Get complete information related to latest Rubber Belt Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rubber Belt Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rubber Belt Tenders.
Tender For compititive ebidding for supply of rubber goods items for season 2025-26 - rubber bush od id length, 18 10 25, 25 12/15 15, 25 15/18 25, 25 18 50, 30 18 25/30, 35 15 30, 38 18/25/28 38/50, 40 12/20/25 40, 38 20/25 25/40, 45/50 25/28 50, 30 20 35/50, 50 30 50, 1" 5"/8" 1 1/4", 1 1/4" 3/4" 1 1/2", rubber goods, rubber star l- 70/75, -do- l-90, -do- l- 99/100, rubber conical ring size for boiler gauge glass, neoprene rubber dumping pad for c/f machine, 75mm od x 60mm length, 8 od x 3 length, neoprene rubber seat for double beat valve/pan header feed valve od mm id mm thick mm, 175 60 15, 230 70 25, 290 25 20, 290 75/20 20, 295 78 20, 315 200 20, 320 175 25, 800 650 25, 900 650 25, 1110 820 40, rubber strip for juice heaters, size 12 x 15 mm, size 12 x 18 mm, size 20 x 25mm, size x , size 2 wide x 1 thick mtr, size 12 x 20 x 25, size 12 x 15 x 20, size 15 x 15 mm, u shape rubber coupling impregnated with ms plate for nk-1503 e/f m/c, neoprene rubber taper plug for quad/pan tubes, 42mm id tubes, 98mm id tubes, neoprene rubber star coupling as per sample for dc1250 c/f machine, synthetic rubber buffer of dc 1250 c/f machine as per sample /drawing, brass lined rubber bush for boiler feed pump od-30mm, id-12mm, thik-20mm, rubber dori/cord, size a- 5/6 mm, size b- 8mm, rubber mud seal for dorr as per sample, man hole rubber seat quad size 640 x 460 x 20mm, man hole rubber seat for pan size 535 x 445 x 20mm, neoprene rubber diaphragm for boiler control valve as per sample, neoprene rubber seat for pan discharge valve as per drawing/sample, for 40 ton pan, for 50 ton pan size 626 x 584 x 534 x 26mm, for 60 ton pan size 682 x662 x562 x 30mm, for 80 ton pan size 629 x465 x408 x 30mm, rubber seat for telescopic valve as per sample, for 6 valve size, for 8 valve size, neoprene rubber seat for juice weighing seale size- od 845 x id 38mm x 20 mm thick pcd 703mm with 12 holes of , neoprene rubber idler/roller pulley of belt conveyor, bore 88mm, bore 75mm, neoprene rubber bucket for mill hydraulic (each set), neoprene rubber seat for exhaust / vapor valve suitable for upto 200 c temperature, 21 x 1 x 15mm, 480 /505 x 300/325 x 25mm, 545 x 450 x 350 x 30mm, 560 x 485 x 420 x 25mm, 560 x 490 x 445 x 25mm, 560 x 445 x 25mm, 570 x 470 x 360 x 25mm, 575 x 445 x 15mm, 580 x 400 /425 x 25mm, 580 x 360 x 25mm, 600 /625 x 400/410 x 25mm, 625 x 410 x 30mm, 650 x 400 x 25mm, 665 x 570 x 520 x 30mm, 670x 570 x 510 x 30mm, 675x 580 x 540 x 25mm, 680 x 400/420 x 30mm, 682 x 662 x 30mm (pcd-582), 745 x 525 x 25mm, 790 x 550 x 25mm, 860 x 560 x 30mm, 950 x 800 x 720 x 30mm, 990 x 710 x 30mm, 990 x 760 x 30mm, 1015 x 995 x 905 x 30mm, 1015 x 995 x 30mm (pcd-905mm), 1090 x 790 x 30mm (pcd-905mm), 1350 x 1020x 30mm, rubber buffer for hopper with hole as per sample, rubber squeezer for dorr size 6 wide x 1 thick x 30 long, c/f m/c rubber parts, rubber seal for gate cylinder as per sample 105mm od, rubber seal oil for pneumatic valve, rubber seal for pneumatic valve, rubber kit for solenoid valve as per sample, spare kit for solenoid valve as per samples, rubber piston hood cylinder 150mm od, rubber seal for gate cylinder plough, rubber bucket for plough cylinder as per sample, rubber ring for sd machine housing as per sample, rubber bucket for sd machine separator chute cylinder, rubber flat ring seat 260x250x5, rubber seal for plough with spring, rubber piston cup for syrup separator, rubber piston cup for plough 60/62mm od, rubber piston cup for plough cylinder 35mm od, rubber o ring for 1350kt c/f m/c housing, paticot ring for 1350 kt c/f m/c housing, rubber o ring for syrup separator gate cylinder, neoprene rubber molasses belt v type 04 mtr long, black rubber joint sheet (per kg), size 1/8 , size , rubber hose pipe corrugated wire wound for vacuum filter, size 3 id x 21 long, size 4 id x 21 long, spare coupling tyres, px-40, px-50, px-60, px-70, px-80, px-90, px-100, px-110, px-120, ph-140, ph-178, ph-190, ph-218, ci tyre coupling complete (each set), px-40, p
Tender For supply of various conveyor sections and spare for conveyor system - supply of various conveyor sections, 1. conveyor section for centrally located drive: the conveyor section shall be used for centrally located drive units. total length of the section shall be 2 meter. the conveyor section shall have all the necessary items and ready to replace the existing section. vendors scope of supply includes, conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, railing cum leg supports, railing angles, whmwpe wear pads fitted on the track, pillow block mounting, gear box mounting frame, idler shaft, idler sprockets, counter weights, soap solution tray, gaskets, anchor fasteners, m10 mounting bolt & nuts including chain complete in all respects including painting., conveyor track for straight section: this shall be used for existing straight conveyor section to replace the damaged conveyor tracks. 2.5 meter conveyor tracks (top and bottom) assembled with flanges, fitted with wear pads., common tail end: this common tail end should be combined type and total length of the section shall be 1.5 meter. the section shall have all the necessary items and ready to replace the existing section. vendor s scope of supply includes, common tail end conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, railing cum leg supports, railing angles, whmwpe wear pads fitted on the track, idler shaft, idler sprockets, soap solution tray, gaskets, anchor fasteners, m10 mounting bolt & nuts including chain complete in all respects including painting., straight conveyor section: this is standard 2.5 meter straight conveyor section complete in all respects. the straight conveyor section shall have all the necessary items and ready to replace the existing section. vendors scope of supply includes, conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, railing cum leg supports, railing angles, whmwpe wear pads fitted on the track, gaskets, anchor fasteners, m10 mounting bolt & nuts including chain complete in all respects including painting., divertors for t sections along with pneumatic cylinder and all the necessary fittings complete in all respect, twin arm stopper assembly. complete in all respects including pneumatic cylinders, rollers, all the necessary mountings, supporting legs and painting., uhmwpe wear pad for 90 degree bend section. side mounting wear pad for protection from chain slippage from the bend., uhmwpe wear pad for 90 degree bend section. wear pad for mounting on conveyor track of the 90 degree bend section., m10 x 35mm bolt nut washer set, counter weight set (left and right sided) along with mounting handle to be used for centrally located drive sections., skf bearing for drive units drive shaft with 65mm dia. model: yar - 213 - 2f, pneumatic pusher set. to be used for rejection line to push the cylinders from main line, complete in all respect including 50mm dia, stroke 400mm pneumatic cylinder, guide rod, pusher pad, all the necessary fittings, mounting plate and leg supports., freight and packing & forwarding charges, gst @ 18% for total amount of supply + freight charges
Tender For providing and fixing of children play equipment at park near house no.3722 sector -46,chandigarh under m.p.lads (work no.36 18 ls) - m.a.p.s (jumbo 3x1)sr. no. description quantity1 standard see saw 12 double swing 13 wave slide 5 ht. 1area : 4m x 4msafe area : 5m x 5m(jumbo 3 x1) set consist of :standard see saw:this item provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush typedouble swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubberbelt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide:the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., wide slide ssarea : 3m x 1.2msafe play area : 4 m x 2.2 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angles. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., swinging loop rung rec. age : 5-14 yrs.the area : 3.2m x 0.9 msafe play area : 4.2m x 1.9 mthis is another of item that provides hanging as well as swinging experience to the children . the frame is fabricated out using 40 nb and 25 nb powder gi pipes. there are 09 triangles loops of 15 nb which are attached to the top pipe of the frame using s hook. the ladder used is designed to the side support pipe itself.
Tender For supply of idlers for coal handling plant - carrying idler roller for 800mm wide conveyor belt as per drg 1293- 10103025640_1_1000068717_uom_ea , return idler for 800mm wide conveyor as per drg 3077- 10103026830_3_1000068717_uom_ea , return idler roller for for 800mm wide coal conveyor belt as per drg 3570-10103207390_5_1000068717_uom_ea , ct idler for 1000 mm widh con.belt as per drg 1294- 10103999570_6_1000068717_uom_ea , impact idler for 1000mm coal conveyor belt as per drg 3571- 10103207460_7_1000068717_uom_ea , impact idler roller for 800mm wide coal conveyor as per drg 3571-10103207530_8_1000068717_uom_ea , carrying rollers for 1000mm width conveyor belt as per drg 1294-10103027020_9_1000068717_uom_ea , carrying idler roller for 800mm coal conveyor belt as per drg 3569- 10103207150_10_1000068717_uom_ea , return idler for 1000mm bw conveyor as per drg 3570- 10103001020_11_1000068717_uom_ea
Tender For corrigendum : rectification/repairing of troughing/top idler frame of reclaim conveyor 3c1, 3c2, 4c1, 4c2 including complete fitting (1400 mm) and scrap return to chp store section at chp phase-i, amlohri project.
Tender For corrigendum : supply of conveyor rollers and idlers - 1700004598 metal carrying roller for 1050 belt width , 1700004597 metal carrying roller for 1200 belt width , 1700004551 10 deg v type return roller for 1050 belt width , 1700004537 10 deg v type return roller for 1200 belt width , 1700004490 rubber impact carrying roller for 1050 belt width , 1700004491 rubber impact carrying roller for 1200 belt width , 1700004608 flat return roller for 1050 belt width , 1600119313 carrier idler frame for 1050 belt width transition 35 deg , 1600119314 carrier idler frame for 1200 belt width transition 35 deg , 1600119158 self aligning carrier roller frame for 1050 belt width , 1600119159 self aligning carrier roller frame for 1200 belt width , 1600119160 guide roller for self aligning troughing trainer