Latest roof sheet Tenders | Government roof sheet Tenders

corporations/Associations/Others

CTN :41508588

14 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c

State Government

CTN :42122016

23 Oct, 2025 2.69 Lacs

Multi City - Chhattisgarh

Tender For change of damaged sheets and repair & maintenance of the roof shed (gi profile sheet) of various public building in colony at 2x500mw, abvtps cspgcl janjgir-champa.

State Government

CTN :42132578

23 Oct, 2025 2.69 Lacs

Multi City - Chhattisgarh

Tender For change of damaged sheets and repair & maintenance of the roof shed (gi profile sheet) of various public building in colony at 2x500mw, abvtps cspgcl janjgir-champa.

State Government

CTN :42133847

10 Oct, 2025 9.31 Lacs

Kasaragod - Kerala

Tender For general-department fund_2025- 26_infrastructure development works at cpo galimukha-repair works of office buildingrepair works of roofing sheet of staff quarterconstruction of roof for recirculatory aquaculture system-general civil work

Central Government/Public Sector

CTN :42135033

25 Oct, 2025 48.55 Lacs

Jummu - Jammu And Kashmir

Tender For special repair to bld no t-157 (single igloor) of 2204 ap birpur at ratnuchak mil stn and special repair/ replacement of asbestos roof sheet to galvanized roof sheets with fase ceiling for certain 09 x bldgs of 426 fd hosp at bd bari mil stn under ge

Central Government/Public Sector

CTN :42114449

18 Oct, 2025 49.90 Lacs

Poonch - Jammu And Kashmir

Tender For repair/ maintenance of lt overhead conductor, ug cable, lt panel and allied accessories in the aor of age b/r-i and repair and maint of ht line at mendhar and repair to roof sheet, roof treatment, false ceiling, sanitary fittings, aluminium work, glazing, wall panelling, wall and floor tiles and painting including internal wiring at surankote, k nallah, kg top, lkg and jhallas under age b/r-iii under ge 881 ews.

Central Government/Public Sector

CTN :42114436

28 Oct, 2025 94.98 Lacs

Delhi - Delhi

Tender For repairs/replacement to roof treatment, plastering, roof sheet, trusses, joinery, plumbing, sanitary, periodical services & other connected misc work for ot, icu, adm bldg, offrs mess and other otm/md accn in zone a bhdc under ge (east) delhi cantt-10

CTN :42119703

11 Oct, 2025 NA

Senapati - Manipur

Tender For supply of rawal plug 40mm long , bracket for whb , extention nipples 15mm x 50mm , hex nipple cp 15mm x 50mm , suspenders for for e-board ceiling , clips holder for e-board ceiling , e- board false ceiling size 60cmx60cmx4mm , glass panes 3mm , half threaded screw 35mm , full threaded screw 25mm , low plug 35mm , half threaded screw 25mm , sand coarse locally available best quality , fine aggregate sand for concrete , 20mm thick 2nd class hard wood planks clean swan 25cm wide and 2.40 to 3.00 mtr long , ditto but with waste hole of ptmt minimum weight 100 gms , wire nails of any size , aluminium extruded handle 100mm size , aluminium extruded barrel tower bolt 150mm , glue for lime , 12mm thick particle board , sheet assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket and railing 60mm long , french polish , distemper , 18mm pre laminated particle board, grade 2 quality, interior grade, commercial type , exterior emulsion paint weather proof of 1st quality isi marked of the following make - asian oblique apex ultima oblique berger oblique indigo , painting brush 10cm flat size , painting brush 7.5cm flat size , painting brush 2.5cm flat size , lime unslaked best quality fat lime , wooden screw 25mm to 40mm long size as reqd 100 nos per pkt , wooden screw 15mm to 20mm long size as reqd 100 nos per pkt , writing brush flat size no 1 , writing brush flat size no 2 , writing brush flat size no 3 , writing brush flat size no 4 , pvc bracket plain for 20mm dia rod , pvc bracket angle for 20mm dia rod , fancy bracket plain for 25mm dia rod , fancy bracket angle for 25mm dia rod , centre support for 25mm dia rod , lime colour blue in 100 ml packet , rubber cill door bottom , stell peg set of six , indigo platinum series fllow coat emulsion paint of isi marked of colour rred oblique grey oblique white oblique yellow etc. make - indigo oblique asian oblique berger oblique granostone , sand paper , scrapper , roller for paint , ppgi roof sheet corrugated , plain sheet , self tapping screws , wooden beading , spindle no 3 , spindle no 2 , hasp and staple , wooden battens n.exc 3 sqm , pvc lipping , f oblique cistern washer , f oblique cistern handle , bib cock washer all types , veneer board 8 feet x4 feet x1mm , wall rounted rectanglur glass sholves , 20mm nominal graded crushed stone aggregate //bid details 2 / 84

CTN :42125180

22 Oct, 2025 17.81 Lacs

Multi City - Multi State

Tender For procurement of cat b stores - wire brush 8" x 3", coir brush size 8" x 3" wood base consisting of 3 long coir strands placed in brush arranged in 8 column and 4 rows, mason thread, ms wire nails, size: 1/1.5", as per 15-723, specification rust free, ms wire nails, size: 2/2.5", as per is-723, specification rust free, ms wire nails, size: 3", as per is-723, specification rust free, ms wire nails, size: 4", as per is-723-specification rust free, ms wire nails, size. 5", as per is-723 specification rust free, ms wire nails, size: 6", as per is-723 specification rust free, pbs roll 1mtr width x 1mm thick x 20 mtz roll, make: superior quality, rope manila 20mm dia, rope manila, 30mm dia, rope manila, 40mm dia, bow handle 6", bow handle 4, glass pane 6'x3x4mm,, make: saint govain/si certification marked, glass pane 6'x4'x5mm,, make: saint govain/si certification marked, glass pane 2 x 1 x 3mm, make: saint govain/is! certification marked, frosted glass panes 30 cmx30cmx4mm, frosted pin headed glass sheet 4mm 91 x 1 mir, glass putty, make: jk/birla, pvc mosquito proofing mesh 15 mir roll, wire mesh 3mm roll of 15mir, wire mesh 6mm roll of 15mir, wire mesh 10mm roll of 15m, wire mesh 12mm roll of 15m, wire mesh 20mm roll of 15m (welded mesh), hessian cloth 54" width, hinges 4", with screw, make:bita/golden/girson/diamond/isi, hinges 2" with screw, make bita/golden/girson/diamond/isi, hinges 3" with screw, make bita/golden/girson/diamond/isi, ms bolt hinges/ butt hinges (100mm long), ms bolt hinges/ butt hinges (75mm long), m seal 100gm, ms screw size: 20mm (3/4") (100 nos/pkt), ms screw, size: 25mm (1") (100 nos/pkt), ms screw, size: 50mm (2") (100 nos/pkt), ms screw, size: 75mm (2") (100 nos/pkt), ms screw, size: 100mm (4") (100 nos/pkt), green cloth, curtain ring, wall putty (20 kgs pack), make: jk/berger, weather coat exterior primer 20 ltr drum, sunmica top wooden finish, size: ext, sliding ball with screw size: 10inch, sliding bolt with screw size: 8inch, sliding bolt with screw size 12inch, door stopper, size: 140mm, item discription: aluminium alloy body and toungh, anodised with hard drawn steel spring fixed in floor, tower bolt size: 8, tower bolt size: 6, brass tower bolt barrel type 150mm, brass lower bolt barrel type 100mm, door window handle 100mm, door window handle 150mm, hydraulic door closer make: godrej, sand paper 80no, sand paper 120no, sand paper 60no, wood primer make: shalimar, varnish 1 lir pack make: asian/pidilite berger, looking mirror 450x800mm, make gold plus/saint gobin/modiguard, while cement (1kg pkt) make jk/birla, floor tiles 1'x1'x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, floor tiles 2 x2 x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, wall tiles 8" x 12' make, somany/jhonson/kajaria/nitco/orient, wall tiles 1' x 1' cerarnic/vitrified), make somany/jhonson/kajaria/orient, pvc false ceiling panels,, colour : white, size: 10x10 long 6-8mm thick, with gi channel and concealed fixing arrangement to roof truss and top side of panels all fitment complete., make: sarah/raunaq/equivalent, drill bit 20mm, drill bit 18mm., drill bit 12mm, drill bit 5mm, plastic rope size: 10mm, gi wire 4mm, cornfirming to is-280: 2006, gypsum screw size 1 (100 nos/pkt) pvc door (out to out size 0.85 x 1.90 mtr), frame 50 x 47 mm made out of 5 mm plan colour pvc sheet reinforce with ms square tube incl pvc shuller 30 mm thickconssting of frame made out of ms tube for top and bottom rail with pvc sheet strip 20 mm width suitable pvc steel bedding complete indis 100 mm ss hinge-30 nos a/u handle 125 mm-02 nos a/u tower bolt 150 mm -02 nos, stainless steel hasp and staple 100mm, door stopper (brass/ordinary type), magnate catch, (make:, amar/mahamaya/crown), gas sparker (gas lighter), gas pipe (lpg), hinges 1" width 3" length, stainless steel curtain rod 20mm dia 1.5mtr length, stainless steel bracket (for 20mm dia curtain rod), stainless steel nobe (for dia curtain 20mm dia),

CTN :42133100

13 Oct, 2025 16.76 Lacs

Dharwad - Karnataka

Tender For painting to hospital and laying of pavers main door of the hospital and construction of ambulance shed and installation of roof sheet to old hospital at the primaty health centre in garag village of dharwad taluk of dharwad district

Roof Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector