Latest rotary switch panel Tenders | Government rotary switch panel Tenders

Central Government/Public Sector

CTN :39884890

01 May, 2025 4.99 Crore

Delhi - Delhi

Tender For supply of information outlet , utp patch cord1 , utp patch cord2 , utp cable , rack1 , rack2 , jack-panel , l3-switch , switch1 , switch2 , sfp , patch cord , liu1 , liu2 , fiber cable , pvc pipe1 , pvc pipe2 , pvc pipe3 , pvc pipe4 , pvc channel1 , pvc channel2 , pvc duct1 , pvc duct2 , flexible pipe1 , flexible pipe2 , hdpe pipe , splicing , software , services

State Government

CTN :39889103

10 Apr, 2025 18.71 Lacs

Dalhousie - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing commissioning for sop to jsv for sewerage treatment plant by prov. 11/.4 kv 100 kva s/stn. at gosan a/w 11 kv ht/lt line , in section bharmour-1 under esd bharmour ed chamba - supply part 11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 200 kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no., ms angle iron (35x35x5 mm), length : 460 mm x 2 nos, ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles, copper thimble, danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-95mm sq., energy meter (3-phase, 4-wire) dlms compliant 1000/5a ct type for 63 kva transformer, alluminium paint, prov.acsr, 6/1/3.35 mm, prov. hp make aiq desktop model hp 200 g4 with intell core 3-10110u-10 gen.processor, 8gb ddr4 ram expenditure upto 16 gb, itb, hdo (t2qorpm)2st antiglare led desplay withfhd (1920x1060) integrated hd graphics & webcam, 2xusb, 3.0 2xusb, 2.0 cardreacer. audio part vgnhdmi/dp port, 10x100, 1000mcomdliant lan usb key board & mouse internalspl. connectivity bo2 11 b/g/n/ac pl windows etc. with three years on site warranty. (ii) 650va offline ups system with12vx7ahx2nos: 158vah/smf batteryto povide20 min. battery back upwith three year warrantyon ups &battery from delivery with printer, hp monocrom laser printer (a4) hp laser 108a with prints upto 20 ppm,64 mb ram 600x600 dpl print resolution 150 sheets paper tray capacity usb 2.0 port- one year waranty, beetal m88 plan phone (one set contains 2 nos phone), beetal m71n land line phone, 11 fin oil filled room heater make havel, prov. transformer plinth protection for 100kva s/stn structure a/w chain link fencing, angle iron gate etc. for dtr fencing., erection part 11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 200 kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no., ms angle iron (35x35x5 mm), length : 4

State Government

CTN :39889104

10 Apr, 2025 16.49 Lacs

Dalhousie - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing commissioning for sop to jsv for lis kakdolu by prov. 11/.4 kv 100 kva s/stn. a/w 11 kv ht/lt line , in section maredi under esd chamba-ii ed chamba - supply part 11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 200 kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no., ms angle iron (35x35x5 mm), length : 460 mm x 2 nos, ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles, copper thimble, danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-95mm sq., energy meter (3-phase, 4-wire) dlms compliant 1000/5a ct type for 63 kva transformer, alluminium paint, prov.acsr, 6/1/3.35 mm, prov. hp make aiq desktop model hp 200 g4 with intell core 3-10110u-10 gen.processor, 8gb ddr4 ram expenditure upto 16 gb, itb, hdo (t2qorpm)2st antiglare led desplay withfhd (1920x1060) integrated hd graphics & webcam, 2xusb, 3.0 2xusb, 2.0 cardreacer. audio part vgnhdmi/dp port, 10x100, 1000mcomdliant lan usb key board & mouse internalspl. connectivity bo2 11 b/g/n/ac pl windows etc. with three years on site warranty. (ii) 650va offline ups system with12vx7ahx2nos: 158vah/smf batteryto povide20 min. battery back upwith three year warrantyon ups &battery from delivery with printer, hp monocrom laser printer (a4) hp laser 108a with prints upto 20 ppm,64 mb ram 600x600 dpl print resolution 150 sheets paper tray capacity usb 2.0 port- one year waranty, prov. transformer plinth protection for 100kva s/stn structure a/w chain link fencing, angle iron gate etc. for dtr fencing., erection part 11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 200 kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no., ms angle iron (35x35x5 mm), length : 460 mm x 2 nos, ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transform

Central Government/Public Sector

CTN :39722251

09 Apr, 2025 3.95 Crore

Bhopal - Madhya Pradesh

Tender For corrigendum : tender for supply of l2 switch 48 port non poe gigabit and 4x10g sfp , l2 switch 24 port non poe gigabit and 4x10g sfp , l2 switch 24 port multigigabit (10g/5g/2.5g.1g) port , wireless access point indoor , sfp 10g module , wireless access point outdoor , cat6 cable (305 mtr box) , cat6 cable laying , 24-port patch panel , 24-port patch panel installation , fibre patch cord 2m , utp patch cord 1m , i/o box , i/o box installation , rack 12 u , rack 12u installation , rack 9u , rack 9u installation , liu , liu installation , fibre cable 6 core , fiber cable laying , fibre joint enclosure , fiber cable patch cord , electric cable 2 core , power socket 15 amp , 32 mm pvc conduit with accessories , 40 mm pvc conduit with accessories , 32 mm pvc casing with accessories , 40 mm hdpe pipe , 50 mm ms pole 20 ft isi mark , ups 10 kva

Central Government/Public Sector

CTN :39884518

29 Apr, 2025 NA

Kapurthala - Punjab

Tender For supply & installation of epdm modular based cable/ conduit sealing system for on-board panel of switch board cabinet in lhb non ac coaches., as per drawing: edml 228 rev. 0, corr-1, packing instruction: as per standard packing. it should be ensured that it em should not rub during transportation. the item should be packed with adequate st rength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 m onths after the date of delivery ]

State Government

CTN :39893091

11 Apr, 2025 59.1 Thousand

Alappuzha - Kerala

Tender For deposit-taluk hospital harippad,alappuzha-urgent replacement of manual changeover switch in msb panel of taluk hospital harippad alappuzha -general electrical work

Central Government/Public Sector

CTN :39883536

13 May, 2025 NA

Ajmer - Rajasthan

Tender For supply of rotary switch 16 amp ac 3 pole, three way with off, 4 position , 90 degree, front mounting, complete with knob and indicating plate, confirming to is:13947 (part i & ii ) & rdso specification no. elps/spec/ac/04 (rev-3) may-2009, similar to kaycee make type- srpm 139c, suitable for use in ac control panel of ac coaches, make rdso approved:-kaycee, salzer & siemens.

Central Government/Public Sector

CTN :38945435

07 Apr, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of training materials for different trade courses - annealed copper tube o.d. i.s.i. grade, flare nut (brass) i.s. grade, refrigerant 134a, 450 g container, refrigerant hc blend 170 g container, refrigerant 22, pin valve (non-return valve) o.d., brazing stck, brazing gas (butane) 220 g container, capillary tube 0.031 , (0.7 mm) i.d., dead nut e.d. (brass), terminal clip (motor), three-way hand shut o valve o.d., capillary tube 1.25 mm i.d. for ac, gas charging flexible pipe 3 long, dia., 450 psig, filter drier (pencil type) two leg type for refrigerator, o.d., m.s. flat (50 6) mm, m.s. pipe o.d. 50 mm 3 mm wt, m.s. electrode 3.15 mm, wooden hammer handle length 300 mm, 3 mm dia. g.i. wire, file handle (plastc) 4 , wooden mallet (round) dia. 70 mm length 125 mm, m.s. flat 50 mm 8 mm, m.s. flat 50 mm 10 mm, m.s. flat 65 mm 8 mm, m.s. flat 75 mm 10 mm, hacksaw blade 300 mm 12.5 m 24 tpi, mahogany wood -2 1 6 -0 , mahogany wood -2 1.5 6 -0 , mahogany wood -2 2 6 -0 , mahogany wood -3 1 6 -0 , mahogany wood -3 1.5 6 -0 , mahogany wood -4 1 6 -0 , mahogany wood -6 1 6 -0 , sal wood - 2 2 6 -0 , sal wood - 3 1 6 -0 , pine wood -2 2 6 -0 , pine wood -3 1 6 -0 , pine wood -6 1 6 -0 , gamari wood - 2 2 6 -0 , gamari wood - 2 2 6 -0 , m.s. round dia. 50 mm, m.s. round dia. 65 mm, m.s. round dia. 38 mm, m.s. flat 100 mm 10mm, grinding wheel (course a24 150mm 20mm 31.75mm) with bush (1 ), grinding wheel (coarse c24 300mm 50mm 50.80mm) withbush 2 1 , lubricatng oil (servo cut s 68), hss tool bit s-500 (3/8 3 ), power saw blade (30 0mm 25 mm 1.25 mm), hss (10), power saw blade 14 1 0.050 (300 mm 25 mm 1.25 mm), hss (10), lt control reversing switch 32 amp, 3 phase, m.s. flat (6 50) mm, m.s. flat (8 50) mm, m.s. flat (10 50) mm, m.s. pipe 50mm wall thickness 3 mm, each length 20 , m.s. electrode 3.15 mm, c.c.m.s. filler rod 1.6 mm, m.s. sheet 2 mm thickness, size 4 8 , m.s. sheet 3 mm, size 4 8 , aluminum sheet 3 mm, size 4 8 (grade-1100), mig welding wire spool (0.8 mm), mig welding wire spool (1.2 mm), silicon spray for mig w/l, mig w/l contact tip nozzle as per sample 0.8 mm, mig w/l contact tip nozzle as per sample, 1.2 mm, collet & ceramic nozzle for tig welding as per sample (4 nos), collet & ceramic nozzle for tig welding as per sample (5 nos), collet & ceramic nozzle for tig welding as per sample (6 nos), p.v.c. conduit pipe , p.v.c. elbow, p.v.c. tee, p.v.c. socket, p.v.c. 3 3 book with cover, p.v.c. 8 6 book with cover, ceiling rose, p.v.c. angle holder, 1 sq. mm. copper flexible wire, 1.5 sq. mm copper flexible wire, 2.5 sq. mm copper flexible wire, power contactor, 2 no + 2 nc, l&t, overload relay 14a, l&t 400v, on push, (heavy duty) red colour 6a, 400v, off push, (heavy duty) red colour 6a, 400v, digital times for star-delta starter, control panel indicator red, 230v, 22 mm, control panel indicator yellow, 230v, 22 mm, control panel indicator blue 230v, 22 mm, 36 swg super enameled wire, intermediate switch 6a, 230v, one way switch, 6a, 230v, two-way switch, 6a, 230v, 3-pin top, 6a, 230v, 3-pin top, 16a, 230v, pendent holder 6a, 230v, incandescent lamp, 200w, 230v, 6a socket, 230v, p.v.c. adhesive tape (red), p.v.c. adhesive tape (yellow), p.v.c. adhesive tape (blue), bridge rect er 35a, metal case single phase, 230v, hook up wire 1/25, diode 4007 ic, 7806 ic, resistors 15k, w, 680 w, 4.7k w, 10 k , w, 1 k , w, 3.9k , w, 3.3 k, w, 5.6k w, 120 , w, 8.2 k , 180 , w, 560 , 1/4w- each item 100 pcs, diode 1n4007,, zener diode 6v, 9v, 12v, 1w each item 50 pcs., transistor cl100, 5k100, each item 50 pcs., vero board 5 2.5 , vero board 5 6 , wire hook up wire (1/25) black, red, yellow, blue, green one roll for each colour, flexible wire 1 sq. mm, red, flexible wire 1 sq. mm, black, arduino uno board with usb connectng cable, ic mk484, rtd sensor pt 100, ldr big size, ic cd4017, lm7805, each item 25 pcs., transistor tip122, diode 1n4148, 5402, each item 100 pcs, led driver board for 9w & 12w le

Central Government/Public Sector

CTN :39885064

22 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For tender for supply of cabin table , behind table , panelling behind table , bottom cabinet , tall cabinet , work station providing the unit , work station providing the unit , behind table the wall will be of , bottom cabinet with granite , cabin table 01 providing the unit , behind table the wall will be of , bottom cabinet with granite , tall cabinet 01 providing the unit , cabin table 02 providing the unit , bottom cabinet with granite , tall cabinet 02 providing the unit , cabin table 01 providing the unit , behind table , bottom cabinet with granite , tall cabinet 01-providing the unit , cabin table 02 providing the unit , bottom cabinet with granite , tall cabinet 02 providing the unit , cabin table 01 providing the unit , cabin table 02 providing the unit , bottom cabinet with granite , tall cabinet unit with plywood , behind table , cabin table 01 providing the unit , cabin table 02 providing the unit , bottom cabinet , tall cabinet providing the unit , behind table the wall will be of , cabin table 01 providing the unit , cabin table 02 providing the unit , bottom cabinet , tall cabinet providing the unit , behind table the wall will be of , cabin table 01 unit with plywood , cabin table 02 unit with plywood , bottom cabinet , tall cabinet providing the unit , behind table the wall will be of , cabin table 01 providing the unit , cabin table 02 providing the unit , bottom cabinet , tall cabinet providing the unit , behind table , cabin table 01 , cabin table 02 , bottom cabinet , tall cabinet providing the unit , behind table the wall will be , cabin table providing the unit , behind table the wall will be of , panelling behind table , bottom cabinet , tall cabinet providing the unit , work station 1 providing the unit , work station 2 providing the unit , work station 3 providing the unit , conference table , cabin table 01 providing the unit , cabin table 02 providing the unit , printer storage top , printer storage bottom , electrical work labor , electrical material switch and socket , cap stand with 3 hooks , key board tray , bathroom mirror cabinet 2 , removing the existing partition , wall breakage for door fixing , door with frame panelling work , civil plastering work and closing , work station providing the unit , work station top unit , open and closed cabinet providing , painting overall room painting , gypsum panelling in ceiling work , partition work inside the cabin , cabintable providing the unit , console cabinet with stone finish , console cabinet with stone finish , tall cabinet providing the unit , texture wall panel , gypsum panelling in ceiling work , cabintable providing the unit , tall cabinet providing the unit , painting overall room painting , behind table , gypsum panelling in ceiling work , cabintable providing the unit , tall cabinet providing the unit , painting overall room painting , behind table , gypsum panelling in ceiling work , cabintable providing the unit , tall cabinet providing the unit , painting overall room painting , behind table , gypsum panelling in ceiling work , cabintable providing the unit , tall cabinet providing the unit , painting overall room painting , behind table , gypsum panelling in ceiling work , cabintable providing the unit , tall cabinet , painting overall room , behind table the wall will be , gypsum panelling , cabintable providing , tall cabinet providing , painting overall room painting , behind table , gypsum panelling in ceiling work , electrical work labor , electrical material switch and socket , 18 watts lights , cove lights , adapter for cove light , key board tray , upvc window for the 8 rooms

Central Government/Public Sector

CTN :39492004

07 Apr, 2025 1.15 Crore

Lucknow - Uttar Pradesh

Tender For corrigendum : repair maintenance and improvement of lt panel including lt switch gear, overheadline, pole box and allied works at various locations in area of age e/m (hosp) under ge e/m lucknow.

Rotary Switch Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors