Latest rolling brush Tenders | Government rolling brush Tenders

Central Government And Public Sector

CTN :42123496

21 Oct, 2025 67.01 Lacs

Najibabad - Uttar Pradesh

Tender For supply of materials and job work under the work of mc ew c of am special repair to conservation and restoration of entrance gateway of portion of old palace najibabad bijnor 2025 26 - items to be executed, u.s. lime, surkhi, coarse sand, lakhori brick, brick aggregate, sal wood, belgiri, gum, gur, demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge., demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 15.2.1 nominal concrete 1:3:6 or richer mix (including equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in charge. 15.7.4 in cement mortar, taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 of area 3 sq. metres and below, dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 of sectional area 40 square centimetres and above, providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. ( including errection & dismental after work), disposal of rubbish/malba heap,soil etc. from monument to outside of municipal limit by tractor trolly including excavation loading and unloading etc.requirement proper completion of work at monument /site, provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 0.90m. the pit is divided in to three parts & cement plaster, painting (two or more coats on new work) with oil type wood preservative of approved brand and manufacture, painting(one or more coats) with black japan paint of approved brand and manufacture to give an even shade

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

State Government

CTN :42129938

06 Oct, 2025 1.31 Lacs

Jaipur - Rajasthan

Tender For work of fitting child friendly toilet with water in the toilet.. work of fitting tap system, work of fitting tap for water supply from the tank, work of repairing broken doors/windows, work of installing slabs in the kitchen, work of painting and distemper in anganwadi, work of developing children park.

State Government

CTN :42129939

06 Oct, 2025 2.07 Lacs

Jaipur - Rajasthan

Tender For electrical fitting work, child friendly toilet with water fitting work in the toilet.. fitting work of plumbing system, fitting work of tap for water supply from the tank, repair of cracks in the roof, repair of broken doors/windows, slab repair work in the kitchen, work of fixing broken floor, child painting and distemper work in anganwadi

State Government

CTN :42119548

01 Oct, 2025 2.29 Crore

Patna - Bihar

Tender For annual repair,operation maintenance and two times painting of 21 nos. balwaghat barrage gates (4 nos under sluice gate size 2.20m x 4.05m, 15 nos. spillway gates size 3.00m x 2.55m , 2 nos. head regulator gate(left+right) size 3.50m x 2.66m along with their hoisting system, its allied components all panels and control room for next five years from financial year 2025-26

Central Government/Public Sector

CTN :42133660

06 Oct, 2025 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 13 )items as given below ,[1] repair of door. 4.000 ea,[2] repair of entire front wall. 2.000 ea,[3] repair of mid support crown structure. 2.000 ea,[4] rep. of floor plates and support structu 2.000 set,[5] repair of end wall. 4.000 ea,[6] repair of beam. 2.000 set,[7] repair of head stock area. 4.000 ea,[8] repair of cross beam. 4.000 ea,[9] repair ofcross members. 2.000 set,[10] servicing of bogie. 4.000 ea,[11] servicing of pneumatic system. 2.000 set,[12] repair of door opening mechanisms. 2.000 set,[13] painting of hot coke car. 2.000 ea

CTN :42134207

13 Oct, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of ingfare six mm , pipe , pati six mm , nut and bolt , nut and bolt with washer , nut and bolt lock and pin , hinges , wheel , iron sheet four mm , iron role pipe , denting painting , lock system , lock hook system , welding rod and iron cutter plate

Central Government/Public Sector

CTN :42126327

24 Oct, 2025 NA

Bikaner - Rajasthan

Tender For rehabilitation of trd accessories like bonds, various boards, ohe data stenciling etc. by replacement and painting, automation of lighting at psi installations & improvement in reliability of 25 kv ohe system over bikaner div.

Central Government/Public Sector

CTN :41778863

08 Oct, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - supply and application of corrosion protection coating system (painting) hwbf (m) at rcf trombay unit.

Central Government/Public Sector

CTN :42111074

14 Oct, 2025 12.70 Lacs

Mysore - Karnataka

Tender For repairing to windows, providing water proofing to terrace, balance work of cattle trap, repair to toilets & water supply system, painting, construction of sump tank, fish tank and other essential repair works in two buildings of phc at hagalahalli in maddur taluk, mandya district.

Rolling Brush Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors