Latest rope stand Tenders | Government rope stand Tenders

CTN :40363087

06 Jun, 2025 NA

Leh - Jammu And Kashmir

Tender For upgradation of existing volleyball court to synthetic volleyball court - synthetic turf flooring 50mm fifa pro quality with fifa certification , volleyball net , adjustable poles for net with weighted and movable roller at base , antiglare led sports light 500 watt aluminum body color temperature 4000k to 5000k beam angle 30 degree to 6 degree , poles for sports light height 25ft and material ms 5 inch round pipe minimum 3 mtr from court boundaries , galvanized steel mesh height 3 mtr free zone 7mtr from both end line 5 mtr from both side line pole ffor fencing spaced 3mtr apart with 01 entry gate of width 4ft height 6ft , repair of existing concrete surface prior to laying of synthetic turf , referees stand with seat on top and made with material ms and pp , paint for the paly area lining , lbour charges and transportation

CTN :40423805

31 May, 2025 NA

Darjeeling - West Bengal

Tender For construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter & battery

CTN :40403165

10 Jun, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of bullet proof glass - hdpe laminated sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms , shs 6 mm thick size 120x120mm x 2.1m long for column with holes as per tech spec , ismb 150 rsj 150 x 75 mm g1 3050mm long for beam conforming to relevant is as per tech spec att , ismb 150 rsj 150 x 75 mm g3 400mm long for beam conforming to relevant is as per tech spec att , ismb 125 rsj 125 x 70mm g2 3.0m long for beam conforming to relevant is as per tech spec att , 6mm thick ms plate 150x150mm for shs column incl welding and nuts and bolts , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , steel roofing trough of size 1700 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , ms hexagonal nuts bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg per rm black in colour and shall contain as per tech spec att , red oxide primer conforming to relevant is , synthetic enamel paint colour green ist quality conforming to relevant is as per tech spec att , thinner as per as per tech spec att . sample to be approved before supply. , dry distemper as per tech spec att. sample to be approved before supply , chalk whiting as per tech spec attsample to be approved before supply , paint brush 4 inch make amar or lucky sample to be approved before supply , pre fabricated double shutter steel door of size 1100mm x1950mm made out of 2mm thick ms black carbon sheet as per tech spec att , supply of swivel bullet proof glass glass 610mm x300mm size 72 mm thick as per tech spec att , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick as per requirement for flat surface , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is , manufacturing sand confirming to relevant is as per tech spec att , stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is as per tech spec att , rapidite quick setting liquid. , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 and 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob

CTN :40115469

03 Jun, 2025 3.06 Crore

Jhalrapatan - Rajasthan

Tender For corrigendum : supply of spares for esp - collecting system, drg. no. gid-118-4f267-1, shock pad/head, en8, u-clamp for collecting electrode, is2062, bush for shock bar concave, en8, bush for shock bar convex, en8, sleeve/bush, is2062, lower horizontal plate, is2062, collecting rapping, drg. no. gid-118-4f267-2, bushing/ sleeve (to connect the shafts), is2062, shaft coupling (1), is2062, shaft coupling (2), is2062, rapping hammer assembly, is2062, en8, adjusting ring, is2062, internal bearing (two roller), en8, internal bearing (four roller), en8, emitting system, drg. no. gid-118-4f267-3, barbed wire, is2062, spinule (barbed electrode type-2), is2062, spiral wire, ss3161, support insulator heater 1.5 kw, ceramic, support insulator heater 1 kw, ss304, emitting rapping, drg. no. gid-118-4f267-4, antidust cover, is2062, en8, bearing for vertical shaft (three roller), en8, bush for vertical rapping shaft (three roller bearing), en8, minor pin wheel, is2062,en8,en19, major pin wheel, is2062,en8,en19, internal bearing (four roller), en8, internal bearing (two roller), en8, bush for emitting horizontal shaft (for bearing), en8, shaft end, en8, support tray, is2062, en8, rapping hammer assembly, is2062, en8, adjusting ring, is2062, shaft insulator heater, ceramic, shaft casing (vertical bearing cover plate), is2062, en8, bearing 111211, chrome steel, sealing bush (vertical bearing base plate), en8, drive shaft (top of shaft insulator), en8, inlet gas distribution plate, drg. no. gid-118-4f267-6, perforated plate (4), is2062, hopper, drg. no. - gid-4f267-9, hopper heater, ss304, emmiting other spares, collecting electrode, 513 gd crca, top hanger for ce suspension frame forexisting ce with 18 hooks 75x75x8 mm, is2062, sleeve tube/ bush 16x50 mm, f210, nut & bolts m16xms110 mm l, ht, nut & bolt m30 ms 105 mm l, ht, washer m16, ht, washer m30, ht, nut & bolt m10 ms 20 mm l, ht, ce frame top size 65x65x6 support angle, is2062, beam for ce suspension frame top 150x10000mm, is2062, shock bar guide supporting channel 150x10000mm, is2062, shock bar guide supporting channel 100x10000mm, is2062, angle 65x10000 mm, is2062, gas guide plate hopper 650x2000x3.15 mm, is2062, ee frame top size 60x40x3 box channel with lower side connector l-5540, is2062

CTN :40419252

17 Jun, 2025 NA

Gorakhpur - Haryana

Tender For supply of draw hook beam reinforced for draw gear arrgt. to icf drg. no. t-2-1-602, alt. m/2, ite ms- 1 to 4 confirming to rdso specn. no. c-9509, rev.2 with amndt. no. 1 oct.2016. [ warranty pe riod: 30 months after the date of delivery ]

State Government

CTN :40072880

29 May, 2025 NA

Basti - Uttar Pradesh

Tender For corrigendum : supply of material and erection of equipments and structure for construction of 01 no. 132/33kv bay at 132kv sub-station harraiya under electricity transmission division-i, basti - supply, pale fencing, earthing 40 mm ms rod for main earthing, earthing 40 mm ms electrodes ( 3 meter longs), m.s. flat for earthing 75x10, m.s. flat for earthing 50x6, air conditioning system, two ton window ac with all accessories and stabilizer(not less than 5kva capacity) with installation, single tension fitting suitable for, acsr moose, acsr panther, single suspension fittings suitable for, acsr moose, acsr panther, pg clamp suitable for, moose/ moose, moose/panther, panther/panther, bus post clamp suitable for, panther, twin panther, moose, lightening fixture led luminaries type sl-di as per tech specifications, work, erection of main & auxiliary structure consisting of column. beam peak, mast etc and auxiliary structure of installation of cts, la etc. the job consists of shifting of all materials from store to site of erection and erection of structures as per drawing with the help of gi nut & bolts, flat & spring washer with matching the hole, cutting & matching of member if required, including cost of all men and t&p excluding gi structure nut & bolts to complete the work. gi structures, nut & bolts and washer will be provided by department free of cost., erection of 145 kv equipments, 145 kv bus/line and tandom isolator, 145 kv current transformer, 145 kv post insulator, 120 kv lightening arrestor, 145 kv ct junction box, 132 kv transformer (c&r) panel, 145 kv sf-6 circuit breaker, erection of 33 kv equipments, 33 kv vacuum circuit breaker, 33 kv isolator, 33 kv current transformer, 33 kv lightening arrestor, 33 kv ct junction box, stringing of three phase jack bus 132 kv with panther conductor. the work includes cutting & bending of conductor, fixing of single/double bolted type tension fitting/suspension. hoisting of disc insulators and shifting of material from store*site to erection site and all other associated work to complete the job satisfactorily as per instruction of engineer incharge., 132 kv jack bus for transformer, 132 kv making of u jumpers, equipments interconnection jumpering with main bus bar. job includes bending of conductor in proper shape tightening with the help of clamps and all other associated work to complete the job., transformer bay for 132 & 33 kv side, laying and termination of following size control cable in trench/cable trays from different control room c&r panels to switchyard equipments (132/33 kv cb, ct their junction boxes . transformer marshalling etc) in 132/33 kv switchyard as per cable schedule including carriage of cable drum from store and all other associated work., 2cx2.5mm2, 4cx2.5mm2, 6cx2.5mm2, 10cx2.5mm2, termination of control cable ( per termination), cutting strengthening bending and laying 700 mm/500 mm below inside ground and above ground of following size m.s. flat for earthing of main and auxiliary structure and equipments including welding with main earth mat and with objects to be earthed, excavation trenches and back filling painting and all other associated work as required to complete the work satisfactorily. m.s. flat will be providing by the contractor free of cost., 75x10 mm, 50x6 mm, making delta earthing of 120 & 33 kv la by fabrication of 03 nos 3 mtr m.s. round bar ( 36/40 mm dia) electrode it piercing inside the ground and connecting all 03 nos electrodes with 36/40 mm m.s. round laying around as per drawing painting the jointing with 75x10 mm m.s. round bar laying around as per drawing. painting the joints with black japan paint of good quality after proper cleaning of joints by wire brush ms round bar will be provided by dept, free of cost., dismantling of 250k.va 33/0.4k.v station t/f work includes opening of jampers/cable connection/cutting of earthing etc., laying of 300/400mmsq. 3.5core power cable from

Central Government/Public Sector

CTN :38918795

28 May, 2025 4.29 Lacs

Angul - Odisha

Tender For corrigendum : supply of 1 - , tubes, jack nut, bottom cup, top cup, blade, bladed tube, press bent sheet, ms rod/ms flat, beam clamp, couplers, right angle coupler, swivel coupler, all items, boards, galvanization (wherever applicable)

State Government

CTN :39711388

29 May, 2025 13.27 Lacs

Multi City - Gujarat

Tender For corrigendum : supply & apply of m s material against damaged corroded platforms of various location of ccpp-i, ii & iii of dgbps... as & when required basis. - ms flat size 50x5 mm, ms angle size 40x40x5 mm, ms angle size 50x50x6 mm, ms angle size 75x75x6 mm, ms channel size 75x40x4.8 mm confirming to (is:2062)grade a quality having length of 09 to 12 mtrs. & under bis mark certification scheme., ms channel size 100x50x6 mm confirming to (is:2062)grade a quality having length of 09 to 12 mtrs. & under bis mark certification scheme., ms channel size 200x75x6.2 mm confirming to (is:2062)grade a quality having length of 09 to 12 mtrs. & under bis mark certification scheme., ms beam size:150x75 mm, ms beam size: 200x100 mm, ms beam size 250x125 mm, erection of grills at various location of ccpp-i, ii & iii as per instruction of eic, various safety related fabrication work ccpp-i, ii & iii of dgbps

corporations/Associations/Others

CTN :40401299

30 May, 2025 NA

Sirsi - Karnataka

Tender For auction sale of ms scrap-i rcc pole skeleton,ms scrap-ii ms scrap (rails /i beam),empty barrel,scrap acsr conductor and pvc cable,25kva,50kva,63kva,100kva and 250kva al winding distribution tran without oil,scrap energy meter

corporations/Associations/Others

CTN :40401300

30 May, 2025 NA

Sirsi - Karnataka

Tender For auction sale of ms scrap-i rcc pole skeleton,ms scrap-ii ms scrap (rails /i beam),empty barrel,scrap acsr conductor and pvc cable,25kva,50kva,63kva,100kva and 250kva al winding distribution tran without oil,scrap energy meter

Rope Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others