Latest rig boring machine Tenders | Government rig boring machine Tenders

Central Government And Public Sector

CTN :40957239

06 Aug, 2025 NA

Bengaluru - Karnataka

Tender For supply of boring head cartridges except c.c.inserts as per the revised drawing no. c/ tl-1/33 sheet 1 alt'i' with sl no.1 for dimension 'a'in the table ]

Corporations And Associations And Others

CTN :40937103

11 Jul, 2025 9.46 Lacs

Ghazipur - Uttar Pradesh

Tender For :provision of water facility at slf bhalswa - boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. all type of soil (350 mm dia), boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. rocky strata including boulders-350mm, gravel packing in tubewell construction in accordance with is:4097, including providing gravel fine/medium/coarse, in required grading & sizes as per actual requirement, all complete as per direction of engineer-in-charge., development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as reqd. the development shall be considered complete when gravel stop sinking, discharge ceased to improve and the sand contents are not more than 10 ppm after 20 minutes of starting the pump complete as reqd., providing, lowering and fixing/placing in vertical position ms black casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required. (b) 150 mm dia (nominal bore), providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell. (a) 200 mm dia., supply, lowering and fixing following size of g.i. pipe (m-class) i/c cutting threading on both sides etc. isi marked etc as reqd. (d). 50mm(nominal bore), s & f following size of g.i. elbow. as reqd. (d). 50mm, s & f ms clamp made up of iron flat of size 50x6 mm with 4 nut bolt for holding the gi pipe as reqd. (b) 50 mm., providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) : 50 mm nominal bore, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (e) three phase 7.5 hp having discharge of 480 lpm approx. at 48 m head., s&f following size of g.i.socket as required. 50mm, s&f following size of g.i.union as required. 50mm, p&f following sizes of pvc insulated & pvc sheathed copper conductor 3 core submersible cable confirming to is.694/1990 etc. as reqd. (b) 3x 4 sq.mm., supply of cubical type control panel board for three phase star delta starter, three position selection with auto switch for submersible pumping set of following rating complete with single phasing preventer in auto, contactor (25amp), 0/l relay tp, mcb, voltmeter, ammeter, vss and indication lamp etc. including lamp etc. including connection etc. as required. (a) 10 h.p. rating submersible pump set over load relay (range13-21 amp) & contactor (range 25 amp)., supplying and fixing following sizes of steel flexible safety rope for holding s

Central Government/Public Sector

CTN :40931195

23 Jul, 2025 NA

Firozpur - Punjab

Tender For electrical work in c/w provision of rubberized level crossing at 27 nos existing level crossings in the jurisdiction of sr.den-i/fzr and electrical work in c/w provision of 01 nos. 100 kl rcc oh water tank at gna & 1 no at 225 kl at fzr in lieu of old abandoned steel oh water storage tank with plumbing pipes with pump house, bore & pump and electrical work in c/w provision of 5 nos new smc over head tank of 100kl capacity each at bxb, lnk, mqs, ghs & jbd stations and provision of boring & pump house etc and electrical work c/w replacement of rcc tank of 2,25,000 liters capacity including pump house and improvement to drainage system in colony no. 1, 2, 3 & 4 at firozpur.

corporations/Associations/Others

CTN :39701808

07 Jul, 2025 10

Bengaluru - Karnataka

Tender For corrigendum : supply, installation and commissioning of universal sheet metal nibbling machine, vertical band saw machine, cylinder head pressure testing machine, cylinder head seat & guide machine, vertical boring machine, vertical honing machine & 3 ton capacity diesel fork lifter on turnkey basis.

CTN :40752358

07 Jul, 2025 NA

Ishapore - West Bengal

Tender For corrigendum : supply of 150 mm counter boring bta head suitable for dia 142 mm bta tube having external single start bta thr

CTN :40870278

18 Jul, 2025 NA

Ahmedabad - Gujarat

Tender For supply of dia 2 mm 4 flute solid carbide endmill , dia 3 mm 4 flute solid carbide endmill , dia 4 mm 4 flute solid carbide endmill , dia 8 mm 4 flute solid carbide endmill , dia 10 mm 4 flute solid carbide endmill , dia. 12 mmsolid carbide endmill-5flute , dia.16 mm solid carbide endmill 5flute , 6 mm boring bar_tcmt 06_rh , suitable tcmt 06 inserts re_ 0.4 , 8 mm boring bar_tcmt 06_rh , suitable tcmt 06 inserts re_08 , 10 m boring bar _ccmth , ccmt 06 insert re_0.4 _s s , mm boring bar _ccmt06_rh , ccmt 06 insert re_0.4 _s.5 , 16 mm boring bar _ ccmt 09_rh , suitable ccmt 09 inserts re_0.4 , dia.10 indexable endmill x 100_shanl _9mm , dia.12 indexable endmlll x 120_shank _10mm , suitable inserts re_0.8 , dia.9.6 mm eh shank _80mm , dia.10 mm endmill head , dia.12 mm eh shank , dia.12 mm endmill head , dia 6 mm 4 flute solid carbide endmill

CTN :40843563

16 Jul, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of brake pipe 1 mtr , indicator assy front , stick light , window glass regulator , gear lever knob , hand brake assy , head light , indicator assy , clutch switch , wiper blade , mud flap , knuckle bush brg , bolt with nut , switch backup lamp , gear lever kit , oil pump assy , piston with ring set , piston boring , high pressure pipe

CTN :40794072

04 Jul, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of rough boring head for dia range 36mm-50mm for heat resistant alloy as per tungaloy code or similar

CTN :40768253

10 Jul, 2025 NA

Tiruvallur - Tamil Nadu

Tender For supply of pads pressure for t-max counter boring head 430- 21-12 dia 70mm

Central Government/Public Sector

CTN :40740416

08 Jul, 2025 NA

Hyderabad - Telangana

Tender For supply of anti vibration boring bar ref: a-d50-10d-c , interchangable boring head ref: avc-d40-svqcl-16 , interchangable boring head ref: avc-d40-sdunl-11t , vdi holder for anti vibration boring bar ref: vdi50 av-d50-jhp , centre height adjustment device ref: avc set 32-60-lev , interchangable boring head ref: avc-d40-ddunl-15t

Rig Boring Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Corporations And Associations And Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector