Latest rotor shaft Tenders | Government rotor shaft Tenders

Central Government/Public Sector

CTN :42809219

24 Dec, 2025 NA

Jaduguda - Jharkhand

Tender For corrigendum : supply of 1- spares for gear pump, model no- rdrn-250-s for rotodel pump, rotor shaft for rdrn-250-s , 2- spares for gear pump, model no- rdrn-250-s for rotodel pump, stator shaft for rdrn-250-s , 3-spares for gear pump, model nordrn-250-s for rotodel pump, rotor gear for rdrn-250-s , 4-spares for gear pump, model no- rdrn-250-s for rotodel pump, stator gear for rdrn-250-s , 5- spares for gear pump, model no- rdrn-250-s for rotodel pump, r. v. assly for rdrn-250-s , 6- spares for gear pump, model no- rdrn250-s for rotodel pump, wearing plates for rdrn-250-s , 7spares for gear pump, model no- rdrn-250-s for rotodel pump, v seal for rdrn-250-s , 8- spares for gear pump, model no- rdrn-250-s for rotodel pump, oil seal for rdrn250-s , 9- spares for gear pump, model no- rdrn-250-s for rotodel pump, packing teflon for rdrn-250-s , 10spares for gear pump, model no- rdrn-250-s for rotodel pump, set of sleeve for rdrn-250-s , 11- spares for gear pump, model no- rdrn-250-s for rotodel pump, cs cash screw for rdrn-250-s , 12- spares for gear pump, model no- rdrn-250-s for rotodel pump, body for rdrn-250-s , 13- spares for gear pump, model no- rdrn-250-s for rotodel pump, bearing for rdrn-250-s , 14- spares for gear pump, model no- rdrn-250-s for rotodel pump, wearing plates bush for rdrn-250-s

CTN :43257682

09 Jan, 2026 NA

Khammam-T - Telangana

Tender For supply of crusher rotor shaft part no. 400-211-38 with key part no. 400-211-39, lock washer & lock nut , plate kick off (etk-11-18) part no. 400-211-18

corporations/Associations/Others

CTN :43273395

06 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For echp-i- reinsulation of 6.6kv, 240kw, kirloskar make ht motor sl.no.3900502-05 and reconditioning the rotor shaft dynamic balancing at conveyor-43

Central Government/Public Sector

CTN :43226470

07 Jan, 2026 NA

Kalol - Gujarat

Tender For procurement of operational spares for del pd make gear pumps installed at ctf- navagam of ahmedabad asset from oem. - procurement of operational spares for del pd make gear pumps installed at ctf- navagam of ahmedabad asset from oem., wearing plate, rotor shaft, rotor gear, stator shaft, stator gear, timing gear, collar, "v" seal, drive pinion (rh), drive gear (lh), packing, packing sleeve, snap ring, brg lock disk, piston o ring nitrial, ball bearing, oil seal, rotor shaft key, needle roller bearing, drive pinion key (rh), bearing cover, gland cover, wearing plate, rotor shaft, rotor gears, stator shaft, stator gears, timing gears, collar, v seal, drive r.h. pinion, driven l.h. gear, packing sleeve, bearing sleeve, snap ring, brg. lock disk, splash ring, bush, relief valve piston, spring spring, spring seat

corporations/Associations/Others

CTN :43244115

19 Dec, 2025 12.50 Lacs

Karur - Tamil Nadu

Tender For karur corporation_water supply drainage fund_2025-26_110 kw/150 hp (no 1 and 2) balammal puram main pumping station sewage vertical type submersible mono block motor coil and bearing , oil seal rotor shaft damage ,repair work in karur city municipal

CTN :43223899

27 Dec, 2025 NA

Darjeeling - West Bengal

Tender For supply of pipe 25mm 3 layer , ppr tee 20 mm dia , ppr tee 25 mm dia , ppr elbow 90 degree 20 mm , ppr elbow 45 degree 20 mm , ppr elbow 90 degree 25 mm , ppr elbow 45 degree 25mm , ppr socket 20mm dia , pvc socket 110 mm , pvc elbow 110 mm dia , pvc tee 110 mm , ppr union 20 mm , pvc float valve heavy duty 25mm dia suitable for ppr pipe , ppr male threated socket 20 to 25mm dia , ppr female threated socket 20 to 25mm dia , ppr male threated elbow 20 to 25mm dia , ppr reducer socket 25 x 20mm , m seal , pvc elbow 2 inch , pvc socket 2 inch , pvc pipe 2 inch dia 6 mtr long , pvc floor trap 4 inch dia with grating 2 inch outlet , pvc socket 4 inch , pvc elbow 4 inch dia , pvc pipe 4 inch dia 6 mtr long , pvc grating 4 inch dia , pvc clip for ppr pipe 25mm dia , ppr tank connector 25 mm , vitreous wash hand basin white 550 mm x 400 mm flat back including providing ci brackets cp pillar tap cp angle cock 15mm external thread pvc waste pipe 32mm dia , ewc vitreous wash down water closet pan pedestal pattern white pan p or s trap and to flusing pipe antisyphonage pipe etc complete with flush pipes , pvc flushing cistern 10 ltrs capacity with pvc connection 600mm long and waste pipe , pre fabricated septic tank of 1000 ltrs capacity septic tank shall be anchored with hold , pre fabricated sokage pit 500 ltr capacity soakge pit shall be anchored with hold fast , pvc p trap 110 x 75mm , pvc elbow 3 inch , pvc socket 3 inch , pvc pipe 3 inch dia 6 mtr long , pvc tee 3 inch , jointing resin solution of 1 kg or capsules of silicone gel with gel gun for leak proof , towel rail cp 600mm long complete with fitting oblique fixture , soap dish stainless steel chromium plated complete with fittings oblique fixture etc , electric storage water heater geyser 15 ltr capacity 1 ppoint 5kw vertical type including fixing arrangement on puf wall , flexible connection pipe 450 mm long for hot and cold water , ppr female threated elbow 20 to 15mm dia , ppr male threated socket 20 to 15mm dia , ppr female threated socket 15 to 20mm dia , invertor 2kva capacity with 02 battery 24v each battery 12v capacity complete with all accessories including connected electrical items and tools , provn of central heating system complete including structure for boiler room and elect fitting and fixtures all as specified in brief specification , electrician tool kit , plumbing tool kit , measuring fibre glass tape 5 mtr long , industrial safety helmet , showel square nose 14 gauge blade size 310 x 245 mm, shaft size 710 mm fitted with strong steel crutched wooden handles , puf rivet machine , rammer earth with handle minimum weight 5 kg without handle , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , manufacture and supply of storage shelter 30 mt barrel type of size 8 point 84m x 8 m x 5 point 13 m height at ridge all as specified in brief technical specifications , pvc sheathead copper cable 2 point 50 sqmm single core with multistrand 1100 volts , pvc conduit pipe 20 mm 10 feet long , pvc elbow 20 mm , pvc tee 20 mm , pvc space bar saddle 20 mm , pvc circular surface boxes with lid angle 02 way 20 mm , pvc circular surface boxes with lid angle 04 way 20 mm , highbay 150 watts energy saving environment 150 watt robust highbay led luminare with high efficacy suitable for ceiling surface oblique suspended , xlpe cable pvc insulated aluminium conductor served with inner sheathing of pvc tape cross sectional area 16 sqmm 3 core , surface plastic box suitable for moduler switches and socket of 8 module , solid plate with base frame suitable for surface plastic box of 8 module , isolator //bid details3 / 11340 amps spn 240 volts , ceiling rose pvc , angle steel footing size oblique length1000mm , bottom track size oblique length 2257 mm , bottom track size oblique length 2200 mm , gable bottom track size oblique length 3125mm , 0 point 8mm arch panel size oblique length 2260 mm , 0 point 8mm arch panel size obliq

CTN :43235070

08 Jan, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 25vevc002 d d - retrofit kit-1, shaft adapter for pump evac s 0444, solenoid valve r1/2 in 2-way 230v, switch selector 3-position, , light, pilot white, , light pilot green, gauge pressure, flange coupling, sleeve coupling, shut off valve on-100, shut off valve on 65, level switch stainless float 220v 50/60 hz, nozzle, flap non return for elector, gasket 125/100x2, gasket, hose clamp, discharge valve separator, three way valve r38, pressure switch, impeller (238mm/50hz) for pump evac se 044a 50hz, water valve eviac 90, shock, control mechanism, hose for push button, t connection, mini check valve, shut off valve r 12", impeller, 214(50 hz application), ventilator, reducer 14-50mm, outlet pipe, ragsnag ring for piping cologing prevertion, activator, lube exchange kit (o-rings screw, lobe key, mechanical seal kit (o-ring. mech seal dist plate, screw), wearing plate kit (screw cover plate, rubber bend, valve stem kit, mini check valve kit valve seat o ring valve flap), toilet evac 910-tervi, bolt, cell probe assembly, valve gate on-100, nozzle, gasket, shut off walve, rubber plate, bend hubor, hose clamp 50-70 din 3017 gem 5x9, wi, fastening plate, wing mut, three way valve ri, vacuum gauge r1/2 bar-10, nozzle, impeller, impeller, hose (flushing ring), impeller nut, mechanical seal for 5,5/qsh 101-f and 7.5/hk 80-1, elbow joint bib, ball, filter, control mechanism, connection hose, hose 4x2x1-1000, discharge valve dn 25, pneumatic push button, t-connection, hose clamp 3, radial gasket, nut mb high stainless, din 1587 capped, pump evac se 044a vem motor, ventilator for vacuum interface unit, float valve, rubber connection, bjector pump h, gamma ring, pneumatic plach button, flushing nozzle, seat and cover with hinger, control mechanism cvt, discharge valve one plugged, descharge wv, spare part kit for water val on ad, bevnage kit, bracket, installation kit, pump housing, square gasket, enz control box, dex sentior w gerlic, transitter w 33 ft carle, ss vacuum toilet evac stainless steel modn, seat and cover toscana, mechanical seal por puar vo, macerator h, kit gaskets complete, kit motor bearing complete, kit plug complete, kit: repair complete, actuator 30 18 223ac, level switch, level switch, pressure galue, glycerine faled og bar, static mixer 34, aste water flow adjustment, apy plow regulator, kit dmiradm, kit pump head, maintenance hit, kit valve, base plate, dosing pump, end face seal product end, g-rineng 15, bearing, impeller, fastening rod, spare part kit for water wave, spares part kit for ejector

Central Government/Public Sector

CTN :43186664

25 Dec, 2025 NA

Guna - Madhya Pradesh

Tender For supply of speedi sleeve for shaft size 170mm; cr seal or jm clipper make speedi- sleeve moc: stainless steel , speedi sleeve for shaft size 180mm; cr seal or jm clipper make speedi-sleeve moc: stainless steel

Central Government/Public Sector

CTN :42209960

19 Dec, 2025 NA

Medak-T - Telangana

Tender For bid to ras corrigendum : supply of super duplex stainless steel forgings : : - base plate central tg9754126011 , trunion bearing block tg9754126020 , crank block tg9754126038 , link 1 block tg9754126046 , main bearing block tg9754126054 , bearing cover tg9754126062 , balancing drum tg9754126070 , pin crank link tg9754126089 , shaft holder body tg9754126097 , shaft piston eye shaft tg9754126100

CTN :43168515

01 Jan, 2026 43.05 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institute, kh - supplying, installation, testing and commissioning of machines & equipment in civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education departmen.", computerized universal testing machine, 6 pillar type, for conducting tests on various types of ferrous and non-ferrous materials; consisting of-loading unit 600 kn capacity, hydraulic jaws and pumping system, clamping jaws for round specimens, clamping jaws for flat specimens, pair of compression plates,for compression test, rollers of 160 mm width and 30 mm diameters, for transverse test, bending table stopper, allen keys, spanners,double shear test attachment, bend rebend test attachment, electronic extensometer., steel bar cutting machine, vernier caliper, stainless steel ruler, 1m length, mixer machineriesconcrete mixerthe counter balanced mixing drum is easy to tilt two cubic feet mix capacity. total drum volume is 3 cubic feet.. suitable for operation on 220 volt single phase, 50 cycle, a.c. supply, isi cube mouldcube mould, with base plate : as per is : 516 with isi mark cube mould, 15 cm x 15 cm with base plate (made of cast iron - isi mark), cement mortar cube mouldcement mortar cube mould cube mould, 7.06cm x 7.06cm with base plate (made of mild steel), vibrating machinevibration machine with timer : is : 4031 this apparatus is suitable for making cubes of 70.7 mm. for mortar strength evaluation. the mould is mounted on a vibrating platform with a frequency of 12,000 400 vibrations per minute. to the platform are attached four matched springs. the whole assembly is operated by a revolving shaft with an eccentric mechanism. the machine is supplied with a timer, a switch mounted on a steel panel and a 70.7 mm. steel cube mould with a base plate., electronic balancecapacity 500gm, 0.01 gm accuracy, electronic balancecapacity 5kg, 0.1 gm accuracy, electronic balancecapacity 20kg, 0.5 gm accuracy, electronic balancecapacity 100 kg, 10g accuracy, air permeability apparatus (blaine type)isi certification mark is;5516, fitted in aluminium box, vibrating tablevibrating table for compaction concrete cube, cylinders the table deck size 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration the variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute a speed regulation handle is provided for increasing or decreasing the frequency. the vibrating deck. a switch is provided for starting the motor. operation on 440 volts, three phases, a.c. supply. table top - 50 cm x 50 cm, curing tankwater curing bath with agitation system digital indicator for temperature * 24- hour cycle from time of mixing * controlled 100 c +/- 2 c. temp. for concrete * controlled 27 c + 2 c curing temperature for grey cement the tank has been designed to accommodate 150 mm / 70.6 mm casted cubes up to 12/24 cubes and fully insulated. complete with a hinged lid, heated, thermostat and recirculation pump. provision of two removable racks allowing free circulation of water around each cube. the pump, drain valves and electrical equipment are housed in a compartment located at one end of the tanks. the tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35deg.c. +/- 2 deg.c, for about 15 minutes after immersion of the freshly-made specimens. curing tank for 12 moulds of 150mm/24 moulds of 7.06mm, vicat apparatus boxwith isi certification mark, is:5513, fitted in aluminium, le-chatelier mouldwith

Rotor Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector