Latest roof scrap Tenders | Government roof scrap Tenders

Central Government And Public Sector

CTN :43462443

27 Jan, 2026 45.19 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and job work under special repair to restoration and conservation of tomb of saiyed saif khan and his mother majhera muzaffarnagar 2025 2026 - items to be executed, unslaked lime, surkhi, c. sand, gur, belgiri, gum, brick aggregate 20-25 mm, 2nd class brick, kakkar stone, white marble, 65mm thick red sand stone 10 sqm, grey/white sand stone, rr stone, 65mm thick red sand stone 10 sqm (for arch), lakhori brick, tile bricks, mud including top finish, kail wood sleeper, raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge., ruled/ flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {one lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (the rate is inclusive of all materials & labours involved except scaffolding)., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineerin- charge., providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works., "earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kinds of soil.", surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 all kinds of soil, "demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix)", provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 1.00m. the pit is divided in to three parts & cement plastere, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, provision for the purchasing of essential article and t & p for the proper execution of the work i) pvc sheet, ii) pvc pan (tasla), iii) hammer with handle 1kg, iv) iron chisel 4",6", 8", v) pvc bucket, vi) pvc mug, vii)wire & coir brush, viii) wire & coir brush, ix) gum boot pvc in pair, x) pvc pipe 1", xi) wooden handle (fawra, hammer), xii) first aid box with medicine, provision for drawing and documentation charges including inspection of exis

State Government

CTN :43480717

19 Jan, 2026 1.80 Crore

Ranchi - Jharkhand

Tender For 318/supply of electric line materials - electrical items :, 33 kv v cross arm ( 9 mtr, 400kg psc pole) (100x50x6mm) [galvanized], back clamp for v cross arm ( 9 mtr, 400kg psc pole) ( 50x6mm) [galvanized], pole top bracket (400kg psc pole)(100x50x6mm) [galvanized], back clamp pole top bracket (400kg psc pole) ( 50x6mm) [galvanized], 11kv v cross arm ( 8 mtr, 200kg psc pole) (75x40x6mm) [galvanized] [galvanized], back clamp for v cross arm (200 kg psc pole) ( 50x6mm) [galvanized], pole top bracket ( 8 mtr, 200kg psc pole) (75x40x6mm) [galvanized], back clamp for pole top bracket (200 kg psc pole)( 50x6mm) [galvanized], 11 kv hg fuse set channel (75x40x6mm) [galvanized], support clamp for hg fuse set channel[galvanized], transformer base channel( 100x50x6 mm) 2800 mm long )[galvanized], support clamp for transformer base channel(50x6mm) [galvanized], 11 kv top channel ( 100x50x6 mm) (3200 mm long) [galvanized], support clamp for top channel(50x6mm) [galvanized], 11 kv line dp channel (75 x40x6mm) 2800 mm long) [galvanized], support clamp for 11 kv line dp channel[galvanized], 33 kv line dp channel (100mm x 50mm x 6mm) 3150 mm long) [galvanized], support clamp for 33 kv line dp channelfor 400 kg psc pole [galvanized], 11 kv cross bracing for d p structure (50x50x6mm) [galvanized], clamp for11 kv cross bracing[galvanized], 33 kv cross bracing d p structure (50x50x6 mm) [galvanized], clamp for 33 kv cross bracing[galvanized], lt angle bus bar with clamp(50x50x6mm) [galvanized], d.p channel support clamp (50x6 mm) for 8 mtr 200kg psc pole [galvanized]

Central Government And Public Sector

CTN :43458957

27 Jan, 2026 1.98 Crore

Rawatbhata - Rajasthan

Tender For supply , storage, handling, erection, installation, commissioning and testing of electrical equipment like power and control cable ,cable trays and supports lighting system and earthing system at rr site in oesc system. - supply and installation of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (raps-1to8/ 01652/2053/ga) and reference drawings nos. kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 (22 mm dia) first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 (22 mm dia) rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos. of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, supply and installation of following sizes of 1100v rated, cu conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed un-armoured power cables along with wooden cable drums, 3cx2.5 sq.mm, 4cx2.5 sq.mm, 2cx2.5 sq.mm, supply and installation of following medium duty gi pipes/ heavy duty erw rigid conduits for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, supply and termination / connection of following types and sizes of 415v power cables at both ends along with cable glands, lugs, ferrules, clamps, hardware etc., and drilling of gland plates, crimping of lugs for termination of following cables (source end & load end considered separately)., supply of 3.5cx300, al, unarmoured, supply of 3.5cx185, al, unarmoured, supply of 4cx16, cu, unarmoured, supply of 3cx6, cu, unarmoured, supply of 4cx2.5, cu, unarmoured, supply of 3cx2.5, cu, unarmoured, supply of 2cx2.5, cu, unarmoured, termination / connection of 3.5cx300, al, unarmoured, termination / connection of 3.5cx185, al, unarmoured, termination / connection of 4cx16, cu, unarmoured, termination / connection of 3cx6, cu, unarmoured, termination / connection of 4cx2.5, cu, unarmoured, termination / connection of 3cx2.5, cu, unarmoured, termination / connection of 2cx2.5, cu, unarmoured, supply and termination of lugs for the following power cables (suitable bi-metallic connector shall be provided for termination of aluminium cable on copper bus bar) (neutral core lug shall be of suitable size)., lugs for 3.5cx300, al, unarmoured, lugs for 3.5cx185, al, unarmoured, lugs for 4cx16, cu, unarmoured, lugs for 3cx6, cu, unarmoured, lugs for 4cx2.5, cu, unarmoured, lugs for 3cx2.5, cu, unarmoured, lugs for 2cx2.5, cu, unarmoured, supply and installation of mortar based fire stops and fire break for all floor & wall openings of cable trays and in the run of cable trays and for sealing of electrical conduits including supply of structural steel support material if required., supply of 3 hr. rated fire stop for cable penetration in floor/walls + fire stop for cable/wire conduits & pipe sleeves, supply of 30 minute rated fire retardant compound (fire break) over cable, installation of 3 hr. rated fire stop for cable penetration in floor/walls + fire stop for cable/wire conduits & pipe sleeves, installation of 30 minute rated fire retardant compound (fire break) over cable, supply and installation of following sizes of gi conduits including supply & installation of all accessories like bends, elbows, couplers, hospital saddles, spacers, gi junction boxes, gi pull boxes, etc., and other accessories required to complete the job on wall/ column/ ceiling etc. as per specification and drawings. (the run

CTN :43440008

13 Jan, 2026 NA

Chungthang - Sikkim

Tender For name of work: supply of ds ojl - 1. puf insulated prefab modular jco living shelter (double storey) of size 23.40x6.10m including 1.5 m wide veranda with specification and drawing schedule of structure as per tender documents( rfp).1.1 store list of structure items & construction materials, electrical & plumbing items and furniture items as per tender document in page no 47 to 58 as per tender documents.

State Government

CTN :43479883

13 Jan, 2026 9.93 Lacs

Midnapore - West Bengal

Tender For supply, loading at factory, transportation of lt distribution kiosk for 25 kva transformer (smc/frp) structure to kharagpur divisional store under kharagpur division wbsedcl, including guaranteed obligation of complete supply of materials

State Government

CTN :43480011

13 Jan, 2026 6.21 Lacs

Midnapore - West Bengal

Tender For supply, loading at factory, transportation of lt distribution kiosk for 25 kva transformer (smc/frp) structure to midnapore divisional store under midnapore division wbsedcl, including guaranteed obligation of complete supply of materials

corporations/Associations/Others

CTN :43462944

21 Jan, 2026 19.61 Lacs

Karur - Tamil Nadu

Tender For supply of transformer structure materials for double 9mtr psc pole 400kg - 100 sets

Central Government/Public Sector

CTN :43392705

15 Jan, 2026 NA

Koderma - Jharkhand

Tender For etc of boiler and power cycle piping at 2x800 mw dvc koderma tpp stage-ii - koderma- etc of boiler including pcp, total price for entire scope of work as per tender no.: bhel/cpc/kod/blr_pcp/26/076 for section-i of package-a: unit # 1 - erection, testing, commissioning, trial operation & handing over of boiler and its auxiliaries including pressure part, non-pressure parts, power cycle piping, duct dampers and its support structure, rotating equipment, air pre-heaters, id/fd/pa fans, mills, refractory, etc including handling of materials at bhel / clients stores / storage yard and transportation to site, preparation of foundation, ndt, fixing of hangers & supports, application of lining, insulation, supply & painting, stenciling & labelling etc., at 2x800 mw dvc koderma tpp stage-ii.

corporations/Associations/Others

CTN :43432605

09 Jan, 2026 NA

Kolkata - West Bengal

Tender For auction sale of vertical storage tank with conical bottom- fixed roof,scrap kettle-500

Central Government And Public Sector

CTN :43375698

12 Jan, 2026 20.39 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution of the work under the work structure repairs of ground floor of safdarjung tomb, new delhi as specified in the boq

Roof Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors