Tender For design, supply, erection and commissioning of final welding fixture and manipulator of (a) air spring suspension (asr) fiat bogie frame break beam assembly and (b) bogie side frame assembly as p er specification enclosed. [ warranty period: 30 months after the date of delivery ]
Tender For supply of end wall assembly for lhb gs & scn (amrit bharat ) coaches note:-(1)in dra wings "mig welding (131) is to be read as tig welding (141)" as per design letter no. md4 6231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufactu ring. there may be minor modification in design., as per drawing: 75415001 alt. 'br1', packing instruction: 1. the supplier shall pack the end wall in a suitably designed returnable fixt ure in such a way that end wall shall not get scratched, damaged, twisted during tra nsportation, storage and lifting and to avoid scratches on outer surface. it should b e seperated by suitable environment friendly blocks to avaoid rubbing of two endwall surfaces . it should have standard clamping /fastening mechanism so that it can be ope ned easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exchanged in the second lot su pply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated havi ng sufficient strenght to bear approximate 2 tonne load in static & moving condition o f two coach sets of end wall. 4. the fixture /frame/pallet should be designed so that t he packed end wall preferably remain in vertical position to minimize surface area. 5. it should also be suitable for storage of end wallunder open sky. [ warranty period: 30 m onths after the date of delivery ]
Tender For corrigendum : supply of 1no. spot welding equipment with standard accessories and fixture for sub - assy. of "selector assembly" (drawing no. 6145-1.c81-???/?2) with following parts. (1) selector-drg no. 6045-1.1-26/e2 1.0 (2) washer -drg no. 6145-1.1-35/e2 to be spot welded with "selector" as per "selector with washer" drawing no. 6145-1.?61-4??/?2 ??mponent of ak-203 rifle. 3) after spot welding of washer with selector broaching operation to be performed as per designation of document ??? 038.?? ?4.13 and operation number 30.015.
Tender For supply, installation and commissioning of manipulator for casnub bogie consists of :- (i) 2 ax is manipulator suitable to hold and positioning of casnub bogie with attached parts during overhauling sta ge rectification work including dismantling and welding. (ii) manipulator design shall be with 3500kgs payl oad capacity considering safety factor. (iii) manipulator with electric drives for vertical and rotational axis. (with suitable reduction geared motors). equipped with brake motors. (iv) contactor based control system with isolation switch and emergency buttons on both vertical columns will provide separate pendant with all control buttons for ease in operating and manually inching type operation to achieve desired welding po sition. (v) cradle type synchronization - one side drive end and second side work as driven end. (syncronis ed mechanically and electrically). (vi) manipulator construction will be in steel plates, up/down movement with screw and box nut mechanism and rotation with slewing ring supported with guide rollers. proper h olding and clamping fixture for bogie. scope of supply and detailed spec is attached . firm 's offer : own m ake ade. [ warranty period: 30 months after the date of delivery ]
Tender For end wall assembly note:-in drawings " mig welding (131) is read as tig weldi ng (141) " as per design letter no. md46231 dated 16.03.2024 , as per drawing: lp15112 alt. ' h' & mdts21332 rev-00 dated 09.06.2020 ,fitted alongwith shutter complete to drg.no. 2 10113.0.76.300.012 alt'-r1', packing instruction: 1. the supplier shall pack the end wall in a s uitably designed returnable fixture in such a way that end wall shall not get scratch ed, damaged, twisted during transportation, storage and lifting and to avoid scratch es on outer surface. it should be wrapped with enviroment friendly material and it sho uld have standard clamping /fastening mechanism so that it can be opened easily. it sh ould have firm's identification mark. 2. first returanable fixture along with end wall b e retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixt ure from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 2 tonne load in static & moving condition of two coach sets of en d wall. 4. the fixture /frame/pallet should be designed so that the packed end wall pre ferably remain in vertical position to minimize surface area. 5. it should also be suitabl e for storage of end wallunder open sky. [ warranty period: 30 months after the date of deli very ]
Tender For supply of end wall assembly for lhb gs & scn (amrit bharat ) coaches note:-(1)in dra wings "mig welding (131) is to be read as tig welding (141)" as per design letter no. md4 6231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufactu ring. there may be minor modification in design., as per drawing: 75415001 alt. 'br1', packing instruction: 1. the supplier shall pack the end wall in a suitably designed returnable fixt ure in such a way that end wall shall not get scratched, damaged, twisted during tra nsportation, storage and lifting and to avoid scratches on outer surface. it should b e seperated by suitable environment friendly blocks to avaoid rubbing of two endwall surfaces . it should have standard clamping /fastening mechanism so that it can be ope ned easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exchanged in the second lot su pply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated havi ng sufficient strenght to bear approximate 2 tonne load in static & moving condition o f two coach sets of end wall. 4. the fixture /frame/pallet should be designed so that t he packed end wall preferably remain in vertical position to minimize surface area. 5. it should also be suitable for storage of end wallunder open sky. [ warranty period: 30 m onths after the date of delivery ]
Tender For supply of end wall assembly for lhb gs & scn (amrit bharat ) coaches note:-(1)in dra wings "mig welding (131) is to be read as tig welding (141)" as per design letter no. md4 6231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufactu ring. there may be minor modification in design., as per drawing: 75415001 alt. 'br1', packing instruction: 1. the supplier shall pack the end wall in a suitably designed returnable fixt ure in such a way that end wall shall not get scratched, damaged, twisted during tra nsportation, storage and lifting and to avoid scratches on outer surface. it should b e seperated by suitable environment friendly blocks to avaoid rubbing of two endwall surfaces . it should have standard clamping /fastening mechanism so that it can be ope ned easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exchanged in the second lot su pply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated havi ng sufficient strenght to bear approximate 2 tonne load in static & moving condition o f two coach sets of end wall. 4. the fixture /frame/pallet should be designed so that t he packed end wall preferably remain in vertical position to minimize surface area. 5. it should also be suitable for storage of end wallunder open sky. [ warranty period: 30 m onths after the date of delivery ]
Tender For supply of stopper for pneumatic test for air tightness as per adk 7871 6683 hvf 8800 01532 , leak test fixture as per adk 7871 6682 cb hvf8800 01533 , fixture for assembly and welding of sheets to fan partition as per adk 0863 460 hvf 8800 01534
Tender For supply of mt shed and field security light - paint synthetic enamel olive green 1st quality , fire extinguisher a b c type portable net 2 kg capacity cylindrical , decorative type ultra slim linear led lighting fixture with extruded polycarbonate environmnetal friendly energy efficient led tube light fitting 18 watt with all fixing arrangement et , led security light and electronic driver of 24 watt led 6000k with security light bracket of 40mm dia gi pipe light grade bend in 45 degree angle with all fixing arrangements as per tech specs , mcb db spn 8 way double door 240 volts 50 hz with aluminium bus bar , mcb 6 amps single pole 240 volts , mcb 20 amps single pole 240 volts c curve , isolator 40 amps dp 240 volts , ceiling rose pvc 2 to 3 terminal , tape insulation 10 mtr , pvc copper cable flrs 1 point 5 sqmm single core multistrand , pvc copper cable flrs 1 sqmm single core multistrand 1100 volts grade , cable pvc insulated aluminium conductor served with inner sheathing of pvc tape armoured with galvanized steel wire or tape and overall pvc sheathed cross sectional area 10 sqmm 2 core , pvc insulated and pvc sheathed multistrand copper conductor flexible industrial cable 1100 volts 3 core 1 sqmm , pvc copper cable flrs 2 point 5 sqmm single core with multistrand 1100 volts grade , steel screw full threaded 1inch 100 nos in each pkt , pvc shaddle clip with screw for 20mm dia conduite , pvc condute pipe of 20mm daa 10 feet long , pvc elbow for condute pipe of size 20mm dia , pvc squarer ound block for conduite pipe of size 20mm dia , pvc tee for condute pipe of size 20mm dia , switch piano modular type 10 amp one way , switch piano modular type 20 amp one way , socket 10 a modular type , socket multi purpose 3 pin 10 and 3 pin 20 amps modular type of 2 module , surface plastic box suitable for modular switches and socket of 4 module , surface plastic box suitable for modular switches and socket of 3 module , surface plastic box suitable for modular switches and socket of 2 module , solid plate with base frame suitable for surface platic box of 4 module , solid plate with base frame suitable for surface platic box of 3 module , solid plate with base frame suitable for surface platic box of 2 module , blank plate of single module , pvc flexible conduit 25mm dia , lightening conductor complete set as per brief tech specs , electric earthing complete set as per brief tech specs , hoe fawda with handle as sample approved , ppr jointing kit , electric tile cutting machine 2100 w with 5 nos inter changeable blades , blades suitable for tile cutting machine , rain coat og colour as per sample approved , adjustable wrench 305 mm , measuring tape 30 mtr , puf rivit machine heavy duty , measuring tape 5mtr , screw driver 903 ibt steel 2 in 1 stubby screw driver green , spirit level 1 mm accuracy without magnet , magnetic bit screw 8mm , magnetic bit screw 6mm , magnetic bit screw 4mm , single phase 200 amp mini portable arc welding machine , synthetic tarpauline gsm 30 feet x 30 feet as per sample approved , iron cutter blade 4 inch , wooden cutter blade 4inch , wooden cutter machine , cutting plier heavy duty , magnetic star bits each pkt 5 nos , concrete bits 4mm 6mm 8mm 10mm 12mm one of each in a set , wooden gurmala best quality , hdgi pole of 8 mtr long 3mm thick minimum top dia not less than 40mm and bottom dia 120mm size of base plate 225x225x16mm including 20mm dia 600mm long foundation bolt as per brief tech specs , led security light 60 watt made up of pressure die cast aluminium as per brief tech specs , pvc sheathed copper frls cable 1 point 5 sqmm long 2 core with multistrand 1100 volts grade in red black green colour , pvc cable insulated and sheathed armoured copper conductor served with inner sheathing of pvc tape armoured with galvanized steel wire cross sectional area 10 sqmm 3 core as per tech specs , suppy of timelite distribution board street light bds of rating 65amp tp with mcc 63a tpn with 230v digital 24 hr ti