Latest rig foundation Tenders | Government rig foundation Tenders

corporations/Associations/Others

CTN :45151622

18 May, 2026 9.74 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipments, open air gym, in various parks in dhanas, chandigarh, under wdf - providing and fixing of swing ( 2 seater) 10 long 8 -6 high & 5 -0 wide made out of 2 m.s. pipe completed as per drg no. 02 job no. m-06 and to the entire satisfaction of engineer-in-charge, providing & fixing of wide slide ssarea : 3.9 m x 1.3 msafe play area : 4.9 m x 2.3 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made up of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angle. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder is made are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., providing & fixing of multi activity play system (ii) (maps ii):deck 3 ht. 1 deck 2.5 ht. 1 frp staircase 3 ht. 1 frp curve slide 3 ht. 1rainbow ladder 1 double swing 1 bubble pannel 1 steering 1area: 7mx5m safe area: 8mx6m 1. deck 3 height & 2.5 height - the deck of maps is made up of 4mm thickness fiberglass reinforced plastic. the top of the platform shall be made up of anti skid surface with multicolored pigment resign. all the attachments is through nylon clamps only. the size of platform is 1.6mx1.6m. 2. frp stairs case - the ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. it should have reinforcement to maintain strength and avoid bending. 3. frp curve slide- it is made up of 4mm thickness fiber reinforced plastic. 4. rainbow ladder- it is 5 long in height, the main frame of ladder is made up 20 nb g.i. pipe and risers are made up of 40 nb g.i. pipes. 5. double swing.-leg support in 40 nb g.i. pipe and top pipe is made up of 50 nb g.i. pipe seat is made up of 10 mm reinforced rubbers and g.i. pipe should be rubber coated and movement with nylon clamps at top. 6. bubble panel.-the railing is providing to all decks for safety and it is made up of lldpe. 7. steering wheel-it is made up of lldpe., providing and fixing of chest press double complete in all respects having following specifications. size / dimensions- length -1200 milimeter, width- 700 milimeter, height 1800 milimeter maximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green, paint finish- power coated, uv resistant, paint coating thickness (min) 100 micrometer, warranty - 3 years. co

CTN :45148799

20 May, 2026 1.09 Crore

Baramulla - Jammu And Kashmir

Tender For supply of mmg pd of size 2400x2400mm , hydrophobic poreblocking ingredients , soakage pit cover made of 1mm thick ms sheet , quick setting compound , manufactured sand , aggregate 20mm , aggregate 40mm , aggregate 63mm , pcc soild blocks , integral water proofing compound , mild steel tmt bars 12 mm dia , mild steel tmt bars 08 mm dia , ms binding wire , ply wood 2.00m x 0.30m and 12mm thick , ply wood 10 mm thick , ismb conforming to is 808 2021 , 5mm thick ms plate , 4 nos x 16mm dia, 100mm long foundation bolt , srt size 2000x613x180mm , hdpe sand bag of size 75x40 cm , synthetic enamel paint , pbs roll , 0.60mm thick ppgi sheets, size 810 x 3050mm long , 3.00 m long rectangular hollow section , 2.30m long rectangular hollow section , 150mm long ms angle , self taping screw 80mm , silicone gel sealant , bitumen for filling of expansion joint , hdpe sheet confirmin , prefabricated steel door size 600mm x450mm , prefabricated steel door size 900mm x1800mm , ms rack of size 1.22m x 0.61m x 1.65m , pre fab welded door lintel made out , pre fab welded window loop hole , ci grating of size 300 x 300 mm with frame , red oxide primer , oil bound distempe , polyurethane thinner , common burnt clay building bricks , chalk white , cement base paint , 18w led tube and fitting 4 ft , 09w led bulb , 9 w inverter bulb , pvc ceiling rose 2 3 terminal , pvc casing capping square box 4x4 , 6a one way single module flush type modular switch , 1 module concealed metal flush box , white cover plate with frame 1 module , 2 module concealed metal flush box , white cover plate with frame 2 module , cable pvc insulated 1.5 sqmm , flexible wire pvc insulated twin core twisted , 25mm x 16mm pvc casing capping , 25mm pvc casing capping l bend , pvc casing capping t 25mm , pvc casing capping elbow 25mm , 20 mm ms drywall cross recessed screws , mcb double pole 230v ac , pressure sensitive self adhesive , 16a spn or dp main switches , mcb distribution boards in sheet metal enclosure 2 ways , brick trowe , drop forged high grade carbon steel brick , lightweight extruded aluminum alloy straight edge generally , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , metal hand rammers , heavy duty pickaxes , shovel square , single-piece hot forged , heavy duty flat painting brush , non slip heavy duty industrial rubber gloves , aluminium spirit levels 12 inch , transparent flexible pvc water leveling tubes in 50 meter , cutting pliers , non metallic fiberglass measuring tape 15 mtr , heavy duty crow bar 5 feet , wooden flat gurmala , earthing electrode , gi pipe 100 mm dia med , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long , ms clamp 40x2mm with nut and bolt , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium grade 40mm dia 6 mtr long , natural sand , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

CTN :45148599

21 May, 2026 NA

West Kameng - Arunachal Pradesh

Tender For supply of climbing wall for rock climbing training with total climbing surface area 600 sqftheight , ms frame structure frame work subsidiary frame work with anchors , raft foundation for climbing wall , painting for steel structure and panels with two coat of red primer , complete installation , climbing rope dynamic 9.8mm , seat harness universal size , screw carabiner jumbo , screw carabiner regular size , chalk powder , chalk bag , climbing holds movable , chain anchors , helmet

CTN :45148990

30 May, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of high mast tower pole , head frame and carriage , winch system , led flood lights , lighting installation , solar panels , battery bank , hybrid inverter , site preparation , excavation , rcc foundation , anchor bolts , earthing , electrical panel , cabling , transport , installation , testing , commissioning , handover , safety

CTN :45138105

19 May, 2026 NA

Koraput - Odisha

Tender For supply of boundary fencing nets with frame around sports ground of nad sunabeda : : - isa 65 x 5 thk x 20 ft , isa 40 x 5 thk x 20 ft , isa 50 x 5 thk x 20 ft , isa 30 x 5 thk x 20 ft , flat 30 x 5 thk x 20 ft , wire mesh , concrete foundation

CTN :45060634

13 May, 2026 3.49 Lacs

Latehar - Jharkhand

Tender For dismantling repairing of crack its mounting n back fitment of fuel tank mounting bracket sys anchor pin stopper frame fire extinguisher frame 02 nos tie rod 02 nos steering assy operator seat and foundation both side flap guard etc in bh60 tone dumpe

CTN :45061897

13 May, 2026 3.70 Lacs

Latehar - Jharkhand

Tender For repairing replacement of undercarriage assembly carrier roller foundation track chain n track frame and repairing of lift cylinder assembly seal replacement both sides and repairing of eye and its refitment in dozer sl no 104870 under ttk ocp rajhar

Central Government / Public Sector

CTN :45146142

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12112ms26b, 98050011, quantity- 79.435 mts. scrap condemned unserviceable ms-ci signal interlocking materials consisting of levers, rods, ms campus rollers of molb, molb weights, molb booms, signal tubular post, roller trestle, stop boards, 33 mm rods, signal arms, gi and ms wires, lc gate pipes, gate structures, ladders, angles, channels, joists, roller stands, electric poles, cable termination box, direct type lever frame, sa 1914 type trays, sm slides, ssi termination rack, control panels, signal booms, boom locks, cable termination rack, adjustable crank, e type lock, cable marker, ground connection rods, fuse unit, power racks, cam path, gear box, signal reverser, ground lever frame, molb, eolb pedestal, telecom charger body, wire adjustment screws, molb compass roller, gate weights, cls tubular post, surface base, nuts, bolts, rounds, turnout wheels, eye joints, point machine covers, clamps, signal buckets, pulleys, d.w.diversion wheel, gate control panel, calling on unit, gear box assembly with clutch, winch, offset brackets, h.p lock, chequered plates, ptb, location boxes, rkt, axle counter coil fixing plate, shunt signals, route arm, route [1 way, 2 way, 3 way and 4 way], ib hut cut parts, ms electrical point detector, junction type route indicator, route indicators, structures, casing structures, ci bases, gear wheels, flats, cable termination base, u- brackets, ci weights of booms, fabricated posts, cls 2, 3 and 4 aspect units, trestle, sge block instrument, y-crank, stands for wheel tension measuring devices of d.w clutch, lock bar clips, drum clock, ec boxes, relay racks, tlj boxes, foundation shoe, ekt, pd clamps, galaxy stand, meeting posts, signal lamp structures, point rods and other similar signal and interlocking scrap material of sorts and sizes, with or without attachments including negligible nf attachments. note- nf attachments are approximately 2 percent of lot quantity. location- bin no- 112, right side of road no- 1. hsn code- 72044900. gst- 18 percent note: private crane permitted for loading purpose. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per motor vehicle act 1988.

Central Government/Public Sector

CTN :45139024

01 Jun, 2026 NA

Mysore - Karnataka

Tender For design, supply, foundation, installation, testing , commissioning training and proving out of hydraulic c frame press machine -100ton capacity along with warranty(warranty includes preventive maintenance schedule (pms) 8 quarters as per the format enclosed as per annexure b) as per the technical specification annexure a enclosed. [warranty period: 30 months after the date of delivery) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45125921

18 May, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - condemned diesel loco no. 36157 wds/6 with iron steel and non-ferrous. restricted items: 1. complete bogie frame with wheel set, axel box and gear case = 01 nos., 2. 03 nos. of wheel sets with axel boxes without gear case = 01 nos. removed items: 1. pneumatic valve and air dryer = 01 nos., 2. radiator core = 01 nos., 3. came shaft = 01 nos., 4. extension shaft = 01 nos., 5. lube oil junction 01 and junction pipe 02 = 01 nos., 6. lube oil cooler pipe = 01 nos., 7. lube oil strainer, bottom pipe and cock = 01 nos., 8. steel balo and upper rode lower = 01 nos., 9. water tank = 01 nos., 10. fuel primary filter body and secondary filter body = 01 nos., 11. sensor loader balo = 01 nos., 12. tsc foundation plate = 01 nos., 13. bubble collector pipe ( z pipe, c pipe) = 01 nos., 14. water temperature gauge, pipe = 01 nos. 15. traction motor = 06 nos. remark: 1. restricted items to be returned to the stock holder in good condition by the purchaser at the time of delivery. 2. lot no. is painted on loco. 3. approach road is available up to lot. 4. hsd oil and lubricants if found to be returned to the stock holder. 5. locos are presently stabled at diesel shed kurla. after auction and before handing over, loco will be placed at cla yard for cutting and delivery purpose. purchaser is advised that loco will be placed only after certification of line by sse/pway/mnkd and as advised by sse/d/cla. 6. after purchaser submit all the documents and d.o after auction to dme/d/cla office, sse/d/cla in consultation with sse/p.way/mnkd will decide the date of placement of loco at cutting yard and only after handing over of loco will be done. 6. purchaser has to ensure safety of railway asset and his labour while working in railway premises. if any losses arise due to negligence, the purchaser will be fully responsible. 7. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep enough water/sand at the cutting site. 10.lot is ok for sale. qty : 01 number. location: presently stabled at diesel loco shed kurla. stock holder: dme d cla .

Rig Foundation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector