Get complete information related to latest Rowel Bolt Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rowel Bolt Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rowel Bolt Tenders.
Tender For supply of chain link security fencing - type angle iron picket , angle iron supports , ms flat , chain link fencing , barbed wire , nuts 50mm , line bar of 8mm , footing of posts , cement opc 43 , coarse aggregate (sand) , 20mm graded stone , 40mm graded stone , 63 to 100mm crushed stone , brick bats 63 mm , erection tools
Tender For supply of bullet proof glass - hdpe laminated sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms , shs 6 mm thick size 120x120mm x 2.1m long for column with holes as per tech spec , ismb 150 rsj 150 x 75 mm g1 3050mm long for beam conforming to relevant is as per tech spec att , ismb 150 rsj 150 x 75 mm g3 400mm long for beam conforming to relevant is as per tech spec att , ismb 125 rsj 125 x 70mm g2 3.0m long for beam conforming to relevant is as per tech spec att , 6mm thick ms plate 150x150mm for shs column incl welding and nuts and bolts , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , steel roofing trough of size 1700 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , ms hexagonal nuts bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg per rm black in colour and shall contain as per tech spec att , red oxide primer conforming to relevant is , synthetic enamel paint colour green ist quality conforming to relevant is as per tech spec att , thinner as per as per tech spec att . sample to be approved before supply. , dry distemper as per tech spec att. sample to be approved before supply , chalk whiting as per tech spec attsample to be approved before supply , paint brush 4 inch make amar or lucky sample to be approved before supply , pre fabricated double shutter steel door of size 1100mm x1950mm made out of 2mm thick ms black carbon sheet as per tech spec att , supply of swivel bullet proof glass glass 610mm x300mm size 72 mm thick as per tech spec att , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick as per requirement for flat surface , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is , manufacturing sand confirming to relevant is as per tech spec att , stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is as per tech spec att , rapidite quick setting liquid. , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 and 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob
Tender For supply of stud fully threaded with 2 hex nuts size 3 by 4 x 6 inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 7 by 8 x 8 and one by 4 inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 1 x 7 inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size m12 x 50mm with specifications as per gem atc , ss 304 stud fully threaded with 2 hex nuts size 3 by 8 x 3 inch with specifications as per gem atc , ss 304 stud fully threaded with 2 hex nuts size 5 by 8 x 4 inch with specifications as per gem atc , ss 304 stud fully threaded with 2 hex nuts size m12 x 100mm with specifications as per gem atc , ss 304 stud fully threaded with 2 hex nuts size m16 x 90 mm with specifications as per gem atc , ms bolt fully threaded with 1 hex nut size m8 x 50 mm with specifications as per gem atc , ms bolt fully threaded with 1 hex nut size m10 x 30 mm with specifications as per gem atc , 2 and half kg ms plain round washers size 18 x 6 and half mm with specifications as per gem atc , socket head cap screw size m10 x 30mm with specifications as per gem atc , socket head cap screw size m10 x 50mm with specifications as per gem atc , socket head cap screw size m24 x 50mm with specifications as per gem atc
Tender For supply of stud fully threaded with 2 hex nuts size 5 by 8 x 3 inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 5 by 8 x 3 and half inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 5 by 8 x 4 and half inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 5 by 8 x 5 inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 5 by 8 x 5 and half inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 3 by 4 x 3 and half inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 3 by 4 x 4 inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 3 by 4 x 5 inch with specifications as per gem atc , stud fully threaded with 2 hex nuts size 3 by 4 x 5 and half inch with specifications as per gem atc , ms bolt fully threaded with 1 hex nut size m6 x 40mm with specifications as per gem atc , ms bolt fully threaded with 1 hex nut size m10 x 60mm with specifications as per gem atc , spring washer size 12mm dia with specifications as per gem atc , spring washer size 22mm dia with specifications as per gem atc
Tender For construction of artificial rock climbing wall cum slithering platform in garrison battalion ground - earth work in excavation by mechanical means hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering , providing and laying in position specified grade of reinforced cement concrete , brick work with burnt clay fps non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand , 12mm thick cement plaster 1ratio4 , filling available excavated earth excluding rock in trenches plinth sides of foundations , supplying and filling in plinth with jamuna sand under floors including watering ramming consolidating and dressing complete , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars , supplying of m s bolts round holding down of anchor boltds with nuts and washer plates complete , structural steel work , providing and fixing ms chequered plate 5mm thick , providing and fixing 0dot8mm thick colour coated sheet for shed , designing providing and fixing frp 3d panel with minimum 6 mm thickness at center and 10 mm at flanges , providing and fixing ss top belay bar , movable climbing holds , providing seat harness , static rope 10 mm , carabiner , providing bracket fdotodot8 bracket , providing mitton , gri gri , providing quick draw , 30mm manila rope bid number/ & ( * ) : gem/2025/b/6191380 dated/ + : 18-05-2025 bid document/ 3 3 1 / 19
Tender For bid to ras supply of plywood 1990mm x 910mm x 12mm thick , pu foam cushion of size 530 x 560x 100mm covered , pvc seat for chair dining 4mm , pvc seat and back for chair verandah 4mm , ms nuts with bolts 75mm long shank 6mm thick , ms nuts with bolts 38mm long shank 6mm thick , adhesive sh for furniture , pu foam cushion cover
Tender For supply and installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), cross trainer /elliptical exerciserdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse
Tender For hardware - hardware item, good quality nyloc nut as per standard specifications size 1/2" bsw, good quality nyloc nut as per standard specifications size 30mm, good quality nyloc nut as per stanadard specifications size 32mm, m.s. washer plain 3 mm thick a) size 1 /4 to 3/8 , m.s. washer plain 3 mm thick b) size to above, supply of accurate/a-1/ isi make m.s. bolt wilth nut size to 3/8 (full thread ), supply of accurate/a-1/ isi make m.s. bolt wilth nut size to above (full thread ), supply of accurate/a-1/ isi make m.s. bolt with nut size to 3/8 (half thread ), supply of accurate/a-1/ isi make m.s. bolt wilth nut size to above (half thread ), supply of accurate/a-1/ isi make m.s. bolt size 1/4" to 3/8" (full thread), supply of accurate/a-1/ isi make m.s. bolt size 1/2" to above (full thread), supply of accurate/a-1/ isi make m.s. bolt size 1/4" x 3/8" (half thread), supply of accurate/a-1/ isi make m.s. bolt size to above (half thread ), supply of accurate/a-1/ isi make m.s. nut size to 3/8 , supply of accurate/a-1/ isi make m.s. nut size to above, supply of accurate/a-1/ isi make m.s. bolt size 6 mm to 10 mm, supply of accurate/a-1/ isi make m.s. nut size 6 mm to 12mm, supply of accurate/a-1/ isi make m.s. nut size 12mm to above, m.s hexagonal nut size 3mm, m.s hexagonal nut size 3 mm, forged steel wire rope grip a) for 10 mm dia wire rope, forged steel wire rope grip b) for 20 mm dia wire rope, forged steel wire rope grip c) size 28 mm dia wire rope, summit make grease cup, aligator no.27, aligator no.35, aligator no.45, u clamp a) size 1 /2 , u clamp b) size 5/8 , u clamp c) size 3 /4 , hose clip for pipe a) 10 mm nb, hose clip for pipe b) 20 mm nb, hose clip for pipe c) 25 mm nb, hose clip for pipe d) 32 mm nb, hose clip for pipe e) 40 mm nb, hose clip for pipe f) 50 mm nb, hose clip for pipe g) 65 mm nb, counter shunk m.s. bolt full thread in mm size size 20 x 35 mm, counter shunk m.s. bolt full thread in mm size size 32 x150 mm, counter shunk m.s. bolt full thread bsw thread size 3/8 x 3 /4 , counter shunk m.s. bolt full thread bsw thread size 3/8 x 1 , counter shunk m.s. bolt full thread bsw thread size 3/8 x 1.1/2 , counter shunk m.s. bolt full thread bsw thread size 1 /2 x , counter shunk m.s. bolt full thread bsw thread size 1 /2 x 1 , counter shunk m.s. bolt full thread bsw thread size 1 /2 x 1.1/4 , counter shunk m.s. bolt full thread bsw thread size 1 /2 x 1.1/2 , counter shunk m.s. bolt full thread bsw thread size 1 /2 x 2 , counter shunk m.s. bolt full thread bsw thread size 5/8 x 2 , counter shunk m.s. bolt full thread bsw thread size 5/8 x 2.1/2 , counter shunk m.s. bolt full thread bsw thread size 5/8 x 3 , counter shunk m.s. bolt full thread bsw thread size 5/8 x 4 , counter shunk m.s. bolt full thread bsw thread size 5/16 x 1 , counter shunk m.s. bolt full thread bsw thread size 3 /4 x 1.1/2 , counter shunk m.s. bolt full thread bsw thread size 3 /4 x 2 , counter shunk m.s. bolt full thread bsw threadsize 3 /4 x 2.1/2 , counter shunk m.s. bolt full thread bsw threadsize 3 /4 x 3 , counter shunk m.s. bolt full thread bsw thread size x 3.1/2 , counter shunk m.s. bolt full thread bsw thread size 7/8 x 4 , counter shunk m.s. bolt full thread bsw threadsize 7/8 x 5 , counter shunk m.s. bolt full thread bsw thread size 7/8 x 6 , counter shunk m.s. bolt full thread bsw thread size 7/8 x 7 , m.s. stud bsw thread a) size 1 /4 x 3/8 , m.s. stud bsw thread b) size 1/2" x above, cadmium bolt electroplating full thread with nut size 1 /2 x 5 , grinding wheel 100 nos. grain 8 x 1 x 1 , grinding wheel 60 nos. grain 8 x 1 x 1 , general discount on ss allen bolt aisi-304 quality (list to be attached without fail) discount will be allowed @_____% on the price list dated__________, general discount on stainless steel nut bolt ss-410 quality (list to be attached without fail) discount will be allowed @_____% on the price list dated__________, unbrako make high tensile bolt& nuts, allen bolt. discount on price list to be qu
Tender For construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter & battery