Latest road roller Tenders | Government road roller Tenders

State Government

CTN :40691595

24 Jun, 2025 17.31 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure threshing floor including pucca storage at thiruvettakudy vp in kottucherry commune - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheets for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charges of diesel road roller 8 to 10 tonne including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

corporations/Associations/Others

CTN :40709992

25 Jun, 2025 11.48 Lacs

Ahmedabad - Gujarat

Tender For providing & supplying trac tor trolly with labour, jcband roller for solving road related complain at ambli,bodakdev area and other area in bodakdev ward ofnorth west zone.(arc)

corporations/Associations/Others

CTN :40709995

25 Jun, 2025 10.99 Lacs

Ahmedabad - Gujarat

Tender For providing & supplying trac tor trolly with labour, jcband roller for solving road related complain atmemnagar, vastrapur area and other area in bodakdevward of north west zone.(arc)

CTN :40685543

03 Jul, 2025 NA

Bangalore - Karnataka

Tender For supply of reapir of mt vehicals - engine mounting front , engine mounting rear , old mounting removing and new mounting fitting and testing labour charge , rotary pump repair and service with parts , nozzle , cam plate , td piston , service kit , tappet roller , pump stripping service above parts firing and pump assembled and calibrating computerised machine , engine push rod , tappet seal , rotary pump removing the vehcile and after service and pump and fitting all dismantling fuel connection fitting and full tappet adjust and vehicle starting and testing labour charges , positioner , tappet toller , tensioner , pump removing the vehicle and after service pump fitting and all calibrating and testing with computerised machine , gear box assembly dismatching and clutch plate pressure plate removing and gear box clutch system full service and reassembled and fitting and vehicle , release bearing , suspension bush , master cylinder asembly removing and full service and fitting the vehicle , fuel pump motor , shock absorber removing and service and fitting , butter front , oil seal set 6 nos , spark plug , nut bolt and washer , door catch , front brake pad removing service and fitting , rear brake lining , petrol filter , air filter , clutch cable fitting , oil pump assembling fitting , joint coupling with bearing , joint star removing service and fitting , silencer packing , wheel bearing front , rear brake bearing , seat cover full change and new making with good quality pvc cloth and foam and fitting the vehicle , suspension full lathe machine work , front pump assembly , full electrical system checking and service , tail light and side indicators , bonnet mirror and side mirror , power window checking and switch replace and system checking , full machine parts removing and above mentioned parts one by one all fitting and checking and road testing labour charge , ac checking and full service and gas filling and testing

CTN :40711381

20 Jun, 2025 4.95 Lacs

Hoshiarpur - Punjab

Tender For supply of rollers smooth wheeled diesel road roller

CTN :40691868

17 Jun, 2025 1.91 Crore

Phulparas - Bihar

Tender For t04 to nathopur via bisanpur length - 1.561 km - setting out pillars providing & fixing of working benchmark pillars 2 nos. per km & 6 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling brick/tile workdismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of structuresdismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202.a) reinforced cement concrete, removing all types of hume pipe and stacking within a lead of 1000m including earthwork and dismantling of masonary works as per technical specification clause 202.1 .b) above 600 mm to 900 mm dia hume pipe, box cuttingexcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, construction of embankment with approved material deposited from road way cutting and excavation from drain and foundation of other structures and excavated with an average lead of 50 m graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5 (including royality & labour cess)., construction of embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m & 100 m as per technical specification clause 301.5 . (including royality & labour cess).for 1000 m lead @ 20 %, for 100 m lead @ 80%, construction of subgrade and earthen shouldersconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., granular sub-base with well graded material (table 400.1)( by mix in place method ) for grading i materialconstruction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means) providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of

CTN :40627871

18 Jun, 2025 37.84 Lacs

Jhajha - Bihar

Tender For mr-n-24-25- jhajha-01 (kiyajori to jogiyatilha) - kiyajori to jogiyatilha clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification clause 303.1., for 100 m lead @ 80 %, for 100 m lead @ 20 %, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less than 150kg/cm, opc to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant , trasported to site, laid with a paver with electronic sensor , compacting with 8-10 tonnes vibrartory roller, finishing and curing., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum s

CTN :40691865

18 Jun, 2025 9.63 Crore

Sasaram - Bihar

Tender For mr-n/24-25 sasaram-02/01 - l068-t05 to panrwa (vr37), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade 2) : construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam with stone screening gr-ii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., water bound macadam gr iii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.2 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capasity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion ,construction joints, ap

CTN :40675108

25 Jun, 2025 5.22 Lacs

Multi City - Karnataka

Tender For supply of materials for cc drian work angaragatti village near nandihalli road under mgnrega scheem - vibratory roller 8 tonne_angaragatti cc drain work, water tanker_angaragatti cc drain work, gravel 2.36 mm/murrum_angaragatti cc drain work, water_angaragatti cc drain work, add handling , loading and unloading at 2% on material_angaragatti cc drain work, casurina poles 100 - 150 mm_angaragatti cc drain work, silver oak or equivalent planks 38 mm thick_angaragatti cc drain work, jungle wood runners and planks_angaragatti cc drain work, binding wire_angaragatti cc drain work, tmt bars fe 500_angaragatti cc drain work, hom of vibrator 0.71 days_angaragatti cc drain work, plasticizer / super plasticizer_angaragatti cc drain work, name board_angaragatti cc drain work, add watering charges at 1 % on material_angaragatti cc drain work, mixer (concrete) - 1 cum capacity_angaragatti cc drain work, portland cement_angaragatti cc drain work, coarse sand (zone iii)_angaragatti cc drain work, broken stone aggregate 12 mm to 10 mm size_angaragatti cc drain work, broken stone aggregate 20 mm size_angaragatti cc drain work, broken stone aggregate 40 mm size_angaragatti cc drain work

Central Government And Public Sector

CTN :40656986

16 Jun, 2025 1.00 Lacs

Jodhpur - Rajasthan

Tender For lmp 411 engine spare and pump reparing and spare-, element, , delivery valve, , nozzle, , distance piece, , spandrel, , roller pin bush 1, , gouner bush, , bearing 30204/302003, , element lock, , packing kit, , washer kit, , ring kit, , cotton, , control road, , oil plate, , guvnar patti, , tappet assembly, , lever, , repair work, , removing nozzle from lmp(leyland) and repairing and refitting the nozzle., , opening and repairing pump with lmp (leyland), removing old parts, installing new parts and re-fitting., , head repair work, , seat fitting and cutting, , guide fitting and cutting, , head testing, , head acid cleaning, , head sur fakeship, , chawl seat grinding, , boring work, , removing old 6 sleeves from the dead and fitting new 6 sleeves., , removing old bush from the road and fitting new bush., , checking the connecting road bend.

Road Roller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector