Latest rotary actuator Tenders | Government rotary actuator Tenders

State Government

CTN :45073295

18 May, 2026 1.22 Crore

Attabira - Odisha

Tender For supply of isi marked centrifugally cast (spun) ductile iron socket and spigot pipes in connection with the work improvement of water supply to attabira town

CTN :45063669

25 May, 2026 14.6 Thousand

Gorakhpur - Uttar Pradesh

Tender For supply of hydraulic oil pressure pipe , spigot brg , clutch assy , withdrawal brg , pressure plate

CTN :44923973

08 May, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of reservoir for former spigot as per drg. no. afk/sk- 653-10

CTN :45024401

19 May, 2026 NA

Paschim Medinipur - West Bengal

Tender For supply of pto shaft cross , head light relay , gear linkage bush kit , clutch disc , spigot bearing , housing gear lever , wiper blade , fuel pump assy unit , clutch face plate 14 inch , pressure plate , bearing roller , wiper blade assy , relay 12v , alternate assy , relay 3 point , cabinet light , clutch master cyl assy kbx , assy sleeve cylinder , accelarator cable spacio new , coil assy ignition , reverse light switch , hub seal

corporations/Associations/Others

CTN :45034145

20 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

Central Government And Public Sector

CTN :45002700

16 May, 2026 NA

Chittorgarh - Rajasthan

Tender For tender for supply of pyrolyser spares - quartz worktube (standard spigot and cone joint) work tube for pyrolyser (make raddec , model pyrolyser 6trio serial no f4696-2022) with glass end caps b29 (sockets) part no 300012 and 300002 , ptfe clip for cone / socket 29/32 clips for end caps part no 400002 for pyrolyser (make raddec , model pyrolyser 6trio serial no f4696-2022) , quartz glass boats deep sample boat part no 300007 for pyrolyser (make raddec , model pyrolyser 6trio serial no f4696-2022) , standard bubbler combined bubbler for trapping co2 , part no 300003/4 for pyrolyser (make raddec , model pyrolyser 6trio serial no f4696-2022) , rodavis complete trap , rodavis trap (standard ns29 connection with straight up spigot) for water trapping in cryocooler , part no 300015 for pyrolyser (make raddec , model pyrolyser 6trio serial no f4696-2022) , 0.3percentage pt-alumina catalyst pellets 1kg , 0.3percentage pt-alumina catalyst , part no 420003 for pyrolyser (make raddec , model pyrolyser 6trio serial no f4696-2022) , poly-urethane tubing , poly-urethane tubing 8mm (clear) of 1 m length , part no 220012 for pyrolyser (make raddec , model pyrolyser 6trio serial no f4696-2022) , silicone tubing , tubing (silicone) 6 mm bore 1.75 mm wall thickness (1 m length) part no 410001 for pyrolyser (make raddec , model pyrolyser 6trio serial no f4696-2022) , silica wool in 10gm pack for pyrolyser (make raddec , model pyrolyser 6trio serial no f4696-2022)

Central Government And Public Sector

CTN :45008923

18 May, 2026 12.14 Lacs

East Nimar - Madhya Pradesh

Tender For re-tender for supply of materials under m.c. and e.w. (con.of anc. mon.) special repair to hammam khana at burhanpur, distt. burhanpur (m.p.) - lime (quintal) (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), marble dust/ powder (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), surkhi (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), sand (narmda) (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), gum (babool) (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), batasha (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), belgiri (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), gur (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), coir string (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), nut bolts (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), bamboo chali (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), spraying machine (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), bonding agent (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), scaffodling setcup lock 3 mts. nb-40mmdia, 20, cup lock ledger 1.5mts nb-40mm dia 33, cup lock ledger2mts nb-40mm dia 33, bracing diagonal 4mts nb-40mm dia 12, base plate 0.3x0.3x5mm 10, laders 2mts 2, steel scaffolding boards 2x0.25mts 12, steel scaffolding bords 2x0.20 mts 12, toe boards 2x0.15mts 6, toe boards 1.5x0.15mts 6, swivel coupler 20, spigot nut bolt 20 (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder), transportation charges for 1 set scaffolding (6x6) (this provision is inclusive of gst hence no gst amount is to be quoted by the bidder)

State Government

CTN :45015798

28 May, 2026 32.85 Lacs

Kanker - Chhattisgarh

Tender For providing, laying and jointing socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (200 mm dia di k-9 pipe) conforming to is8329/2000 with suitable rubber gasket (push on) joints as per is:5382/85 including testing of joint (laying conforming to is 12288 : (200 mm dia di k-9 pipes.) & for balance work of old work orderwith latest amendment including valves & specials as per specification with materials including all allied civil works & trial run for three month under charama augmentation water supply scheme.

CTN :45024404

19 May, 2026 NA

Paschim Medinipur - West Bengal

Tender For supply of mt spares : - clutch slave cylinder , yoke prop shaft flange , throttle cable , indicator assy front , switch assy winker , starter motor assembly mgypsy , pressure plate smazda , gear shift cable smazda , gear selector cable smazda , brake master cyl assy smazda , clutch plate sml , cyl clutch master swm , door regulator window , vaccum brake booster , cylinder clutch master , pressure plate assy tata , spigot bearing tata , clutch plate with lining tata , clutch plate tata , withdrawl bearing carrier tata , pressure plate tata , uj cross tata , assy clutch release bearing with sl tata , assy clutch master cylinder tata , clutch slave cylinder tata , cable handle brake tata , hand brake operating lever assy tata , clutch cyl release tata , pneumatic pipe line , pto solenoid , driven gear speedo

Central Government / Public Sector

CTN :44998718

01 May, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of higher capacity air spring assembly (160kn) for lhb coaches having fiat bogie to rdso str no. rdso/cg/s/23002, rev.nil each air spring assembly consists of 6 items as under: s.no. item qty/set 1. air spring (rubber bellow) 1 no. 2. top interfacing plate with bolster, with spigot 1 no. 3. sealing o %u2013rings 2 nos. 4. base plate 1 no. 5. emergency spring 1 no. 6. mounting fasteners 4 sets specn: str no rdso/2020/cg -01 or lates [ warranty period: 60 months after the date of delivery ]

Rotary Actuator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government And Public Sector

Central Government And Public Sector

State Government

Central Government / Public Sector