Latest rubber based adhesive Tenders | Government rubber based adhesive Tenders

Central Government/Public Sector

CTN :41244678

11 Aug, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of rubber based adhesive to icf specification no. icf/m/d/028, issue status-01 rev.-04 or latest, in suitable packing of 05 liters, shelf life 12 month. "manufacturing date should be clearly me ntioned on each pack." [ warranty period: 30 months after the date of delivery ]

CTN :41295628

11 Aug, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of rubber based adhesive, specn.is:2561/1963 (reaffirmed-2018) (shelf life 12 mon ths) specn: .is:2561/1963 (reaffirmed-2018) (shelf life 12 months) [ warranty period: 12 month s after the date of delivery ]

CTN :40899518

05 Aug, 2025 98.71 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-20225 requirement of spares for railway track maintenance at kstps railway siding, kota. - antitheft rail clip rdso drg. no.t-6254 & t-6255, bolt & nut 25x390 mm rdso drg. no t-11534, bolt & nut 25x370mm rdso drg. no t-11532, bolt & nut 25x300 mm rdso drg. no t-11525, bolt & nut 25x260 mm rdso drg. no t-11521, bolt & nut 25x250 mm rdso drg. no t-11520, tapered split pin ce-22994/8, single coil spring washer (for 28 hook bolt), grooved rubber pad rdso drg. no t-5163, bolt&nut (t-5164)for guard rail bridge, 28 hook bolt (330 length), nut for 28 hook bolt (is-549), split pin (for 28 hook bolt)(is-549), grooved rubber pad (10mm) t-5199, elastomeric pad 25mm (245x270x25/30), elastomeric pad 25mm (245x410x25/30), elastomeric pad 25mm (245x220x25/30), check rail bolt rdso drg. no t-11513, curved switch 52 kg 1 in 12 rdso drg. no t-4733 (r), crossing 1 in 8 1/2 p&c t-20806 with complete fittings, elastic rail clip j type rdso drg. no t-4758, fish plate bolt (25x130) rdso drg. no t-11501, fish plate bolt (25x140) rdso drg. no t-1899, fish plate (1mtr.) rdso drg. no t-5915, glued joint 52 kg 6.5 mtr rdso drg. no t-5361, grooved rubber pad rdso drg. no (t-4610), grooved rubber pad rdso drg. no (t-4611), grooved rubber pad rdso drg. no (t-4612), grooved rubber pad rdso drg. no t-4613, grooved rubber pad rdso drg. no t-4614, grooved rubber pad rdso drg. no t-4615, grooved rubber pad rdso drg. no t-4616, grooved rubber pad rdso drg. no t-4617, grooved rubber pad rdso drg. no t-4618, grooved rubber pad rdso drg. no t-4619, grooved rubber pad rdso drg. no t-4620, grooved rubber pad rdso drg. no t-4621, grooved rubber pad rdso drg. no t-4622, p.c. sleepers (mono block)b6-60kg rdso drg. no t-2496, stock rail for 52 kg 1 in 8 1/2, sej 52 kg rdso drawing no. t - 4160, self sovening spring point (spring point) lever mech. -l3040, tongue raill, tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( l), tongue raill 1 in 8 (approx 4.75 mtr length ) suitable for 52 kg bg track st layout as per rdso ( r), grooved rubber pad for sej 52 kg as per rdso drawing (t - 4161, t-4162 & t-4163), channnel sleeper (15 mc 160) 2540mm long, ms brackets rdso drawing no. t-4180, ms brackets rdso drawing no. t-4181, ms brackets rdso drawing no. t-4182, tee head bolts 25mm as per drawing no.t-2659, tee head bolts 25mm as per drawing no.t-2660, plate screw (140x24) mm rdso drawing no. t-3911, plate screw (130x24) mm rdso drawing no. t-3915, plate screw rdso drg no. t-3912, guage tie plate rdso drg. no. t-5203 & t-5203/2, slide chair rdso drawing no. t-4735, slide chair rdso drawing no. t-4736, slide chair rdso drawing no. t-4737, slide chair rdso drawing no. t-4738, slide chair rdso drawing no. t-4739, slide chair rdso drawing no. t-4740, slide chair rdso drawing no. t-4741, slide chair rdso drawing no. t-4742, slide chair rdso drawing no. t-4743, slide chair rdso drawing no. t-4744, slide chair rdso drawing no. t-4745, slide chair rdso drawing no. t-4746, slide chair rdso drawing no. t-4747, slide chair rdso drawing no. t-4748, fish plate (60/52kg) junction (t-696/699), m.s moon washer for s.t sleeper

Central Government/Public Sector

CTN :40927735

06 Aug, 2025 52.00 Lacs

Goa - Goa

Tender For corrigendum : repairs to joint filling on concrete surfaces of taxi tracks, dispersals, repairs to dispersals, etc with elastomeric concrete at south side of runway under age b/r-i of ge (nw) vasco.

Central Government/Public Sector

CTN :40927737

06 Aug, 2025 52.00 Lacs

Goa - Goa

Tender For corrigendum : repairs to joint filling on concrete surfaces of taxi tracks, dispersals, repairs to dispersals, etc with elastomeric concrete at north side of runway under age b/r-i of ge (nw) vasco

Central Government/Public Sector

CTN :41238437

01 Aug, 2025 NA

Chittaranjan - West Bengal

Tender For supply of rubber based adhesive, specn.is:2561/1963 (reaffirmed-2018) (shelf life 12 mont hs) [ warranty period: 12 months after the date of delivery ]

CTN :41177763

30 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supplying items for the new integrated high court complex at bandra government colony, cts no. 629/1234/a, bandra (east), mumbai. - all concrete should be admixed with integral hydrophilic crystalline admixture (16bars) reputed makes like bulwark. taskmek, grace or equivalent for reducin permeability by more than 85% when tested as per din 1048 part 5 (after applying cycles of hydrostatic pressure), for self-healing of cracks up to a width of 0.40 mm, for reduced sulphate attack and for high early strength of concrete etc. this should meet the requirements specified in the recommended dosage rate of 1% complete as per manufacturers specifications to the entire satisfaction of engineer-in-charge. hydrophilic crystalline admixture shall also have a corrosion inhibitant property and shall be compatible with any other water reducing concrete chemical admixtures added to concrete for workability purpose. crystalline formation shall be mix of cylindrical & circular in shape to have maximum filling of pores the admixture used shall have manufacturers test reports and approval mandatorily both from iits and irc (indian road congress). approved makes: pidilite/ technonicol/ myk/ mapei, providing & applying 2 components, solvent free, liquid applied elastomeric seamless hybrid polyurea polyurethane membrane, using high pressure plural component spray equipment, to form a minimum system thickness of 1.5 mm in two or more passes with a total consumption of 1.5-1.6 kg / m2. the membrane shall have 100% solids, voc free, tensile strength > 15 mpa as per astm d 412, elongation > 450% as per astm d 412, low temperature crack bridging ability of 3.2mm as per astm c 1305, shore a hardness > 85 astm d 2240, puncture resistance > 1000 n as per astm e 154, water head resistance > 7 bar as per astm d 5385.the coating should pass dynamic crack bridging as per en 1062-7, method b for 20,000 cycles at -20 degree temperature. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. apply primer coat of epoxy primer by roller/ airless spray guideline and coverage @ 5-6 m2/ltr depends on porosity of concrete. allow to cure for max 5-6 hours. broadcast anti slip grains of 200-300 micron (dried sand) on wet primer at coverage of 0.8-1 kg/m2 and allow to come to touch dry condition before application of membrane. approved makes: pidilite/ technonicol/ myk/ mapei, supplying and installing 1.5 mm composite thick fully bonded weldable hdpe membrane conforming to is 16471:2017 requirements of ug waterproofing structures, requirements to provide type a fully bonded protection of ug waterproofing structures. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. the membrane should be minimum 2.4 m wide comprising of an hdpe layer and a pressure sensitive adhesive layer which is covered by a weatherproof protective layer with lap joint strength at overlaps >15000 n/m astm d 6392:2012. the membrane shall have minimum of 100 mm side and end laps which shall be thermos fused with leister machines at all the joints for assuring watertightness and achieving monolithic membrane. end laps and side laps should be a minimum of 100 mm with double weld system, comprising of two parallel welds of 15 mm wide each with a 20 mm air channel gap in between the two weld lines. the size of the membrane should not be less than 2.4 mtr. x 20 mtr. to minimize the joints. this membrane shall be continued over the vertical surface but terminated minimum 100mm below the top edge of the raft slab/footings and fixed as per recommendation. the hdpe membrane should have the below mentioned technical properties- 1) lap joint(side and end lap) strength at overlaps 15000 n/m astm d 1876 2) resist hydrostatic pressure of 70 m head of water as per astm d5385 3) puncture resistance of 1000 n as per astm e1544) peel adhesion to concrete of 150

Central Government/Public Sector

CTN :41039972

07 Aug, 2025 50.00 Lacs

Bhisiana - Punjab

Tender For corrigendum : maintenance/ repair of pu joint filling, epoxy and elastomeric on taxi track, ptt, dispersal in tech area at af station bhisiana under ge (af) bhisiana

Central Government/Public Sector

CTN :41157730

08 Aug, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of rubber based adhesive. specification no. icf/md/spec-028 (rev-4) amendment.1 nb: material shall be packed in 5 liters suitable container [ warranty period: 30 months aft er the date of delivery ]

Central Government/Public Sector

CTN :41143265

04 Aug, 2025 NA

Yamunanagar - Haryana

Tender For supply of rubber based adhesive.specification no. icf/md/spec-028 (rev-4) amendment 1 nb: material shall be packed in 5 liters suitable container. [ warranty period: 6 months after the date of delivery ]

Rubber Based Adhesive Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector