Tender For desilting of conveyance system rising main from lifting station to cetp of 600mm dia having 1.8 k.m. length at wazirpur by using super sucker machine, jetting machine and tanks etc. including safety gears and safety equipments etc
Tender For providing of custom bid for services - supply of one sedan type air conditioned tourist taxi more than 1100 cc engine capacity with driver and fuel on hire for service of cgms conveyance fact cochin division
Tender For providing 1 no. 40 seating capacity bus for the conveyance of engineers of btps along with driver and cleaner on hire basis (yom: not older than 7 years) for the year 2025-2026 from the actual date of commencement of work to 31.03.2026
Tender For supply and delivery of electrical materials for maimenance of street lights in tadepalli urban 6 to 14, 19 & 20 wards and ippotam, prathuru, chirravuru rural areas under ae-4 section in mangalagiri tadepalli municipal corporation under general funds - "supply and transportation of led driver as per is 15885 (part 2/sec 13) 2012 with input line voltage 120v-270v ac, 50hz with surge protection more than 2.5 kv, ip20,suitable for led indoor luminaire, with 2 years warranty.makes: as per list of recommended brands.elec-3.8.4020w", 36w, "supply and transportation of led driver as per is 15885 (part 2/sec 13). 2012 with input line voltage 120v-270v ac, 50hz with surge protection of 4.0 kv, ip20, suitable for led street light fitting with 2 years warrantymakes: as per list of recommended brands.elec-3.8.4145-90 w", 120-180 w, "supply and transportation of led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120-270v ac, p.f>0.90, high power leds having system efficacy >=120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3 3), driver surge protection 4kv, in house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k - 5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty. makes: as per list of recommended brands as category ielec-3.8.2320 w", 30 w, "supply and transportation of ......... led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120-270v ac, p.f > 0.90, high power leds having system efficacy >= 120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3), driver surge protection 4kv, in house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k - 5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty.makes: as per list of recommended brands as category ielec-3.8.2490w", 120w, 210w, "supply of wpsc (weather proof single core) isi alluminium wire. makes: gold medal / million/gm/5 vimal/finecab/nakoda/nanadicab/payal, sudhakar/rajrigandha/ airson/orbit/ollvin, elec-1.6.12.5 sqmm wpsc",, supply and delivery of pvc/cotton tape role(8 mtrs) elec-8.1.15, "supply of.......... 10ka c/d curve isi mark.makes: legrand-dx3/schneider-acti9/hager-h3/ siemens-5sx4/ havells stadx/l&t-au/indo asian-opti pro/hpl (techno) elec-2.10.140-63a, sp mcb", 40-63a, tp mcb, "supply of...... porcelain rewirable fuse units.makes: c&s/standard/hpl/sputnik/million/gold medal benlo/anchor elec-2.7.163a, 415v", 100a, 415v, "supply and delivery of pvc box make: sintex including cost & conveyance etc., complete as per lr15"" x 18""" supply and delivery of 8mts pole clamp sets (2no.s per set with bolts & nuts) including cost & conveyance etc., complete as per lr, supply and delivery of spun pole (round) clamp sets (2no.s per set with bolts & nuts) including cost & conveyance etc., complete as per lr, supply and delivery of 1" gi pole brackets (3ft size) including cost & conveyance etc., complete as per lr
Tender For handling and conveyance of constructional stores (cement, bitumen, bitumen emulsion, steel , miscellaneous stores) from 509 sstc gref at chalthi to various locations of road sector in aor of 1447 bcc under 47 brtf of project hirak in uttarakhand state
Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka kalol under taluka panchayat, kalol under mgnrega (annual unit rate) - cement isi mark (binani , j.k laxmi, ultratack, ambuja-53grade,etc.., supplying crushed stone aggregate(single size): 10mm nominal size, supplying crushed stone aggregate(single size): 20mm nominal size, supplying crushed stone aggregate 40mm to 63mm, supplying hand broken stone 40 to 63mm, supplying fine sand, coarse sand, stone dust, rubble (quarry) with conventional charge, tmt steel.. (all size-4,6,8,10,12 etc, tmt bar fe.415 brand ), hysd steel, binding wire, kota stone (policed) 25 mm, wall tiles / glaze tiles, vitrified tiles, wash basin, pvc water tank, indian orissa toi pan including p trap, cement sheet, patra g.i.sheet, 30/72 toilet door, colour (isi mark) (oil paints), colour (isi mark) (distamper,apex,imarsal,), iron pipe and angel, mixture machine rent, centing rent, shuttering ( with fitting), water tanker rent, electric light fitting material (with fitting), motor (1.5 hp stater with board), cable (1x3x4 sqm standard), murrum / binding material, white cement, board (mgnrega) with fitting, iron window & door, supplying coloured inter locking c.c. paver blockconcrete block 60mm, supplying coloured inter locking c.c. paver blockconcrete block 80 mm, ceramic tiles, wash basin white vitrious 550mm x 400mm, wash basin white vitrious 630mm x 510mm, r.c.c heavy duty non-pressure pipe i.s. class npequal to3 300mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to3 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to3 600mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to2 300mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to2 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to2 600mm dia., vitrified granite tiles 8 mm to 10 m thick 24 x 24 size light shade, conveyance from 0.5 km tractor with trolly, conveyance from 1.0 km tractor with trolly, conveyance from 2.0 km tractor with trolly, conveyance from 3.0 km tractor with trolly
Tender For supply of canter (swaraj mahindra) (work shop mandla) - unserviceble material, canter (swaraj mahindra) (work shop mandla) (mp027469), brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete, plastering in c.m 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete
Tender For supply of drr (jessop) (work shop mandla) - unserviceble material, drr (jessop) (work shop mandla) reg no 2666, brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete, plastering in c.m 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete
Tender For unserviceble material (plant machinary) dindori. - unserviceble material, unservicble material (plant & machinary) dindori, brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete, plastering in c.m 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete
Tender For unserviceble material (store sub division e/m narsinghpur. - unserviceble material, unserviceble material (store sub division e/m narsinghpur), brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete, plastering in c.m 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete