Latest rotary hand pump Tenders | Government rotary hand pump Tenders

State Government

CTN :43497244

19 Jan, 2026 9.18 Lacs

Kullu - Himachal Pradesh

Tender For providing, testing and commissioning of 125 mm dia bore-well with 5.0 hp submersible pump and associated electrical and plumbing works at 132.220 kv gis substation, charor distt. kullu h.p.

State Government

CTN :43462166

16 Jan, 2026 5.75 Lacs

Kullu - Himachal Pradesh

Tender For providing, testing and commissioning of 125 mm dia bore-well with 5.0 hp submersible pump and associated electrical and plumbing works at 33 kv switching substation palchan manali under piu sarabai, distt kullu h.p.

CTN :43499751

15 Jan, 2026 22.2 Thousand

Kolkata - West Bengal

Tender For maintenance of electrical installation & fans i/c repair maintenance of pump sets, compound light with day to day replacement of electrical spare material with electrical wiring, plug point etc. and operation of lifts, fire fighting system & diesel generator set in 80 nos. type-iv qtr. in (g plus 10) storied building for income tax department at muchi bazar, ultadanga, kolkata during 2025-26 (sh: replacement of 3 phase submersible star delta pump starter).

CTN :43499737

15 Jan, 2026 10.95 Lacs

Delhi - Delhi

Tender For a/r & m/o and special repair to residential and non-rsidential building at iari pusa, new delhi. (sh: repalcement of mono submersible pump set and other electrical work at pump house area )

CTN :43499636

14 Jan, 2026 1.96 Lacs

Puducherry - Tamil Nadu

Tender For supply, installation, testing and commissioning of borewell submersible pump set with upvc column pipes in the existing borewell & ancillary works at pump room, icmr-vcrc, indira nagar, puducherry.subwork/packages:electrical

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43448164

27 Jan, 2026 NA

Port Blair - Andaman And Nicobar Islands

Tender For supply of electrical and rac items under capstone project of mechanical department at dr. b. r. ambedkar institute of technology (dbrait), sri vijaya puram - supply of electrical & rac items under capstone project, sliding gate motor with rack and pinion(power supply: ac 220v-240v ac, output torque: 27 n-m,motor speed: 1440 rpm, gate speed: 12 m /minute, maxgate weight: 1000 kg, noise: 56 db, limiting switch: springlimit switch, transmitter distance: 50 m, working cycle: 40%, ip class: ip44, operator: ac operator including controlboard, base plate and magnetic limit., remote control: 1 pair(2 nos.), transmitter 4 channels. photo cell: 1 pair (2 nos.)with input power: ac/dc 12-24v, detecting distance max: 15m, ip class: ip55., metal rack: 1 meter rack x 10 nos.,thickness: 09 mm. warranty: 01 year, pinion: 1 extra pinion), power supply cable(4 sq mm, 2 core, pvc insulated), open well submersible pump(5 hp, 65x65, suction / delivery, head range: 30-50 m, rpm: 2800, three phase, voltage: 415v, power rating - 7.3 kw, make: lubi/kirloskar/groundfos), rgb fountain light(s.s body, ip 68, waterproof, output cable length minimum 2 meter, 27 watt. with smps & controller), dol starter(5 hp, 3 phase, 415 v), solenoid valve(waterproof, ip68, s.s body, grade: 304, thread type, size: 1.5 inch, pressure range: 0.5-12 bar, operating voltage: 24 dc, solenoid valve(waterproof, ip68, s.s body, grade: 304, thread type, size: 1 inch, pressure range: 0.5-12 bar, operating voltage: 24 dc), dc smps(10 ampere, 24 volt), arduino- uno r3 board(standard), adapter(5v, 2 amps), relay module(6 output), compressor -r134 a(model name/number: cj513, motor power: 1 hp, capacity: 1 ton, phase : single phase), copper tube(diameter: 1/4 inch, length:15m), high pressure gauge(type: bourdons tube, dial size: 65mm, range: 0-550 psi, connection type:back mounted connection, glycerin filled, thread connection size:1/4 inch, end connection: male), low pressure gauge(type: bourdon s tube, dial size: 65mm, range: 0-550 psi,connection type: back mounted connection, glycerin filled,thread connection size :1/4 inch, end connection: male), digital ammeter(input signal: ac, range: 0-20 amps, supply: 230 v ac ), digital voltmeter(model: smp355, range: 0-300 v ac, display: 0-300 v ac, accclass 0.5, aux: 230 v ac), lp/hp cut out(model: type mp15, pressure range: low side: vacuum up to100 psi (-30 in hg to +100 psi), high side : 0 to 85 psi(approx.), adjustable differential : 0.6 to 7 kg/cm (approx. 9to100 psi) ), temperature indicator (nutronics auto scanner dtim-200m)(sensor input : pt-100, range: 200 degree celsius, supply :230 v ac with selector switch ( 0 - 9 ), refrigerant: freon r 134 a(450g, can), copper brazing rod(thickness - 2 mm), copper brazing rod(thickness - 3 mm), white brazing flux powder(standard, for copper), lpg (can)(225 ml ), capillary tube(internal diameter: 0.5 mm, material: copper), suction accumulator for r134 a(0.5 inch), liquid line filter drier(1/4 inch), capacitor(4 mfd), refrigeration shut off valve(diaphragm hand valve, size: 1/4 inch), wire(2.5 square mm, copper ), refrigerator thermostat(type : rotary adjustable thermostat, control range :1-9temperature range : 5 c to +10 c, power : 220 240 v ac,50 hz,), thermal insulation sleeve(length: 1 meter , inner diameter: 10 mm ), thermal insulation sleeve(length: 1 meter , inner diameter: 15 mm ), electrical insulation tape(standard ), condenser (heat exchanger)(condenser tube outer dia. : 3/8 inch, for 1 hp capacity , r-134a compatible), thermocouple with wire(temperature sensor rtd, pt-100, od: 6mm, length: 4 inch or100 mm)

State Government

CTN :43412470

09 Jan, 2026 6.98 Lacs

Multi City - Karnataka

Tender For annual maintenance & repairs of electrical accessories to pwd staff quarters in the premises of mahal-e-shahi guest house and annual maintenance & solar water heater system to pwd staff quarters in the premises of mahal-e-shahi guest house and providing & new submersible borewell with pump set & pipeline to pwd staff quarters in the premises of mahal-e-shahi guest house for the year 2025-26.

State Government

CTN :43340681

12 Jan, 2026 70.00 Lacs

Wayanad - Kerala

Tender For ridf xxviii - lift irrigation projects in various padashekharams of wayanad district- procurement of submersible pumpsets, fittings, accessories, and related electrical works - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses. - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses., supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontally mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day night operation.the pump discharge capacity of 230 cubic metre /hour against duty point head of 42 mtrs, working head range 18 - 47m, discharge range 136 - 57 lps ,speed 1450rpm(n) or nearer ,with 10meters of copper power cable and control cable, railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided with an additional iron grill for preventing foreign particles inside the inlet side of the pump casing., supply and erection of 60hp auto transformer starter (ats) with suitable incommer and contactors including 24 kvar capacitor with required indications ,metering and protections for single phasing ,overload, pump monitoring unit to protect from ingress, high temperature level etc enclosed in a closed panel board, supply and laying additional termination cable of 1.1kv 3.5 core 95sqmm aluminium conductor xlpe insulated ;steel armoured ug cable as per relevant is 7098 with support for cable, supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontzlly mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day nightoperation.the pump discharge capacity of 188 cubic metre /hour against duty point head of 35 mtrs,working head range 16 - 42m, discharge range 102 - 42 lps ,speed 1450 rpm(n) or nearer ,with 10meters of copper power cable and control cable,railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided with an addition

State Government

CTN :43051463

12 Jan, 2026 NA

Kheda - Gujarat

Tender For corrigendum : supply of various electrical consumable items for emd 3 & emd-5 at wtps, gsecl. - jyoti make voltage operated auxiliary relay type re-300, voltage: 220 v dc with 4 c/o contacts without plug in base with optional led indicator, plug in type relay make paramount coil voltage 110 v ac 50 hz., plug in type relay, "paramount" make, coil voltage - 24 v dc, with 2 c/o contacts, type-p3-2-pz-m-24 v dc with led & relay base., plug in type relay, "paramount" make, coil voltage- 240 v dc, with 3 c/o contacts, type-p3-3-fpzi -240 v dc with led & relay base., oks contact cleaner [ 2621 /2 ] size 500 ml [ 275 gms ] spray bottleman u oks speciality lubricants { india } pvt. ltd., wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, crc-226 contact cleaner in 415 ml/300 gram spray bottle., red insulating varnish-class f epoxy insulation & protection coating., becktol gray varnish in 1 ltr tin dr.back make, thinier 221, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., puff seal have polyurethene based foam sealing compound, silica gel blue 4 to 6 mm, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, mcb 4 pole, 32 amp, 440 volts, breaking capacity 10 ka, mcbs(3 pole+nutral) miniature circuit breker current rating 63amp., mcb 1 pole 25 amp,l 43125 ro, plug socket 6 amp 230v,5 hole, 3 pin plug top 6amp. 4657, single way switch 230 v, 6 amp. confirming is 3854., pvc adhesive insulation tape roll, ceiling fan capacitor, change over switch 63a x 415v x 4 pole, ictp switch 415 volts,100 amp. t.p. heavy duty., lighting panel with 18 outgoing c.k.t., supplied with double door,insulated busbar,insulated neutral bars,earth bar,cable ties,circuit identification lables, industrial padestal fan, wall mounting fan smart looks flexible tilting neck with toggle switch for oscillation control metal blades 230v 50hz. power saver., 4 pole, 100 amp, 415 volt, ac 23 a, 4p l&t make manual changeover switch ,disconnector, size fr1, catalogue no : co11000oooo, (conforms to iec 60947-3, is/iec 60947-3 ),type : open execution, push button station surface mounting type 3sb08 02-8ac, start-stop positions, siemens make, start push button green make:esbee ,230v,6a with n0 contact element, stop push button red make:esbee ,230v,6a with nc contact element, led type indication lamp, 22.5 dia, 240 v ac, red colour with lvgp, led indication lamp 22.5mm dia colour:-red voltage:-110vac make:-l&t cat no.:-eplr110a, 4 switch and 1 socket pvc switch board, 4 switch and 4 socket pvc switch board, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 2 switch pvc switch board, 3 core , 6 mm sq. flexible pvc insulated copper cable, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 50 mm dia. after shrink : 16 mm for 1.1 kv lt cable, pvc flat copper cable 3 corex35 sqmm for submercible pump, 1100 v grade, multi-stranded, unarmored flat copper cable, pvc insulated, for submersible pump, as per is 694, 1990 size :3 c x 70 mm2

Rotary Hand Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government