Latest saddle Tenders | Government saddle Tenders

Central Government And Public Sector

CTN :45077185

02 Jun, 2026 NA

Bangalore - Karnataka

Tender For mushroom push button actuator, red colour spring return complete with contact block suitable for front connection having pressure type contact saddle andcapative screws legend plate and mounting screws and other accessories. the push button shall have 1 no + 1 nc contact and suitable for panel cutout of 30.5mm similar to telemechanique type -x b2-mc-41. note: 1. warranty 12 months from the date of commissioning or 18 months from the date of supply against any manufacturing defects. 2. authorised dealers/manufacturers shall quote. [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :45077377

20 May, 2026 NA

Dahod - Gujarat

Tender For supply of emu axle box safety strap for motor and trailer coaches to drg. no. emu/m-0-1-019/item 1 alt 'g'---- special condition : suitable packing to be done to avoid damage during transit, unloading and rust prevention during storage [ warranty period: 30 months after the date of delivery ]

CTN :45063494

23 May, 2026 NA

Bhawanipatna - Odisha

Tender For supply of cnc tools c c - shank twist drill- dia 8.2 , parallel shank twist drill- dia 8.3 , parallel shank twist drill- dia 8.4 , parallel shank twist drill- dia 8.5 , parallel shank twist drill- dia 8.6 , parallel shank twist drill- dia 8.8 , parallel shank twist drill- dia 9 , parallel shank twist drill- dia 9.4 , parallel shank twist drill- dia 9.5 , parallel shank twist drill- dia 9.6 , parallel shank twist drill- dia 9.7 , parallel shank twist drill- dia 9.8 , parallel shank twist drill- dia 9.9 , parallel shank twist drill- dia 10 , parallel shank twist drill- dia 10.1 , parallel shank twist drill- dia 10.2 , parallel shank twist drill- dia 10.5 , parallel shank twist drill- dia 10.6 , parallel shank twist drill- dia 10.8 , parallel shank twist drill- dia 10.9 , parallel shank twist drill- dia 11.4 , parallel shank twist drill- dia 11.5 , parallel shank twist drill- dia 11.8 , parallel shank twist drill- dia 12 , parallel shank twist drill- dia 12.2 , parallel shank twist drill- dia 12.4 , parallel shank twist drill- dia 12.5 , parallel shank twist drill- dia 12.6 , parallel shank twist drill- dia 12.8 , parallel shank twist drill- dia 12.9 , parallel shank twist drill- dia 13 , hss center drill- a3.15 x 8 , hss center drill- a2.5 x 6.3 , hss center drill- a4x10 , hss center drill- a5x12.5 , hss center drill- a6.3x16 , hss center drill- a2x5 , hand reamer- 4h7 , hand reamer- 5h7 , hand reamer- 6h7 , hand reamer- 8h7 , hand reamer- 10h7 , hand reamer- 12h7 , hand reamer- 14h7 , hand reamer- 16h7 , hand reamer- 20h7 , machine reamer- 16h7 , machine reamer- 18h7 , machine reamer- 20h7 , machine reamer- 3h7 , hand tap set- m4 x 0.7 , hand tap set- m5 x 0.8 , hand tap set- m6 x 1 , hand tap set- m8x1.25 , hand tap set- m10 x 1.50 , hand tap set- m12 x 1.75 , hss dies and die nut- m4 x 0.7 , hss dies and die nut- m5 x 0.8 , hss dies and die nut- m6 x 1 , hss dies and die nut- m8x1.25 , hss dies and die nut- m10 x 1.50 , hss dies and die nut- m12 x 1.75 , hss dies and die nut- m14 x 2 , hss dies and die nut- m16 x 2 , hss dies and die nut- m18 x 2.5 , hss dies and die nut- m20 x 2.5 , end mill cutter-solid carbide, dia - 3 , end mill cutter-solid carbide, dia - 4 , end mill cutter- solid carbide, dia - 5 , end mill cutter-solid carbide, dia - 6 , end mill cutter-solid carbide, dia - 8 , end mill cutter-solid carbide, dia - 10 , end mill cutter- solid carbide, dia - 12 , slot drill - solid carbide, dia - 5 , slot drill - solid carbide, dia - 6 , slot drill - solid carbide, dia - 8 , slot drill - solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 12 , ball nose cutter-solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 8 , ball nose cutter-solid carbide, dia - 6 , ball nose cutter-solid carbide, dia - 4 , chamfer end mill-solid carbide, dia - dia 10x90 degree , wood ruff cutter-hss, 19.5x6 , dove tail cutter-hss, 30x45 degree , lapping paste, 1 pkt - 400grm , round die handle - 1 inch , round die handle - 13 by 16 inch , round die handle - 1 and half inch , remear and tap handle - small , remear and tap handle - medium , remear and tap handle - large , dead blow hammer - 2lbs , oil stone triangular - 1 by 4 inch x 6 inch , parallal clamp - 6 inch , parallal clamp - 4 inch , dowel pin - dia 8x 50mm , dowel pin - dia 8x 100mm , dowel pin - dia 6x 45mm , dowel pin - dia 6x 30mm , dowel pin - dia 6x 50mm , toolmaker vice pin type - tmvp100 , goose neck clamp - ngc12 , //bid details 2 / 94 stepped strap clamp - nssc12-100 , moulding clamp- with clamping t-bolt and flanged nut - nmc-12t , step block - nsb-2 , adjustable supports plates - nasp-250 , single point cutting tool blank-hss - 1 by 2 inch x 1 by 2 inch x 6 inch , single point cutting tool blank-hss - 1 by 4 inch x 1 by 4 inch x 6 inch , face mill cutter - ygrd12-80z7c27b , face mill cutter - ygrd12-63z6c22b , face mill inserts - rdkt 12 04 mo

CTN :44971014

06 May, 2026 NA

Delhi - Delhi

Tender For bid to ras tender for supply of shackle no 1 mk3 leather , stirrup steel large 120mm , rope head , rope heel 3.2 mtr , surcingle su large , saddle su pattern 02 bar side shaped off , comb curry , saddle su pattern 02 bar stirrup steel , fringes brow band , bits bridoon pgs mk ii large , bag nose large , bucket lance su with arm

Central Government/Public Sector

CTN :44698679

06 May, 2026 1.39 Crore

Bhilai - Chhattisgarh

Tender For bid to ras providing of custom bid for services - various repair jobs of emd - overhauling/dismantling of the existing w ater drainer by isolating the drainer by putting blank plate after isolation valve. purging/removal of trapped gas from the seal pot/pipe line by injecting st eam/nit rogen. revisioning of all parts & cleaning of pot. if required, the complete seal pot w ith pipe line has to be new ly fabricated & erected as per the instruction of o.a. or as per draw ing. after erection, testing of pot by injecting st eam/nit rogen and de-isolation/commissioning. the condensate pipe from w ater drainers has to be laid to the nearest storm w ater manhole or as directed by o.a.s representative. painting of w ater drainer and pipes to be done after the erection job , "technical cleaning of gas pipeline water drainers. the w ork involves closing/blanking of valves, st eam purging of pipe/drain pot and opening of f langes of seal pot and removal of muck/deposit from pots, revisioning of gas inspection valve,w ater filling valves,condensate valves. fixing of new packing and tightening of f langes. filling of w ater in the seal pot and de-blanking of w ater drainer/opening of valves. checking for any leakages and rectification of the same " , the job involves cutting/dismantling of corroded structures like column, platforms, w alkw ays, staircases etc. at height. before cutting of any structure, the nearby pipe lines or any other equipment to be supported f irst. the dismantled structures should not be throw n from height. all the dismantled structure to be kept at one place as directed by o.a.s representative for disposal by bsp , the job involves fabrication of st eel structures like column, platforms, w alkw ays, staircases etc. by type 1 electrode, as per approved draw ing / specification or as directed by oa/oa¿s representative complete in all respect including painting. fabricated structures w ill have to be erected by the contractor at height as per the direction of operating authority , the job involves w elding of tack w elded pipes, gland compensators, disc compensators, flanges, st eel structures, gas pipeline equipment, plates, pipes, structures w ith type 1 w elding electrodes , dismantling of gas pipe line or any other pipe line by cutting, including handling and stacking, cutting into pieces and sections as directed by oa/oa¿s representative & stacking at designated location. before cutting the nearby pipe lines/platforms/equipment to be supported. all dismantled structural items to be kept at a particular place, as show n by o.a.s representative for disposal by bsp , job involves erection of fabricated/available pipes at locations show n by o.a./o. a' s representative, including dia. 100mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves,compensators, saddle supports etc. also to be erected, as directed by o.a , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 100mm and up to dia. 200mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. , fabricated/available pipes at locations show n by o.a./o.a. s representative, above dia. 200mm and up to dia. 500mm at heights. erection job involves, lifting of standard length of pipes supplied by bsp free of cost, w elding w ith the existing pipes/valve f langes and testing of pipe w ith st eam/nit rogen and defect rectification w ith type i electrode. any accessories like bleeder pipe, drainer pipe, purging nipples, valves, compensators, saddle supports etc.also to be erected, a

State Government

CTN :44231929

14 May, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

Central Government And Public Sector

CTN :44891395

21 May, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For corrigendum : 99 items of is group c001 - limk arms, diffusor, diffusor connection ring, lid nut, locking ring, canister lid gasket, canister connection assy, valve plate, screw fts st 4 8 x 13 a4, o-ring 34 2x3, o-ring 47 6x2 4 nbr bnm oc 10 x 88514-961, screw rts st 4 8x32a4, screw rts st 4 8x25a4, screw 4 8x25 a4, diffusor protection pocket, inlay foam, full face mask switch-over valve and hoses, visor, breathing hose sov ffm right epdm nm oc, push pad, cover hydrostatic valve, o-ring 30 0x3 0 nbr nm oc 10x88941-961, regulator 1, plug, adjustable nozzle assy, pressure gauge cover, bellows assembly, o-ring 18 0x4 0 epdm nm oc 10x88426-961, o-ring 20 8x1.6 nbr nm oc, o-ring 52 0x3 0, inflator- hose assembly, pressure relief disc, pressure relief cover, tension strap t-ladder 2 pack, cylinder holder left, cylinder holder right, relief valve 3 8-24 unf assy nm, o-ring 8 1x1 6 nbr nm oc 10x51015-9012, o-ring 4 3x2 4 fpm nm oc 10x88324-962, o-ring or30x3 5 1 pcs, mouthpiece assembly, neck strap, breathing hose sov ffm right epdm nm oc, dump valve, o-ring 6 3x2 4, buckle assembly, screw o-ring, o-ring, valve holder, o-ring 45x1 6, o-ring 33 0x2 0, spring 1 pcs, blind plug, locking strap 1 pcs, o-ring or31 5x30, mouth piece, regulator asembly, o-ring 6 1x 1 6, relief valve, o-ring, cover, screw assembly upper, screw assembly lower, canister lid, canister housing lid o-ring, pad, valve complete right, breathing bag, dosge valve complete, dosing handle assembly, doasge bypass lever, safety pressure unit, pressure gauge assy, high pressure hose assembly, o-ring 6 7x1 78 fpm nm oc 10x88486-961, hose nipple cover, hose bend restrictor, adapter, gasket, gauge nm, pressure gauge cover short, o-ring, inlet filter, spacer, sptring, inlet nipple, piston, locking clip, buckle holder with buckles long, buckle holder with buckles short 2 pcs, lock hose connector, bracket assembly for pressure gauge including screw assrmbl, hose guide including screw, safety valve house cxygen m26x2-m16x1, pressure relief handle, oxygen chassis, gauge hose, fomlube, o-ring 18 0x4 0 epdm nm oc

Central Government/Public Sector

CTN :45076181

14 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 35 )items as given below ,[1] disman damage steeltubular/rail/rcc pole 24.000 ea,[2] reprg broken,twisted & damaged lt poles 8.000 ea,[3] erect stay wire,7/10swg gi stranded wire 56.000 set,[4] erect galv. stay set complete,1.8mx16mm 32.000 set,[5] disman broken pole pl/damaged rcc pole 3.000 ea,[6] disman oh line,1ph,neutral&earth wire 24.000 ea,[7] disman oh line,3ph,neutrl,st.light phase 32.000 ea,[8] disman of acsr conductors from lt pole 72000.000 m,[9] disman of earth wire from lt pole 52000.000 m,[10] erect 6 swg gi continuous earth wire 6560.000 m,[11] erect 8 swg gi continuous earth wire 24000.000 m,[12] erect 10 swg gi continuous earth wire 1600.000 m,[13] erect acsr including supply of 9/6swg 1600.000 m,[14] erect galv. diron clamp,40x6mm,gi flat 160.000 set,[15] erect pole clamp with 50x6mm gi flat 32.000 set,[16] erect galv. ms earth clamp,380x40x6mm 32.000 set,[17] erect galv. ms stay clamp,380x40x6mm 32.000 set,[18] erect galvanize shackle strap,190x40x6mm 16.000 set,[19] erect 4x4.5 porcelain shackle insulator 16.000 ea,[20] erect 3x3.5 porcelain shackle insulator 112.000 ea,[21] erect 2x2.5 porcelain shackle insulator 112.000 ea,[22] erect ms structure/bracket,65x65x6mm 64.000 m,[23] fixg hexagonal type safety device w/4swg 800.000 set,[24] erect steel tubular pole,9m len approx 32.000 ea,[25] scrapg steel tubular pole by sand paper 64.000 ea,[26] disman outdoor termn of main feeder cbl 5.000 set,[27] remvg street light fitting frm pole hood 8.000 set,[28] transpt street light frm dept store-site 8.000 set,[29] fixg fluorescent light/mv/sv fitting 3.000 set,[30] fixg 63a aerial fuse to lt oh line 24.000 set,[31] erect 3 dia,gi pipe,return matl-store 3.000 set,[32] erect cradle guard 2xno.8swg gi wire 112.000 m,[33] attend no power/area charge total area 960.000 ea,[34] shiftg transformer frm bulk supply-site 5.000 ea,[35] pruning of tree branches fouling line 9600.000 ea

CTN :45057793

11 May, 2026 NA

Hyderabad - Telangana

Tender For supply of goal keeper dress , goal keeper gloves , t shirt shorts , playing kit , skin tight , wrist band , elbow pad , abdomen gd with strap

Central Government And Public Sector

CTN :45066469

02 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of auxiliary reservoir suspension strap along with m16 stud with nut and washer as per rdso drg no.wd-80007-s-12a, alt-20, item no.1. material and specification as per drawing. [ warranty period: 30 months after the date of delivery ]

Saddle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector