Latest rough pad Tenders | Government rough pad Tenders

CTN :45056640

29 May, 2026 NA

Howrah - West Bengal

Tender For supply of form no. g-9/gl-23. letter delivery book. book of 100 leaves 1)unit- number of books, 2)size-152x215mm,plus/minus 5mm, 3)printing paper- white map litho 60 gsm, i.s no. 1848/part(1)2018. 4) printing- both side in black ink , printing matter to be collected from consignee, 5)binding- centre two stitching by 20 gauge wire with brown kraft paper cover of 110gsm of i.s no 1397/90 grade-ii (mg), 6)sample:- one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7) packing: each pack will contain twenty plus twenty total forty books. each twenty books packing must be wrapped in more than 50 micron transparent poly propylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no., form no. & serial no. if any. special condition:-quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

corporations/Associations/Others

CTN :45034145

20 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

CTN :45049887

25 May, 2026 NA

Howrah - West Bengal

Tender For supply of form no. c&p-13/c&p/r-2. treasury remittance note. book of 100 leaves. 1)unit- number of books, 2)size:215x305mm,plus/minus 5mm,3) printing paper: white map litho 60 gsm, i.s. no. 1848/part(1) 2018 ,4)printing-one side in black ink with machine numbering in three places as counter foil basis. printing matter to be collected from consignee, 5) binding- left side two stitching by 20 gauge wire with brown kraft paper cover of 110 gsm of i.s no 1397/90 grade-ii(mg), 6) sample- one sample for printing, binding and finishing to be got approved from consignee before bulk printing ,7) packing: each pack will contain ten plus ten total twenty books. each ten books packing must be wrapped in more than 50 micron transparent polypropylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l. no.,form no. & serial no. if any. special condition:- quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44561247

11 May, 2026 NA

Patti - Punjab

Tender For corrigendum : supply of hardware carpentry material requirement c c - hardware_carpentory item chap konda security door guards , auto hinges small cupboard , 3 hinges for small cupboard shutter , 4 hinges plywood doors , drawer handle 5 , main door handle 6 , ambroasian tape , door latch tadi patti 10 , aldrop for door 10 , tower bolt 6 , door nut bolt bugdi , mosquito net , batten patti 1 , 32mm flush door 36 x 81 , welding rod , plywood 12 mm 4 x 8 , plywood 18 mm 4 x 8 , plywood 6 mm 4 x 8 , plywood 8 mm 4 x 8 , sunmica 1mm thk , fevicol container , araldite tube 180 gram , hexa blade , curtain socket , curtain rod , cloth hanger 6 hooks , door stopper , nails 14 no x 1.5 , nails 14 x 2 , nails 17 no x 1.25 , nails 19 no x 0.333 , nails 14 no x 1 , screw 50 x10 , screw 60 x 10 , screw 35 x 10 full thread , screw 35 x 10 half thread , full thread screw 35 x 8 , full thread screw 25 x 8 , full thread screw 19 x 10 , bathroom door bolt 3 , main door 32 x 81 , batten patti 0.20 x 0.5 , door magnet for cupboard , door closer , steel cutting blade , wooden cutting blade , drawer lock , steel welding rod , steel welding spray , concrete nail 3 , concrete nail 2 , concrete nail 1.5 , concrete nail 6 , binding wire

CTN :44721034

02 May, 2026 4.02 Crore

Leh - Jammu And Kashmir

Tender For bid to ras supply of construction material for various jobs : : - cement opc 43 gde is-269 , stone aggregate 12 20mm is 383 , stone aggregate 40mm is 383 , stone aggregate 63mm is 383 , sand size as per is 2430 , rr stone is 1957 , quick setting compound , white cement , hard core , lime , brick bat , bitumen 80 100 , bituminous filled bd , pcc block , 25mm black granite , stone machinery , binding wire , 3mm pvc strip , plywood

Central Government/Public Sector

CTN :45026020

19 May, 2026 NA

Delhi - Delhi

Tender For genl-99l: printed letter head pad large, containing 100 leaves. finished size 20.8 cm x30.1 cm (plus minus 2 mm tolerance). paper to be used maplitho paper 70 gsm, conforming to is 1848/2007 or latest amendments. the pad to be printed one side in single colour as per specimen.binding: one wire stitch on top as per specimen.material should be supplied in packing of 20 pad in each bundle. the art work for printing and sample workman ship should be got approved from consignee before bulk supply.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

State Government

CTN :45000328

05 May, 2026 15.01 Lacs

Multi City - Karnataka

Tender For procurement of material for construction of cc drain and soakpit in menasuru village of menasuru gp of n r pura taluk in chikkamagaluru district - name board(gwmnrpura), solid concrete block(gwmnrpura), pvc pipe(gwmnrpura), rcc cap(gwmnrpura), centering charges 24 percent (since centering area increased)(gwmnrpura), binding wire(gwmnrpura), tmt bars fe 500(gwmnrpura), add watering charges at 1 percent on material(gwmnrpura), mixer (concrete) of 1 cum capacity(gwmnrpura), portland cement(gwmnrpura), coarse sand (zone iii)(gwmnrpura), broken stone aggregate 12 mm to 10 mm size(gwmnrpura), broken stone aggregate 20 mm size(gwmnrpura), broken stone aggregate 40 mm size(gwmnrpura)

State Government

CTN :45000329

05 May, 2026 12.47 Lacs

Multi City - Karnataka

Tender For procurement of material for construction of bannuru grama panchayath building in bannur gp of nrpura taluk of chikkamagaluru district - water tank(bannnur01), tmt steel(bannnur01), size stone 20x20x25 cm(bannnur01), sand(bannnur01), name board (1)(bannnur01), mixer (concrete) 1 cum capacity(bannnur01), hom of vibrator 0.71 days(bannnur01), centring for colum(bannnur01), cement(bannnur01), burnt brick(bannnur01), broken stone aggregate 12 mm to 10 mm size(bannnur01), boulders(bannnur01), bond stone(bannnur01), binding wire(bannnur01), broken stone aggregate 40 mm jelly (bannnur01), broken stone aggregate 20 mm jelly(bannnur01)

State Government

CTN :45000331

05 May, 2026 12.50 Lacs

Multi City - Karnataka

Tender For procurement of material for construction of bale gp building in balge gp of nrpura taluk in chikkamagaluru district - mgnrega name board(bale)), hom of vibrator 0.71 days(bale), water tanker (6k)(bale), mixer (concrete) 1 cum capacity(bale), centring(bale), binding wire(bale), tmt bars fe 500(bale), burnt bricks of class designation 35 modular(bale), boulders(bale), bond stone 20 x 20 x 45 cm(bale), size stone 20 x 20 x 25 cms(bale), portland cement(bale), coarse sand (zone iii)(bale), broken stone aggregate 12 mm to 10 mm size(bale), broken stone aggregate 20 mm size(bale), broken stone aggregate 40 mm size(bale)

Rough Pad Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government

State Government