Get complete information related to latest Rubble Stone Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rubble Stone Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rubble Stone Tenders.
Tender For corrigendum : biennial rate contract for pre-monsoon (monsoon-2026 and 2027) and periodic drain cleaning, natural water stream cleaning, rubblestone shifting from lignite handling system, periodic run off pond cleaning works (year: 2025-2027).
Tender For supplying of material for development of tugalgatti tank in tulasigeri village of bagalkote taluk of bagalkote district. - wire mesh 50mm x 50mm (tugalgatti), welding charges at 10% on material (tugalgatti), fitter class i (tugalgatti), painter class i (tugalgatti), aluminium paint (tugalgatti), tugalgatti)20 mm dia hold fast rod, tugalgatti) 60 x 60 x 10 guage sq. plate washer, tugalgatti)15 mm bolt, m.s. angles 65 x 65 x 6 mm 34.7 kgs (tugalgatti), spall (jelly used for packing) (tugalgatti), boulders (tugalgatti), plate vibrator having 3 ton compaction force (tugalgatti), cobble stones of 60 mm thick (tugalgatti), vibratory roller 8 tonne (tugalgatti), water tanker (tugalgatti), gravel 2.36 mm/murrum (tugalgatti), water (tugalgatti), casurina poles 75 - 100 mm dia (tugalgatti), casurina poles 100 - 150 mm (tugalgatti), silver oak or equivalent planks 38 mm thick (tugalgatti), binding wire (tugalgatti), tmt bars fe 500 (tugalgatti), hom of vibrator 0.71 days (tugalgatti), plasticizer / super plasticizer (tugalgatti), mixer (concrete small used in culvert) (tugalgatti), bond stone 20 x 20 x 45 cm (tugalgatti), rubblestones (tugalgatti), mixer (concrete) - 1 cum capacity (tugalgatti), portland cement (tugalgatti), coarse sand (zone iii) (tugalgatti), broken stone aggregate 12 mm to 10 mm size (tugalgatti), broken stone aggregate 20 mm size (tugalgatti), broken stone aggregate 40 mm size (tugalgatti)
Tender For development of canal near check dam in dodda kere halla of hebbalagere village - hebbalagere crowbarman, hebbalagere mason class i (with tools), hebbalagere crew for water tanker, hebbalagere crew for pump, hebbalagere water tanker 8000 ltr and fuel, hebbalagere 5 hp pump and fuel, hebbalagere stone chips at quarry, hebbalagere through stone 200 x 200 x 300 mm, hebbalagere uncoursed rubblestones, hebbalagere vibratory roller 8 tonne, hebbalagere water tanker, hebbalagere gravel 2.36 mm/murrum, hebbalagere water, hebbalagere add watering charges at 1 % on material, hebbalagere mixer (concrete) - 1 cum capacity, hebbalagere mason class ii (with tools), hebbalagere portland cement, hebbalagere coarse sand (zone iii), hebbalagere broken stone aggregate 12 mm to 10 mm size, hebbalagere broken stone aggregate 20 mm size, hebbalagere binding wire, hebbalagere tmt bars fe 500
Tender For corrigendum : supply of matrials for constraction of swm , unit in grama panchayat jummanakatti - mgnrea-jmk add white lead paint,gasket, cement, sand for making good the wall and floor at 2% on material, mgnrea-jmk mosquito proof coupling 25mm, mgnrea-jmk special for overflow pipe, mgnrea-jmk g.i. overflow pipe 20mm dia, mgnrea-jmk m.s. holder bat clamp 32mm, mgnrea-jmk g.i. 32mm dia telescopic flush pipes with fittings specials, mgnrea-jmk c.i. / m.s. brackets for flushing cistern, mgnrea-jmk p.v.c. flushing cistern 10 ltslow level with fitting, mgnrea-jmk 100mm s or p trap, mgnrea-jmk orissa pattern of size 580x440mm with integral type foot rests, mgnrea-jmk binding wire, mgnrea-jmk tmt bars fe 500, mgnrea-jmk add brush, putty, sand paper, roller at 5% on cost of paint, mgnrea-jmk enamel paint, mgnrea-jmk unit cost as per the specification, mgnrea-jmk tools & plants and electrical charges at 2%, mgnrea-jmk add brush at 1% on cost of paint, mgnrea-jmk enamel metal paint, mgnrea-jmk add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, mgnrea-jmk ready mix primer paint (ready mix red lead paint), mgnrea-jmk hom of cutting and grinding machine, mgnrea-jmk add, mgnrea-jmk hom of welding and grinding machine, mgnrea-jmk welder grade i, mgnrea-jmk corbon electrodes, mgnrea-jmk anchor bolts 750mm, mgnrea-jmk base plate / base plate, mgnrea-jmk gusset plates 6 mm thick, mgnrea-jmk ms angle iron 40mm x 40mm x 6mm, 23 mtr in length at 3.5 kg per mtr, mgnrea-jmk mgnrea-jmk ms angle iron 50mm x 50mm x 6mm, 33.8 mtr in length at 4.5 kg per mtr, mgnrea-jmk broken granite metal 10 mm, mgnrea-jmkbroken granite metal 20 mm, mgnrea-jmk painter class i, mgnrea-jmk add brush, putty, sand paper at 2% on cost of paint, mgnrea-jmk water proofing cement paint, mgnrea-jmk add providing and removing scaffolding at 3% on labour, mgnrea-jmk solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm, mgnrea-jmk add handling , loading and unloading at 1% on material, mgnrea-jmk brick, mgnrea-jmkadd watering charges at 1 % on labour, mgnrea-jmk add sundries charges at 1 % on labour, mgnrea-jmk stone chistler class ii, mgnrea-jmk mason class i (with tools), mgnrea-jmk boulders, mgnrea-jmk size stone 20 x 20 x 25 cms, mgnrea-jmkmixer (concrete small used in culvert), mgnrea-jmk bond stone 20 x 20 x 45 cm, mgnrea-jmk rubblestones, mgnrea-jmk add sundries charges at 2 % on material, mgnrea-jmk bolts and nuts, mgnrea-jmk ms flat, mgnrea-jmk casurina poles 100 - 150 mm, mgnrea-jmk add handling , loading and unloading at 2% on material, mgnrea-jmk casurina poles 75 - 100 mm dia, mgnrea-jmk jungle wood runners and planks, mgnrea-jmksilver oak or equivalent planks 38 mm thick, mgnrea-jmk hom of vibrator 0.71 days, mgnrea-jmk mason class ii (with tools), mgnrea-jmk super plasticizer admixture is marked as per 9-103-1999, mgnrea-jmk add watering charges at 1 % on material, mgnrea-jmk mixer (concrete) - 1 cum capacity, mgnrea-jmk portland cement, mgnrea-jmk coarse sand (zone iii), mgnrea-jmk broken stone aggregate 12 mm to 10 mm size, mgnrea-jmk broken stone aggregate 20 mm size, mgnrea-jmk broken stone aggregate 40 mm size, mgnrea-jmk over head & other miscellaneous charges, mgnrea-jmk add sundries charges at 1 % on material, mgnrea-jmk licenced blaster, mgnrea-jmk drilling mechanic grade i, mgnrea-jmk safety fuse wire, mgnrea-jmk detonators, mgnrea-jmk special gelatin, mgnrea-jmk drilling equipment
Tender For as per nit serial no-1 stage works at high court srinagar - engagement of skilled and un-skilled labors ., mazdoor., carpenter 1st class., carpenter 2nd class, mason 1st class., mason 2nd class., plumber., black smith., earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:(all kinds of soil), providing and laying in position cement concrete of specified grade of mix 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering., providing and laying in position cement concrete of specified grade of mix 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering., providing and laying in position cement concrete of specified grade of mix1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering., providing and laying in position specified grade of reinforced cement concrete of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centering, shuttering, finishing and reinforcement., providing & laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) including all carriages and curing complete., providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including all carriages and curing complete., providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. all works upto plinth level 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), providing and laying cement concrete of mix 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg. 20 mm nominal size) crushed in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor v level, including curing and all carriages of material involved but excluding the cost of centring, shuttering and finishing complete., reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level thermo-mechanically treated bars of grade fe-500d or more including carriages complete., structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished seamless type tubes, steel work weld
Tender For supply of r polypropylene random copolymer pipes 32 mm outer dia isi marked pn 16 sdr 7.4 uv stabilised and anti microbial fusion , all as per item no 20.00 here in before but of size 25 mm bore. , supply and fixing sluice valve flanged type 80 mm bore isi marked as per is 14846 2000 with valid cmlno. batch no. and manufacturer serial no. class pn 1.6 with brass spindle , all as per item no 22.00 here in before but of size 100 mm bore of pipe . , all as per item no 22.00 here in before but of size 150 mm bore of pipe . , all as per item no 22.00 here in before but of size 200 mm bore of pipe . , material and labour for ductile iron fittings for spigot socket ductile iron pipes such as bends any type radius and angle taper any type , supply and fixing cast iron air released valve with two air outlet is 14845 2000 dk fig 4 and fixing up in water main of 150 mm , construction of brick masonry valve pit of size 0.9m x 0.9m x 0.9m depth internal dimension , construction of brick masonry valve pit of size 1.20m x 1.20m x 0.9m depth internal dimension , m l for cement concrete 1 4 8 type d 2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete including demolition complete all as specified , m l for cement concrete 1 2 4 type b 0 using 12.5mm graded crushed stone aggregate as in coping of brick masonary including , m l for brick work with flyash bricks old size straight or curved on plan to any radius exc 6m , m l for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth on walls in cement mortar 1 4 complete all as specified and directed. , supply and fixing of gm globe gate valve suitable for 50 mm bore pipe with iron wheel head screwed both ends for iron ppr pipes isi marked , all as per item no 33.00 here in before but suitable for 40 mm bore pipe. , all as per item no 33.00 here in before but suitable for 25 mm bore pipe. , all as per item no 33.00 here in before but suitable for 20 mm bore pipe. , s f for straight plain brass ferrules or connecting screws screwed bolt ends of 20 mm bore pipe complete all as directed , all as per item no 37.00 here in before but of sizer 25 mm bore , returning filling in including spreading leveling watering well ramming in layers n. exc 25 cm thick complete all as directed. , removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. , wrecking crow bar or claw bar as per is 706 (q3)
Tender For material procurement for y n village camp anganavadi in gopanalu village in davnagere taluk - gopanalu/ add sundries charges at 2 % on material, gopanalu/ add handling , loading and unloading at 1% on material, gopanalu/ casurina poles 100 - 150 mm, gopanalu/ mason class i (with tools), gopanalu/ solid concrete block (40x15x20 cms)- 5.00 n/sqmm, gopanalu/ plasticizer / super plasticizer, gopanalu/ hom of vibrator 0.71 days, gopanalu/ mason class ii (with tools), gopanalu/ super plasticizer admixture is marked as per 9-103-1999, gopanalu/ formwork, centering & scaffolding for roof (straight & arched) - 50%, gopanalu/ formwork, centering & scaffolding for beams & lintels of building - 60%, gopanalu/ formwork, centering & scaffolding for columns & piers - 70%, gopanalu/ binding wire, gopanalu/ tmt bars fe 500, gopanalu/ add watering charges at 1 % on labour, gopanalu/ add sundries charges at 1 % on labour, gopanalu/ size stone 20 x 20 x 25 cms, gopanalu/ boulders, gopanalu/ mixer (concrete small used in culvert), gopanalu/ bond stone 20 x 20 x 45 cm, gopanalu/ add watering charges at 1 % on material, gopanalu/ mixer (concrete) - 1 cum capacity, gopanalu/ portland cement, gopanalu/ coarse sand (zone iii), gopanalu/ broken stone aggregate 12 mm to 10 mm size, gopanalu/ broken stone aggregate 20 mm size, gopanalu/ broken stone aggregate 40 mm size, gopanalu/ quarry spalls, gopanalu/ rubblestones, gopanalu/ add sundries charges at 1 % on material