Latest safety belt Tenders | Government safety belt Tenders

Central Government/Public Sector

CTN :43317253

14 Jan, 2026 NA

Ankleshwar - Gujarat

Tender For procurement of spares of mahindra engine model- 48051a, 4905agmc2 and 275tu at ankleshwar - material supply, sensor unit temperature-pri (part no. 005551425r2), solenoid (electronic) nef genset (part no. 006028424h91), oil filter (part no. 006010197h1), belt alternator (part no. 005556085r1), gasket turbocharger mounting (part no.24018), fuel filter secondary (part no. 001081778r93-pb), safety air element 4575gm (part no. 006000790f1-pb), thermostat (part no.006028578b91 ), pump water (part no. 006003265a96), gasket cylinder head (part no.006015001v1 ), oil filter (part no.006017310b1-pb ), sensor temperature (part no.005551426r2), vdo oil pressure sensor cum switch (part no.006026403h91 ), oil cooler (part no. 006000756f1), gasket oil filter bracket (part no. 008000046f1), injector (part no.006000541f1 ), gasket thermostat housing (part no. 000021920e14), temperature sensor ksb (part no. e007700921b91), gasket thermostat (part no. 000020320e05), gasket cover to cylinder head (part no.006031554u1 ), gasket lub oil outlet-tc (part no.006000744b1 ), gasket intake manifold rigid mounting (part no. 006000651f1), alternator (part no.006023501h1), fan belt (part no. 006023818h1), thermostat assy. (part no.006033539c91), fuel filter with water separator (part no.006019433d1), pre fuel filter (part no.006021640h1), primary air filter element (part no. 006000789f1-pb), o ring (part no.000020381e05), oil seal front (part no. 000020369e05-pb), motor starter (part no. 005558084r91), oil filter (part no.006008803f1), gasket fip mounting (part no. 006000222f1), washer copper (part no.000020695e05-pb ), pipe o/f fip side (part no.006000920f1), banjo bolt (part no. 000020704e05), fuel injection pump (part no.006017943h1), vacuum solenoid valve (part no.006023478h91), egr ecu (part no.006023482h91), fuel pipe 200mm (one side banjo) (part no. 006023744h1), fuel pipe 200mm (part no. 006023745h1), fuel pipe 400mm (part no.006023746h1), silicone hose intercooler to intake manifold (part no. 0060244927h1), engine wiring harness (part no.006025013h1), washer copper temp. sensor (part no. 005550766r3), alternator (part no.007700751b91), gasket fip gear cover (part no.005554390r1), starter motor (part no.005558102r92), pump lube oil complete (part no.006005497h92-pb), gasket for oil filter (part no.001081753r2-pb), belt fan (part no.006004215b1-pb), gasket thermostat housing (part no. 000015490rd-pb), gasket thermostat housing cover (part no.003065125r2-pb), fuel injection pump (part no.006002989b92), injector complete with nozzle (part no.005556525r91-pb), solenoid (part no.006029642h91), gasket for oil cooler pipe flange (part no.000021720e11 ), clip hose pipe (part no.006004797f1-pb), clip hose pipe (part no.005555585r91-pb ), hose radiator bottom tank - radiator side (part no.006011903h1), injector (mico) (part no. 006009440h91), washer copper (part no.001081721r2), common harness (part no.006026543h91), 75kva switch safety high temp. (part no.006016281h1), other charges, packing and forwarding charges, freight upto ultimate consignee ( ongc stores, ankleshwar-393010), insurance

CTN :43290498

01 Jan, 2026 NA

Darjeeling - West Bengal

Tender For supply of 20mm , pvc elbow 20mm , pvc circular jn box 2 to 4 way , pvc shaddle clip with screw , ceiling rose pvc , pvc square block , tape insulation 10 mtr , mcb db spn 8 way double door 240 volts with bus bar , mcb 6 amps sp , mcb 20 amps sp , mcb spn 40 amps 240 volts , exhaust fan 300mm sweep with louver shutter , pendent holder made of bakelite , lcs with chemical earthing complete set as per brief tech specification , elect earthing set , hot water boiler of capacity 500ltrs as per brief technical specification , puf insulated 55mm thick water tank 1000 ltrs with gi flange for connection with nipple and gasket , water staging platform made of ms angle of size 40x40x6 mm , ppr pipe 20mm dia , ppr pipe 25mm , ppr tee 20mm , ppr tee 25mm , ppr elbow 90 degree 20 mm , ppr elbow 25mm , ppr elbow 90 degree 25mm , ppr male threaded socket 20 to 15 mm dia , ppr female threaded socket 20 to 15 mm dia , ppr female threaded elbow 20 to 15 mm dia , ppr male threaded elbow 20 to 15 mm dia , ppr socket 20mm dia , ppr socket 25mm dia , ppr union 20mm , ppr union 25mm , ppr reducer 25x20mm , ppr reducer tee 25x20mm , bib tap brass chromium plated sutable for 15mm ppr water supply line , ppr balve valve light weight brass 20 mm , pvc clip for ppr pipe 25mm dia , pvc clip for ppr pipe 20mm dia , ppr reducer elbow 25x20mm , ppr male threaded tee 25x20mm , pillor cock brass chomium plated 15mm ppr water supply line , taeflon tape , pvc float value heavy duty 25mm dia suitable for ppr pipe , 25mm pp-r tank connector , pvc pipe 4 inch dia 6 mtr long heavy duty type a having 5 kg pressure oblique sqcm , pvc socket 4 inch dia , pvc elbow 4 inch , pvc tee 4 inch , pvc floor trap 4 inch dia with grating 4 inch outlet , wash hand basin 500x400mm steel with waste pipe and coupling alongwith 02 nos ci bracket with screw pvc connection 450mm long , looking mirror size 450 x 600 x 5 point 5 mm thick with 4 mm ply backing and aluminium l section frame with nacessary hanging clips , stainless steel peg stay contains 4 hooks fancy type , soap dishes stainless steel size 10cmx12cm , towel rail cp 600mm long , plaster trowel with woodwen handle , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight 1 kg , double end spanner for 16 mm dia nuts and bolts , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size 710mm fitted as per technical specification , fish line , hammer ball pine 1kg , electric tile cutting machine with 5 nos inter changeable blades , measuring tape 3 mtr , gi sheet cutter scissors , transperant pipe 5 mm dia bore for water leveling , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work etc colour og oblique black , full body safety harness light weight designes with breathable open core padding technology that provides optimal air flow , gum boots for snow fall are , screw driver , portable drill machine with 06 nos 8mm dia bits , industrial safety helmet , prefabricated shelter structure for ffl of size 2 point 4m x 1 point 28m puf panels made of 40mm thick composite all as per drawing and schedule of structure part iv , non skid ceramic tiles of size 300 x 300 x 7mm , angle holder made of backelite lamp holder should be insulated type as per technical specification , surface plastic box suitable for modular switches and socket of 8 module , solid plate with base frame suitbale for surface plastic box of 8 module , pvc copper cable 1 sqmm single core wit multistranded conductor for earth wire in green colour , xlpe cable pvc insulated aluminium conductor served with //bid details2 / 104inner cross sectional area 10 sqmm 2 core as per tech specification , iwc vitreous ceramic china squatting pan size 580x 440 mm incl foot rests complete , pvc vent pipe 75mm dia 8 feet long with pvc cowl alongwith suitable arrangement for fixing , hdpe water tank cylinderical vetical with closed top 1000 ltrs with connector 20mm stop cock and float valve including r

CTN :43290804

02 Jan, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of safety belt for two point five ton , safety belt for als , purifier filter , water separator for two point five ton , two core cable two pont five sq mm

CTN :43256997

29 Dec, 2025 15.00 Lacs

Pali - Rajasthan

Tender For supply of nigam vehicle parts - tata ultra 1918/ ashok leyland avtar 1920 bs6 spare parts (engine), engine over haul gas kit, kit decarbonising gas kit, cylinder liner, bed plate, oil pressure relive valve, oil seal crain shaft rear, oil seal crain shaft front, oil sump assy. with drain plug, coolent tempreture sensor, crain sensor, knock sensor, gas kit oil pump, gas kit tresep chamber cover, tube breather, cylinder head cover, gas kit cylinder head cover, cylinder head gas kit, gear cam shaft, bearing cam shaft upper, bearing cam shaft lower, distance plate, cam shaft sensor, injector assy., hp connector, cap cam shaft bearing, rocker shaft assy. with pin, exhaust valve, rocker arm assy., crank shaft assy. without pin, gear crank shaft, pully crank shaft, set-piston assy., set-piston ring, connecting rod assy. with bush, set-bearing half upper/lower, assy. fly wheel ring gear, ring gear fly wheel, cam shaft, idler gear assy. -1, hub idler gear assy. -1, idler gear assy. -2, hub idler gear assy.-2, idler gear assy. -3, hub idler gear assy.-3, fuel injection equipment, fuel pr pipe assy. rail to inj-1, fuel pr pipe assy. pump to rail-5, gear, fuel injection pump, fuel injection pump assy., fuel rail assy., fuel pipe assy., fuel filter assy., fuel filter assy. without bracket, fuel filter element assy., air compressor, pipe assy. with ferrule, power steering pump assy., air compressor assy., kit gear driven comp minor repair, kit gear driven comp ring repair, kit gear driven comp piston repair, vane pump assy. - repair kit, assy.vane pump, shaft sub assy., cartridge assy., intake manifold, hose intercooler to intake manifold, tfm sensor, intake manifold, boost pressure sensor, exhaust manifold turbo charger assy., pipe assy.exh. manifold to egr valve, tube assy. egr cooler outlet to pump, pipe assy. turbo charger to inter cooler, exhaust manifold, throttle valve assy., hump hose turbo charger assy., pipe assy. egr coller to intake maniofold, tempreture sensor, egr cooler assy. with egr valve, egr vale assy., self starter and alternator, belt drive plain alternator, alternator 24 v, idler (drive plain-1), tensioner assy. (drive plain-1), starter motor 24 v, pully, drive and sheild assy., rotor assy., stator assy., rectifier, regulator, solenoid switch assy., drive assy., annulus, output shaft assy., armature assy., boll bearing, brush gear assy., relay assy., cable assy., oil cooler and oil filter, oil coller assy. with cover, centrifuge filter assy., tc oil supply line assy., oil filter assy., low oil pressure swtich, assy. stainer (for oil pump), oil return line assy., piston cooling nozzle assy., oil pump assy., assy. oil supply line (air compressure), kit centrifuge roter, kit centrifuge filter cover, water pump fan assy., assy. water pump, adapter rediator to water pump, cover assy. with tube thermostat, thermostat assy., fan pully, assy. fan with e-viscous clutch, water distribution rail assy., integral shaft bearing, air intake assy. mounting, suction pipe assy. complete, suction pipe assy., air duct assy., air filte assy., assy. air filter element (primary), assy. air filter element (safety), engine mounting, engine mtg arm front, engine mtg arm rear, engine wiring harness, injector harness, wiring harnees engine, belt tensionor, belt for drive, tensioner assy., tensioner bracket, engine suspension, rubber mtg front lh, rubber mtg front rh, rubber mount rear, clutch, assy. clutch cover, assy. clutch disk, clutch hosing, clutch release fork (ratio), clutch release fork (lock arrangment), clutch release bearing, bundy tube assy., kit master cylinder major, assy. clutch booter, major kit clutch booter, gear box, speed sensor, shifter fork (reverse), assy. drive shaft, taper roller bearing, main shaft, 2nd gear, synchro ring, engine gear (1st/2nd speed), assy. synchro cone, 1st gear m/shaft, synchro ring, engine gear (reverse), reverse gear m/shaft, 3rd gear m/shaft, synchro ring, 4th gear m/shaft, synchro ring, 5th gear m/s

CTN :43290653

12 Jan, 2026 NA

Guna - Madhya Pradesh

Tender For supply of fire blanket piece non asbestos , safety torch , belt safety full body harness , fireman suit three layer clothing fire , gloves hand for low temperature butyl , hand glove cotton , hand gloves heat resistance 350degree ce , jacket safety , dust mask hydrocarbon disposable , ear plug , safety goggles , goggles chemical splash protection , face shield for protection against radia , masking tape , plastic bin cabinet heavy duty rhino bin , supra bins sb 6 polypropylene tray , supra bins sb 7 polypropylene tray , can oil half pint , tape pvc insulated red 10m , tarpaulin canvas 12x15ft , tarpaulin canvas 36x18ft , bag poly self locking 6x8in , bag polythene self sealing 9 x12 in , bag polythene self sealing 14x18 in , wd 40 spray , aluminium tape , wire ss 304 0point8mm , shim ss 304 q 1mm , shim ss 304 halfmm , shim ss 304 0 point 8mm , shim ss 304 0 point 2mm , ss shim 0 point 05x500mm , ss shim 0 point 02mm , rod teflon 25mm 300mm , rod al 25mmx500mm , rod brass 25x300mm 1 point 59kg , plate ss a240 tp304 5mm , plate ss a240 tp304 3mm , plate ss a240 tp304 2mm , anabond grade 680 , loctite thread 243 55 deg c , hand pad scotch brite 7440 180grit 6x9in , paper emery grid size 120 , paper emery medium gr no 50 , paper emery silicon carbide fine 80c , cloth emery roll grade400 , cloth emery roll grade200 , spray belt dressing oks 2901 , rustoline half kg pack , tape taflon 0 point 75in , tape teflon roll halfin , cutter shim , cutter shim 10in , brush 4in with wooden handle ms , rope nylon halfin , pvc suit including hood pant gloves , boot gum pvc no 10 , boot gum pvc no 9 , jointing sheet neoprene rubber 3 mm , jointing sheet neoprene rubber 2mm , jointing sheet teflon 1mm , jointing sheet teflon halfmm , rope manila 1in

CTN :43272595

03 Jan, 2026 9.61 Lacs

Mathura - Uttar Pradesh

Tender For supply of retractable 7 m safety harness block , retractable 6 m safety harness block , antistatic full body safety harness , horizontal lifeline system for unloading bay no 01 , horizontal lifeline system for unloading bay no 02 , horizontal lifeline system for unloading bay no 03 , horizontal lifeline system for unloading bay no 04

State Government

CTN :43268250

05 Jan, 2026 10.00 Lacs

Jammu - Jammu And Kashmir

Tender For supply of safety helmet with torch , safety belts , army halogen , hand gloves , multipurpose storage adjustable shelf storage angle rack , tool kits , folding ladder , digital multimeter , pipe wrench , tong tester , wire stripper , pp rope , grease petrolium jelly , pvc tape , old saries , embry paper roll , plier , barrel pump , thimbles , hdpe pipe

State Government

CTN :42756412

29 Dec, 2025 NA

Rupnagar - Punjab

Tender For corrigendum : purchase of sports exercise physiology lab equipments - cardiopulmonary exercise testing system (including treadmill & cycle ergometer) (2 years warranty)(pac), portable telemetric metabolic analyzer for field and laboratory use.metabolic analyzer portable telemetric system for metabolic analysis should have the following specifications:designlatest generation, single body - weather and dust proof to suit our requirement of tough testing conditions. it should operate in standalone, holter and direct connection to pc modes.weight on subjectless than 1 kg including battery and ergonomically designed multi-size adjustable harnesstesting capabilitypulmonary gas exchange (vo2, vco2), vo2 max, sub-max vo2, thresholds (at, rcp), heartrate with hr belt, resting energy expenditure (ree, rmr), indirect calorimetry w/ face mask, substrates analysis (rq, %fat, %pro, %cho)analysis method breath by breathmotion sensorsinbuilt gps, altimeter, accelerometer (3d + 8g range), gyroscope (3d + 2000 o/s range) andmagnetometer/compass (3d + 1000 t range)wireless connectivitywireless data transmission: bluetooth 2.1 + edr class ii (range >900 meters line-of-sight)connectivityusb, audio, heart rate (aux), wireless device interface (bluetooth for integration with compatible optional peripherals like spo2, ecg etc.)data storagestorage: 512 mb flash > 2,000,000 breathsadditional: sd-hc card 32gb/fat32 - internal slot user accessibledisplay lcd: 3.5 lcd transflective colour - high visibility with led-backlit tfttouch-screen: resistive technology, that allows gloves and wet fingersanalysersoxygen: gfc 0-25% range, lifespan approximately 12 months (very easily user replaceable) response time 120 mscarbon-dioxide: digital ndir 0-10% range, response time 100 msbarometer: range -600 to +5500mflowmeter: bi-directional digital turbine ventilation range 0 to 300 l/min powerbattery: rechargeable li-ion smart battery w/ lcd charge status indicator. 2 packs backup battery: embedded to allow main battery replacement during testing without loss of datamain: 100-240v ac/dc adapter, for direct/main power supply and battery charging. essential accessories / consumablesthe system should be supplied with a compatible treadmill and ergo cycle as per specs below. list of standard items supplied and details of consumables including o2 sensor with their life span should be provided. a compatible laptop pc, colour deskjet printer, 3 litre calibration syringe & calibration gas mixture cylinder with regulator should be supplied with the systemquality assurancemust have european ce, us fda and iso certifications. treadmill running machine with user terminal (display & keyboard) stand- alone and remote control with cpet via rs232 running surface: l:170 cm (minimum), w: 65 cm (minimum) maximum possible load: 300 kg (660 lbs) speed range: 0-25 km/h elevation: 0 to 28% reverse belt rotation motor system 3.3 kw, single phase ac motor, maintenance free and brushless power transmission: frequency inverter, poly v - belt, very quiet operation safety arch should be provided with harness of 5(five) different sizes (small to large) safety system: emergency-off safety stop switch (safety lanyard with actuator, pull cord and clip); potential equalization bolt; transformer for potential-isolation from the mains ambient condition: temperature: +10 to +40 degrees c, humidity 30 to 70% display: touch screen display heartrate monitoring: wireless transmitter; the treadmill should be able to interface with well-known compatible metabolic gas analyzer as per standard and custom exercise protocols different programs para control software for pc must have ce certificationergo cycle functional design and excellent stability, load up to 160kg. easy to use saddle, handle bar and pedals speed independent and dependent power control handle bars are easy to change to suit different tests, rotatable by 360 degrees. mechanical/motor-assisted seat adjustment easy to control and calibr

State Government

CTN :42756413

29 Dec, 2025 NA

Rupnagar - Punjab

Tender For corrigendum : purchase of biomechanical equipments - isokinetic dynamometer (pac), should be able to access/test various joints in isolation should be able to meet requirements to test sports personsshould be able to test in different resistance modes such as isokinetic (concentric-concentric, concentric-eccentric , eccentric, concentric , and eccentric-eccentric), isotonic, isometric, and passive protocols should include options for angles, hold-times, rest period, repetitions, and sets. the system should be able to test all the major body segments and joints such as shoulder, forearm, elbow, wrist, hip, knee, and ankle.should have adjustable range of motion stops in full 360 degrees. should have 360-degree rotation for the force arm (connecting dynamometer to the pedal) to have wide range of motionshould be able to accommodate different athletes with varying height and weight with provision for seatbelt harness for better stabilitythe dynamometer or chair should be movable to accommodate different athletes for quick set-up and better usability with locking clamps for securing the system in place for testingshould be able to do gravity correction when the limbs are positioned with the lever arm on the dynamometerthe software should be provided to analyze the raw data and export the raw and processed data in different file formats such as excel, text, etc. the software should provide detailed report for various testing protocols such as individual test for joints, data/graph overlay for comparing pre and post testing, repeatability, progress, multi-session.should be provided with latest compatible workstation/laptop of reputed brand like hp, dell (latest generation) processor, minimum16gb ram, windows os 11, and laser printerconcentric speed: 500 deg/sec or more eccentric speed: 500 deg/sec or more concentric torque: 500 ft-lb (678nm) or more eccentric torque: 500 ft-lb (678 nm) or more isometric torque: 500 ft-lb (678 nm) or more isotonic torque: 500 ft-lb (678 nm) or more isotonic torque as low as .5 ft-lbfeedback formats: roadway, interactive line, interactive path, reaction training, proprioception training, breakout, and pong.torques. time, torques. angle, torque bars, work bars, power bars. it should be possible to use mechanical stops even with custom patterns (important for safety in research)the same attachment should be usable for left and right side of subject for consistencies in data.should be certified and approved by ce/eu medical devices directives or usfda