lamp led sets , cables twisted pair non metallic sheathed cable underground feeder cable ribbon cable metallic sheathed cable , cable jointing kit , bus bar with brackets , electrician helmet , safety belt with provision forkeeping tools , panel accessories , wiring accessories including modular industrial switchgears , solar street light , solar traffic light , solar dc pump , rechargeable battery , led lights , solar panels , solar charge controller with manual switch day lighting , ev charger , ev charger home , motion detector , dc power supply , automatic reverse forward starter , single phasing preventer , dol starter , soft starter , lead acid battery 75ah , battery charger , solar street light lamp set , field regulator , transformer single phase , dc compound motor , dc shunt motor , dc series motor , mg set consisting of squirrel cage induction motor 5 hp 400 v cycle with directly coupled compound generator 3 kw 250 v , cctv camera kit , personal computer system with printer , lcd led projector , domestic appliances , a electric induction plate , b electric kettle , electric iron , d immersion heater , e ac ceiling fan and actable fan , f geyser storage type , g mixture grinder , h washing machine semi automatic , i motor pump set , j refrigerator , control panel , working bench , demonstration table , instructors chair , computer chair revolving , metal rack , almirah , fire extinguiser co2 , dual desk , computer table , revolving chair for computer , computer latest model , printer table , book case , ups , lcd projector , antivirus , steel almirah , multi feature photocopier , application software ms office education version , laser printer

Central Government/Public Sector

CTN :44420354

01 Apr, 2026 NA

Nashik - Maharashtra

Tender For supply of emery cloth belt size 915 x 100mm grit 100 , emery cloth belt size 915 x 100mm grit 80 , emery cloth belt size 915 x 100mm grit 150 , emery disc size 180 x 22.23mm grit 60 , aluminium oxide resin industrial cloth mops with spindle dia 6mm size dia 25 mm x width 30 mm grit 80 , aluminium oxide resin industrial cloth mops with spindle dia 6mm size dia 25 mm x width 30 mm grit 100 , aluminium oxide resin industrial cloth mop with spindle dia 6 mm size dia 40 mm x width 25 grit 100 , aluminium oxide resin industrial cloth mop with spindle dia 6 mm size dia 60 mm x width 40 mm grit 120 , wire aluminium 16 swg annealed , emery cloth abrasive coated confm to is 715 280x230mm or 297 x 210mm grit 50 , emery cloth size 280 x 230 mm or 297 x 210 mm grit 120 , emery cloth size 280 x 230mm or 297 x 210mm grit 150 , emery cloth size 280 x 230mm or 297 x 210mm grit 220 , aloxite cloth roll size 50mm x 50mtrs grit 180 , rubber hose air pressure size id 10 mm 0d 19 mm plus minus 1 mm working pressure 10 kgbycm2 conferming to is 446 type 2 roll of 50 mtrs ) /bid number : gem/2026/b/7346643 * /dated: 11-03-2026 & & / bid document 1 / 21

Central Government/Public Sector

CTN :44440483

20 Mar, 2026 NA

Hubli - Karnataka

Tender For supply of 50 sq.mm annealed stranded copper jumper wire as per rdso specification no. ti/spc/ohe/jmp/0941 or latest.

Central Government/Public Sector

CTN :44399844

23 Mar, 2026 NA

Kota - Rajasthan

Tender For supply of 160 sq.mm. annealed copper stranded jumper wire for electric traction as per rdso specification: ti/spc/ohe/jmp/0941..note-item reserved for rdso approved source with item id-3100640 & sub item id: 3100640002

Central Government/Public Sector

CTN :43698963

17 Mar, 2026 2.99 Crore

Poonch - Jammu And Kashmir

Tender For corrigendum : provn of dry ration stores under ge 881 ews - sch a part-i (building work):-this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., construction of block of storage shed complete all as shown on drawings and as specified., total amount of sch a part - ii (site clearance/development work), total amount of sch a part - iii (internal electric supply work), total amount of sch a part - iv (protective work), total amount of sch a part - v (area drainage work), total amount of sch a part -vi (road, path and culvert work), total amount of sch a part -vii (external electric supply work), total amount of sch a part -viii (demolition/dismantling work), sch a part - ix (misc items of work) note : this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., double walled corrugated (dwc) pipe for cable protection with outer dia 50mm and inner dia 38mm including suitable size of coupler for connection of pipe complete all as specified and directed., point wiring for one light/fan point/call bell point controlled by one way switch 5 amp with 1.5 sqmm single core multi standed copper conductor frlsh insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor frlsh insulated, drawn into and including concealed in pvc conduit of not less than 20mm dia and 1.5mm wall thickness (isi marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on same board., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on independent board., earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia gi light grade protection pipe, 20mm dia gi medium grade watering pipe with funnel including charcoal, dust, salt, pcc m-15 type b1 in pit with angle iron (25x25x3)mm frame work with precast rcc 1:2:4 type b-1 cover reinforced with 8mm dia tmt bars @ 150mm c/c both ways and 12mm dia ms fabricated handle, test point etc. in and including light grade gi protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate no. 3 of ssr part-i complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.note:- on testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction., inverter led light fittings batten type, 1x20w led, 230v, complete with all accessories internally per wired including lithium lon battery with charging time 8 to 10 hours and back up time up to 4 hours and connecting up with pvc insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed., led street light/ security light fitting 35 watt, 230 v, ac, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 66 protection, including provision of gi bracket made of 40mm dia, gi pipe, 1.5m long, bend to shape, complete all as specified., mcb, spn, 240 volts, 40 to 63 amps,10ka, breaking capacity, complete all as specified., mcb, spn, 240 volts, 6 to 32 amps,10ka, brea

Central Government/Public Sector

CTN :44246972

16 Mar, 2026 13.01 Lacs

Ranga Reddy-T - Telangana

Tender For corrigendum : tender for supply of procurement of raw materials c c -brass round hal std 1301 , is 319 , type-1 1/2hard , dia 4mm x 2 to 3 meters length , half finished brass material tube dia 4 x 0.5 of 1000mm hal std 1307/is407-81 grade cuzn37 , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th. 0.2 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th.0.4 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , rivetting quality brass wire conf.hal std 1303 , is 4413-cuzn-37 annealed condition dia 4mm , bare copper wire , condition annealed , conforming to hal std 6054 grade b / is 8130 / bs 128 / astm b-3 , size dia 0.5 mm in spools. , alluminium alloy sheet , hal std 1252-1/2h , confirming to is gr 31000(ns3) is 737 en 573-3-3003 or 3013 , dh bs 1470 - 3103 h-14 (ns-3) -1/2h (h4) , size thickness 1.0 x 1000 x 2000 mm with pvc coating on both sides. , glass epoxy laminated sheet , conforming to hal std 1807 , nemali -1- 98 , gr fr4 / bsen 60893 - 3- 2 epgc 202 / bs 3953 type ep4 / mil - 1 - 24768 / 27 type gee - f(fr4) size thickness 1.5 mm x 1220 mm x 1220 mm. , copper claded glass epoxy laminates conf. to ipc-4101 b/26 with tg greater than or equal to 170 degree c with 1 oz copper on both sides size thickness 1.6mm x 36 inch x 48 inch . , glass epoxy laminate sheet conforming to hal std 1807 bs 3953-1990 grade ep3 (or) ep4 (or) bsen 60893-3-2 epgc 202 size thickness 0.5 x 1000 x 1000 mm. , pure silver wire 99.9 percent (minimum plus 0.01-0.04) , conforming to hal std 1356 size dia 3 mm or as per is 12144-1987 , glass filled phenolic moulding powder as per amity 16 / amity 157/ hal std 1757/is std 1300 , grade pf2 d4 , type d , filler glass fiber , glass natural colour , bimetal clad strip-grade 223-80 confirming to astm-b-388 size 0.4 x 25mm , hes fe-ni22-cr3 les fe-ni36

Ribbon Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector