Latest rubble Tenders | Government rubble Tenders

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

State Government

CTN :39256911

10 Mar, 2025 12.27 Lacs

Ernakulam - Kerala

Tender For corrigendum : dry rubble masonry work in the collapsed area of compound wall near manopilly nagar at thrikkakara campus..

State Government

CTN :39418321

28 Feb, 2025 15.66 Lacs

Sabarkantha - Gujarat

Tender For providing and laying rubble stone at down stream side of end sill of gorathiya recharge scheme at takar ta.talod dist.s.k

State Government

CTN :39390242

04 Mar, 2025 29.29 Lacs

Hoshiarpur - Punjab

Tender For providing, laying, jointing and fixing of pvc pipes 6kg/cm2 isi marked as per isi-4985 ( isi marked with prior approval of engineer-in-charge) casting along the trenches and laying the same in trenches to correct alignment and gradients, cutting. jointing and testing complete as per specifications . including specials and excavationa) excavation by mechanical means (for more than 3 mtr street width)pvc pipe 63mm o/dpvc pipe 75mm o/d pvc pipe 90mm o/d pvc pipe 110mm o/dpvc pipe 160mm o/db) excavation by mannual means (for more than 3 mtr street width)pvc pipe 63mm o/dpvc pipe 75mm o/ddismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting and including restoration of roads to orginal positionpvc pipe 63mm o/ddismantling of mattalled road and reconditioning of road cut in its original condition. (for road crossing)dismantling and re-fixing of interlocking tilepvc pipe 63mm o/ddismantling of cement concrete road and restoration in original condition complete in all respectproviding and fixing c.i/d.i flanged end stem of ss (ais 1410) and bronze (gunmetal) working parts sluice valves isi marked 14846-2000 including jointing,testing&costs of nuts and bolts & insertion of sheet, all carriage complete (with approval of engineer in charge (ivc/kirloskar/audco or equivalent make)80mm i/d100 mm i/d150 mm i/dconstruction of masonry sluice valve chamber excluding sluice valve cover as per standard design & drawings of public health size 0.6m x 0.6m0.9m x 0.9mmaking connection with existing pipe line "house service connections providing proposed water connection to house hold up to wall with providing, laying jointing, testing gi pipe lines 15mm i/d=2.50 mtr b- class ,( above gl), prov. & fixing mdpe pipe 15mm i/d with specials 2.00 mtr (below gl) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and isi marked 15mm i/d gm ferrule as per is: 2692 and 3"" i/d clamp with c.i bib cock 15mm i/d as per is:210 with stainless steel spindle of approved make as per ."carriage of material sandbajribricksextra of steel fe-500

CTN :39419926

13 Mar, 2025 NA

Jalandhar - Punjab

Tender For supply of insulation tape elect cotton self , bty dry 1 point 5v no 1 mc , box spanner sw 17 sw 19 , de spanner 12x13 mm , de spanner 5 by 16 x 3 by 8 bsf , de spanner 5 by 8 x 9 by 16 , ring spanner 10x11 mm , tyre lever , paint rfu fin ad br by spr syn ena azure black , paint rfu fin ad br by spr syn ena azure red , paint rfu fin ad br by spr syn ena azure yellow , hammer tinmans round and square face 4 , polish leather dark tan , oil linseed raw , cloth green blaze 137 cm as a table clo , plier round short nose 10mm , chalk frenchtechnical , cloth muslin white bleached 91 cm wide , axes pick digging head 1kg , desiccant silica gel , brushes flat paint 100mm tapered nylon , tape niwar undyed 100 mm , muslin white , chiesel ripping , cleaning powder , brush flat paint gs , soap woolen , paint rfu fin syn ena br sr mid stone og , scissors gen purpose 4 , hammer c w handle 0 point 3 kg , navatal lock 40mm 5 levers with key , nylon brush 50cmx60cm long , plywood for general purpose mr aa 5 ply , plywood for general purpose mr ab 5 ply , plywood for general purpose mr aa 7 ply , plywood for general purpose mr ab 7 ply , varnish protective , wire steel mild annealed 1mm , chisels cold fat carbon steel 20mm , soap liquid , dettol 100ml bottles

Central Government/Public Sector

CTN :39171274

26 Feb, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

State Government

CTN :39383263

03 Mar, 2025 84.62 Lacs

Nadiad - Gujarat

Tender For extracting & providing of rubble 15 cms. to 40 cms. size for govt. crusher from p.w.d. khadan to hoppers of government crushing plant at sevaliya

State Government

CTN :39243401

27 Feb, 2025 38.30 Lacs

Firozpur - Punjab

Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee makhu - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee makhu, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 with retro reflective h

State Government

CTN :39243441

27 Feb, 2025 30.15 Lacs

Firozpur - Punjab

Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee panje ke uttar - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee panje ke uttar, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 with

State Government

CTN :39243444

27 Feb, 2025 68.50 Lacs

Ferozepur - Punjab

Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee ferozepur cantt - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee ferozepur cantt, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 wit

Rubble Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors