Latest roll plug Tenders | Government roll plug Tenders

corporations/Associations/Others

CTN :39214063

19 Feb, 2025 NA

Tuticorin - Tamil Nadu

Tender For attending minor repair works testing and checking the healthiness of electronic controller control panel high voltage rectifier transformers heaters and rapping motors attending the defects of high voltage rectifier transformer esp iv and v for

Central Government/Public Sector

CTN :39171113

27 Feb, 2025 1.80 Crore

Secunderabad - Telangana

Tender For replacement of security equipment installations at dmde office complex under ge i rnd kanchanbagh, hyderabad - supply and fixing of electric fencing - 520 rm as specified below as per site requirement including taking down existing fencing with all connected accessories viz. energizer, boom barrier, hydraulic tyre killer, turnstile gate, swing lane barrier, fencing posts, fencing wire, insulators, door frame metal detector etc, complete all as specified and directed by engineer-in-charge., (a) general description(a) this scope involves, design, supply, installation, testing and commissioning of a non-lethal high security. electrical fencing for the purpose of deterrence, detection, and movement control of people / unwarranted trespassing into the premises for 520-meters perimeter length.(b) anyone who touches the power fencing when the system is armed shall be repelled by a short, sharp, painful, but safe pulsed dc high voltage shock. alarms shall be generated when someone touches, tries to climb through or tampers with the power fencing system., (c) the electric fencing shall be divided into two zones.(d) this system should be able to alert security personnel of an attempted intrusion and identify the zone around the perimeter of the site.(e) the electric fence is to be installed on the existing wall and the height of the fence will be 1.1 meters from top of the wall with 11 nos. of fence wires having 100mm gap between adjacent wires and it measure 1mtr.(f) electric fence posts are to be hot dip galvanized., (g) distance between strain fence posts spacing shall not exceed 50-meter nominal.(h) distance between intermediate fence posts spacing shall not exceed 3-meter nominal.(j) the electric fence shall incorporate uv stabilized intermediate post insulators.(k) warning signs shall be mounted around the fence line at intervals not exceeding 10m or at every turn on the physical fence.(l) dual zone fence energizer shall be installed to create 2 zones at site., (m) one dual zone led keypad shall be connected to fence energizer for local control and programming purpose.(n) a touchscreen controller should be placed in control room. fence energizer should communicate with touch screen controller over rs485 network.(o) the space between adjacent wires on the electric fence shall be no more than 10cm.(p) anti-climb configuration at strain points shall be provided. electric fence wire shall be looped around the strain post and connected back onto itself.(q) all high voltage impulse wiring shall be run in conduit separate from any other wiring.(r) the fence energizer shall be mounted in the weatherproof enclosure.(s) the energizer should comply with iec 60335-2-76 and is302-2-76 standards., (b) technical specification (electric fence system):energizerthe fence energizer should have the following minimum features: energizer should be dual zone with independent zone control. energizer should communicate with control room on rs485 network. energizer should have lcd display with background colours which changes according to the status of the energizer. green colour should indicate that all is fine, orange indicate that attention is required and red indicates an alarm condition., energizer should display the following information when specific codes are inserted from keypad: fence health on a scale of 1 to 9 for each zone independently, fence output voltage, fence return voltage, energy stored, capacity used and battery voltage. output energy 3.7 joule with 500 ohms load. pulse interval 1 sec. pulse duration should be less than 0.1ms. energizer should have apt - adaptive power technology functionality. which means the energizers should offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. this maximises the power on the fence and minimises false alarms., individual high voltage transformer for each zone. magnetic tag switch should be provided for on/off the energizer without

CTN :39224751

25 Feb, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of embedded system controller unit arm based processor with quad core on board soc and 64 bit industrial micro controller for multiple signal sensors measurements , customized embedded software to measure the distance comma signal from light comma speed and gear which will communicate to all devices and etc , obstacle name reader industrial ultra high frequency reader with ip66 enclosure with 12v dc input with mounting accessories , distance sensor that is water proof industrial proximity sensor comma distance 2 to 5 meter with metal enclosure with input voltage range from 5 to 30 dc , obstacle name transmitter that is rfid pole for 15 obstacles comma programmed pole with pvc pipe of 75 mm dia and 3 feet height , signal reflector iron board 4 x 4 with 2x4 plate frame to measure the left comma right and back distance , auto electrical wires and flexible hose with accessories , wi fi routers with 4 to 5 hours battery backup , intel core laptop with 14inches display to run training programme , modules for audio and speed , laser jet or ink jet printer , installation charges including inspection, design, civil labour and engineering charges

CTN :38748493

21 Feb, 2025 7.96 Crore

Jodhpur - Rajasthan

Tender For corrigendum : electrical lab equipment - colour digital storage oscilloscope 100mhz 1gs/s with fft, voltmeter 0-500v (analog ), voltmeter 0-500v (analog ) moving iron type, ammeter 0-1-2a (analog ) moving iron type, ammeter 0-2.5-5a (analog ) pmmc type, ammeter 0-5-10a (analog) moving iron type, wattmeter lpf dynamometer type, wattmeter 5-10a, 75-300-600v upf dynamometer type, megger 500v 1000m digital insulation tester, single person push button operation, bridge trainer kit, digital earth tester, energy meter 1-phase, trivector meter, dc motor cut section for lab application with manual, transistor characteristics npn-pnp trainer kit, trainer kit for turn off circuit of scr for laboratory purpose, smps trainer kit power supply : 230 v ac , 50 hz, ups trainer kit input voltage 180-260 volts, 50 hz, three phase induction motor cut section for lab application, three phase 6 cage induction motor trainer kit ,, universal motor phase single phase, stepper motor voltage 24-48 vdc, three phase squirrel cage induction motor trainer kit for speed control using auto transformer and vvvf method mains supply : three phase, 415v 10%, 50hz, lux meter, house & commercial wiring installation trainer, speed control of dc shunt motor trainer, speed control of dc series motor trainer, functioning of ct, pt and isolation transformer complate trainer, voltmeter and ammeter method for measurement of medium resistance., clamp meter, dc, ac & wave shaping circuit trainer, oil testing kit, transformer trainer 300 va, dc motor coupled to dc motor trainer, 3 phase squirrel cage induction motor trainer, single phase ac inducation motor trainer, dc motor coupled to 3 ph ac motor trainer, 3 phase ac integrated motor coupled to dc integrated motor setup (motor-generator setup):, electrical load power factor trainer (apfc), complete house wiring installation trainer, 3 phase squirrel cage induction motor trainer, control of 3 ph. squirrel cage induction motor trainer, 3 phase slip ring induction motor trainer, 1 ph. ac induction motor trainer, 3 phase salient pole alternator coupled to dc integrated motor setup (motor-generator setup) trainer, ac servo motor trainer with pid controller, dc servo position control trainer with pid controller, measurement of linear displacement by lvdt transduser trainer, strain gauge transduser trainer, temperature sensing transduser trainer, pressure measurment by piezo resistive transducer trainer, angular speed measurement using stroboscope & tacho meter transduser trainer, op-amp trainer, adc & dac circuits trainer, pelton turbine trainer (assemble & dismantle of micro hydro plant), microcontroller trainer 8051, solar and wind turbine trainer, fuse & mcb characteristics trainer, air circuit breaker trainer (dismantle acb), induction type electromagnetic relay trainer, electromagnetic over current reley i numerical relay trainer, percentage biased differential relay trainer, motor fault simulator trainer, on transmission line protection simulation trainer., lcr meter, digital multimeter, tachometer, wire striper, pliers, ball pen hammer, earth tester, took kit, soldering iron 25 watt with lead

State Government

CTN :39168841

19 Feb, 2025 NA

Dumka - Jharkhand

Tender For rate contract for hospital machine equipments hospital furnitures etc. (group- d) - list, autoclave horizontal 150 ltr. (capacity- 150 ltr., chamber dimensions- 400x1200 mm, construction- ss 304, load- 9 kw, operating pressure- 1.2/2.1 kg/cm operating temp- 121 c, voltage- 440 v, features- triple walled construction, hydraulic tested up to 40 psi, working pressure- 15 to 30 psi, automatic low water cut- off device, analog or digital pressure display, high quality door gasket, stainless steel construction, working temp- up to 134 c, radial locking system, reliable pressure release valves, digital temprature cum timer controller, stainless steel lid,), autoclave horizontal 75 ltr. (capacity- 75 ltr., chamber dimensions- 400x600 mm, construction- ss 304, load- 6 kw, operating pressure- 1.2/2.1 kg/cm operating temp- 121 c, voltage- 440 v, features- triple walled construction, hydraulic tested up to 40 psi, working pressure- 15 to 30 psi, automatic low water cut- off device, analog or digital pressure display, high quality door gasket, stainless steel construction, working temp- up to 134 c, radial locking system, reliable pressure release valves, digital temprature cum timer controller, stainless steel lid,), autoclave vertical 22 ltr. internal tank capacity- 22 ltr. load- 2.00 kw, chamber dimension- 10"x18", construction- double/triple wall & ss gmp construction, outer chamber- mild steel (304 stainless steel-optional), inner chamber- 304 ss (316/316l grades ss- optional), insulation- glass wool, waste container-ss, door/lid-foot lifted with safety and interlock device, door locking type- radial type, water filling & removal manual, safety features- radial locking, safety value, low water detector. and pressure interlock. accessories- pid, controller, low/high water cut-off device, digital alarm, temp.chart rcorder, dot matrix printer, rs 232/usb pc connection port, stainless steel wire mesh carrier, nabl certification, dressing drum, sterilization indicator tape, autoclave bag, plc control system, iq/oq/pq documentation., power supply- 220/440 volts., autoclave vertical 40 ltr. internal tank capacity- 40 ltr. load- 3.00 kw, chamber dimension- 12"x22", no. of drums & sizes- 2 (9"x11") construction- double/triple wall & ss gmp construction, outer chamber- mild steel (304 stainless steel-optional), inner chamber- 304 ss (316/316l grades ss- optional), insulation- glass wool, waste container-ss, door/lid-foot lifted with safety and interlock device, door locking type- radial type, water filling & removal manual, safety features- radial locking, safety value, low water detector. and pressure interlock. accessories- pid, controller, low/high water cut-off device, digital alarm, temp.chart rcorder, dot matrix printer, rs 232/usb pc connection port, stainless steel wire mesh carrier, nabl certification, dressing drum, sterilization indicator tape, autoclave bag, plc control system, iq/oq/pq documentation., power supply- 220/440 volts., autoclave vertical 95 ltr. internal tank capacity- 95 ltr. load- 4.00 kw,chamber dimension- 18"x24", no. of drums & sizes- 2 (12"x15") construction- double/triple wall & ss gmp construction, outer chamber- mild steel (304 stainless steel-optional), inner chamber- 304 ss (316/316l grades ss- optional), insulation- glass wool, waste container-ss, door/lid-foot lifted with safety and interlock device, door locking type- radial type, water filling & removal manual, safety features- radial locking, safety value, low water detector. and pressure interlock. accessories- pid, controller, low/high water cut-off device, digital alarm, temp.chart rcorder, dot matrix printer, rs 232/usb pc connection port, stainless steel wire mesh carrier, nabl certification, dressing drum, sterilization indicator tape, autoclave bag, plc control system, iq/oq/pq documentation., power supply- 220/440 volts., b.p. instruments dial type hg scale- 20 to 300 mm, hg resoulution- 2mm dimensions- 8.5x11.7x19

CTN :39152932

08 Feb, 2025 NA

Palacode - Tamil Nadu

Tender For supply of equipments for mechanical department - supply of equipments for mechanical department : [file no :121/a4/2025], behavior of proximity sensors each of inductive and capacitive type proximity sensor output drive to relay circuit built in power supplies and wooden closed cabinet, ldr characteristics trainer kit to carryout ldr characteristics experiment by varying the intensity of the light provision to vary the light intensity and measuring with lux meter provision to connect voltmeter and ammeter in the ldr circuit built in power supply and wooden closed cabinet, speed control of dc motor using optical sensor 24v dc motor variable speed circuit slotted plate fitted in the shaft of the motor opto interrupter to sense the slot to use the speed of dc motor measured the pulse frequency to voltage converter circuit, arduino trainer kitarduino uno micro controller : a tmega328p.on board sensor component 4no s of led 2no s of push switch one number of 5v relay and buzzer one number of buck converter for 5v one number of 2 x 16 liquid crystal oscillator (lcd) one number of mini breadon board sensor module one number of ultrasonic sensor module (3cm-100cm) one number of soil moisture sensor servo motor with potentiometer, test of dc motor using transistor relay to test of 5v dc motor using push button , limit switch , transistor and relay built in power supply and wooden closed cabinet

CTN :39154282

20 Feb, 2025 NA

Khandwa - Madhya Pradesh

Tender For supply and installation of biotechnology instruments - bod incubator with stabilizer:- features available in bod incubator - toughened glass window ,air circulation fan ,removable tray ,temperature,sensor ,door hinges ,pid temperature controller. 2 optional features available in bodincubator stainless steel perforated trays no of trays 3 air circulation motorized blowerexterior body material mild steel and painted in epoxy powder coating insulation material glass woolouter door material mild steel inner door material material of removable traytoughed glass material of removable tray stainless steel wire mesh tray chamber capacity(in ltr) 250-299 thickness of sheet (in mm ) 0.7 thickness of toughed glass/acrylic sheet (in mm ) 7 diameter of stainless steel wire in mesh ( in mm )3 temperature range 10 c to 70 c temperature accuracy 0.5 ctemperature uniformity 1 c., cooling centrifuge 20000 rpm with rotator head and stablizer :- type of motor brushless(without carbons)type of lid lock both manual and electronicno of acceleration and deceleration profiles in built for rotor speed while automatic brakingoption to accelerate and decelerate speed at various rates configuration of rotor supplied with centrifuge machine angle rotorsize of rotor supplied with centrifuge in ml"12x15ml(for angle rotor) rpm 13000"warranty period for equipment & roto condensed water drainage system,the equipment shall be installed and demonstrated before acceptance, servo controller voltage stabilizer supplied with item, deep freezer with stabilizer :- type vertical features puf insulation,frost free capacity ( l) >=250l temperature range in c -10 c to -40 c or better temperature uniformity in degree celsius +/- 3 c or lesstemperature stability of system in degree celsius +/- 3 c, rotatary shekar incubator with stabilizer :- castor wheels ,range of temperature5 degree centigrade to 60 degree centigradetype of display lcd, type of speed controlstepless continuously variable,orbital shaking amplitude in mm25 mm,type of flask which can be accommodated 100 ml ,250 ml ,500 ml ,1000 ml ,2000 ml, interior illumination led bulbs,construction of body double walled with inner and outer walls,door insulated double walled door with glass window,internal length of equipment in mm 765internal width of equipment in mm 660internal height of equipment in mm 650outer length of equipment in mm 1150ouiter width of equipment in mm 800outer height of equipment in mm 1300,range of temperature 5 degree centigrade to 60 degree centigradetemperature accuracy plus minus 0.5 degree centigradetemperature controller microprocessor based digital temperature controller and indicatortype of sensor pt -100,ype of motor brushless motorshaking mechanism controller microprocessor controllerorbital shaking speed in rpm upto 250type of speed control stepless continuously variableincrement of step variation 10orbital shaking amplitude in mm 25 mmtimer adjustment in hours 99, autoclave vertical :- chamber capacity/size approx. 80-120 litersoperating pressure 15 - 20 psipressure gauge type analog pressure gauge (0 - 400) psi temperature accuracy +/- 0.5 c (at 121 c)operating temperature (max) 123 c features automatic start/stop timer,low water level heater cut-o and alarms,over pressure cut-o with audio-visual alarm,low heat warning,inner temperatureindicator,over temperature cut-o with audio-visual alarm,door cannot unlock until chamber pressure reaches room pressure,temperature calibrationfunction spares & accessories perforated corrosion free basket made up of ss 304 (3-4 nos) that arestackable two high or more levelsadditional requirement calibration certicate from iso17025 accredited lab for temperature,pressuregauges & timer, heating element multicombine:- power source electric material ceramicapplication heating shape rectangulardimension diameter 200 millimeterwidth 200 millimeter thickness 8 millimeterlength 600 millimeter specications resistance 5 operating power 100 kilowatt

CTN :39113341

07 Feb, 2025 53.03 Lacs

Aurangabad-Mh - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - delivery at iti chh sambhajinagar; schedule1; no,repair, maintenance, and installation of plant/ systems/equipments (version 2) - delivery at iti chh sambhajinagar; schedule1; no,repair, maintenance, and installation of plant/ systems/equipments (version 2) - delivery at iti chh sambhajinagar; schedule1; no,repair, maintenance, and installation of plant/ systems/equipments (version 2) - delivery at iti chh sambhajinagar; schedule1; no,repair, maintenance, and installation of plant/ systems/equipments (version 2) - delivery at iti chh sambhajinagar; schedule1; no,repair, maintenance, and installation of plant/ systems/equipments (version 2) - delivery at iti chh sambhajinagar; schedule1; no,repair, maintenance, and installation of plant/ systems/equipments (version 2) - delivery at iti chh sambhajinagar; schedule 2; no,repair, maintenance, and installation of plant/ systems/equipments (version 2) - delivery at iti chh samb - steel rule-150mm,graduated both in metric and english unit , plier flat nose 100mm , hammer ball peen 250gms.with handle , screwdriver set of 5 pieces , adjustable spanner different sizes , neon (phase) tester 230 volt 05nos. , electric soldering iron 15/25watt pencil tip , tube cutter , allen key set (metric) set of six. , allen keyset(english set of six , soldering station temp. controlled , screwdriver 200mm , philips screwdriver 200mm , round nose pliers 150mm , fire extinguishers , wire type strain gauge (load cell/cantilever beam) , load cells of various ranges , digital type tachometer , digital panel meters voltage & , current , digital line frequency indicator , d.c. regulated power supply , digital insulation tester , digital multimeter , 51/2 digit bench top digital , multimeter , digital l.c.r. bridge , dso , decade resistance boxes , decade capacitance boxes , decade inductance boxes , operational amplifier trainer , trainer on basic digital electronics , trainers on power supplier's half , wave rectifier, full wave rectifier , scr driven/controlled power , discrete component trainer with , following seven basic modules , trainer on rs485 to rs232 , converter. , potentiometer/thermocouple test , set , auto transformer1and3 , calibration test bench for ac , and dc voltmeter, ac and dc , ammeter, ohmmeter , u tube manometers , well type manometer , inclined limb manometers , bourdon tube type gauges of , various ranges , capsule type pressure gauges , dead weight tester & comparator , pressure regulators with filter and , input & output gauges , differential pressure , transmitter (pneumatic) , differential pressure transmitter , (electronic-hart/field bus type , sensor trainer kit containing , following sensors , diaphragm type pressure gauges of , various ranges , pressure transducers training kits , experimental setup for pressure , measurement , hart device communicator and , calibrator , pneumatic calibrator , pressure switches of various ranges , p to i and i to p converters training , platform , vacuum tester with pump , vacuum gauge , simple tank type quantity meter , impeller type flow meter , helical and turbine flow meter , orifice type flow meter , venturitube flow meter rota meter , magnetic flow meter , vortex flow meter , flow control loop set with flow , controller recorder, , complete experimental set-up for flow measurement flow , measurement , experimental closed loop set up for , solid flow measurement , coriolis mass flow meter , flow nozzle , static pressure and air purge , type level indicator , level transmitter , interface)(hart/field bus/profi , bus compatible/rs485 ) , level control set up with level , transmitters controller & control , valve complete experimental setup , or level simulator , level measurement equipment for , solid, sonic solid level, microwave, , capacitance probes, point level , detector, vibrating for k type , mercury in glass thermometer ,

CTN :38880858

05 Feb, 2025 24.63 Lacs

Baran - Rajasthan

Tender For corrigendum : supply of esp electrical spares at 2x660 mw csctpp, chhabra - rapper controller - power module ador part no 6000012080 or equivalent , rapper controller - card cage ador part no 6000012130 or equivalent , rapper controller - output cards ador part no 6000012090 or equivalent , doc-iv microprocessor transformer rectifier controller of esp ador part ?? 6000011270 or equivalent , control transformer rk-1456, primary: 0-600v secondary: 0- 20v ador part no 4206007440 or equivalent , scr module, piv- 1400, thyristor module i(av)- 500a ador part no 4401001040 or equivalent , control transformer 415v/110v data-628 ador part ?? 4206006210 or equivalent , thermostate operate at 100 +/- 3 deg c ador part no 6000002590 or equivalent , the mcal -1 meter calibration card for ma ador part no 4601007510 or equivalent , mcal - 2,3 meter calibration card for kv ador part no 4601007120 or equivalent , hv dc voltage/current feedback assembly ador part ?? 4610009490 or equivalent , rapper controller panel - space heater with the thermostat ador part no 4210000110 or equivalent

CTN :38891938

06 Feb, 2025 24.63 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of esp electrical spares at 2x660 mw csctpp, chhabra - rapper controller power module ador part no 6000012080 or equivalent, rapper controller card cage ador part no 6000012130 or equivalent, rapper controller output cards ador part no 6000012090 or equivalent, doc-iv microprocessor transformer rectifier controller of esp ador part no 6000011270 or equivalent, control transformer rk-1456, primary: 0-600v secondary : 0-20v ador part no 4206007440 or equivalent, scr module, piv-1400,thyristor module i(av)-500a ador part no 4401001040 or equivalent, control transformer 415v/110v data- 628 ador part no 4206006210 or equivalent, thermostate operate at 100 +/- 3 deg c ador part no 6000002590 or equivalent, the mcal -1 meter calibration card for ma ador part no 4601007510 or equivalent, mcal - 2,3 meter calibration card for kv ador part no 4601007120 or equivalent, hv dc voltage / current feedback assembly ador part no 4610009490 or equivalent, rapper controller panel - space heater with the thermostat ador part no 4210000110 or equivalent

Roll Plug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government