Latest safety cabinet Tenders | Government safety cabinet Tenders

State Government

CTN :38305449

19 Dec, 2024 NA

Dhanipur - Uttar Pradesh

Tender For corrigendum : . balance re-terracing of wing b & c, administrative & block, amu aligarh. ii. repair & re-terracing and painting works at receive & dispatch counter, administrative block, amu aligarh.

Central Government/Public Sector

CTN :38549897

10 Jan, 2025 2.59 Crore

Aizawl - Mizoram

Tender For supply of group tender of medical equipment for histopathology, pathology, microbiology and blood bank dept. - grossing station automated , microtome- fully automated , lab incubator , hot air ove , ph meter , hot plate , semi automatic microtome , esr analyzer , embedding station with hot & cold table & paraffin dispenser , tissue floatation bath , lab refrigerator , electronic balance , slide filing cabinet , block filing cabinet , centrifuge , microscope binocular , microscope binocular with illumination & photography , hematology analyzer-3 part , semi automatic coagulometer , fully automated coagulation analyzer , elisa reader with washer , vertical gel electrophoresis system , ultra deep freezer -80 deg c , cytospin , blood donor couch , blood collection monitor , dielectric tube sealer, handheld , refrigerated blood component transport box , (-40) degree deep freezer , vertical deep freezer - 20deg , ultra high speed centrifuge , plasma thawing bath , blood bank refrigerator , blood bag weighting balance- single pan , water bath , blood gas analyser , autoclave , bacteriological incubator , co2 incubator , anaerobic incubator , laminar air flow , bio safety cabinet class ii type b2 , ultrapure water purification system , fully automated colony counter , technical specification for compound microscope for microbiology

CTN :38552449

01 Jan, 2025 NA

Udhampur - Jammu And Kashmir

Tender For custom bid for services - repair of lo card of 40w jammer (libra)- the libra is manpack counter rcied electronics warfare systems which is suitable use for rop as well convey protection duties. this eqpt can act as a pre initiator as well as a neutralizer to provide enhanced protection to conveys and to movements to newer areas of responsibility. (i) made of operation p. n. j. (ii) purpose convey / rop (iii) area range 136-174 mhz (iv) code 5 digit (v) power o/p 40w (vi) range 400mtr (vii) power source 14.8v bty-msme exemption - yes | startup exemption - yes

CTN :38518066

19 Dec, 2024 NA

Gwalior - Madhya Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - fascia plywood , garden , counter , side wall , false ceiling , carpet , security guard , chair etc..

Central Government/Public Sector

CTN :38157116

27 Dec, 2024 1.30 Crore

Agra - Uttar Pradesh

Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) level indicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous

corporations/Associations/Others

CTN :38329893

19 Dec, 2024 1.83 Crore

Multi City - Karnataka

Tender For corrigendum : supply of the of gear & gear parts to nwkrtc. - dowling pin , carrier, assbly drum shaft 8.47, eicher plate holding, eicher rail gear shaft rev, eicher reverse jaw, eicher jaw gear shaft - 1, eicher rail 5/6, eicher rail 3/4, eicher jaw gear shaft, eicher assembly pin spring, eicher circlip, eicher cylinder roller brg, eicher o ring, eicher shaft, eicher washer rev idler, eicher 5th ms brg, eicher split pin, eicher bs-iii poppet terra 25, eicher bs-iii o ring , eicher bs-iii bushing shaft, eicher bs-iii bush cross shaft, eicher bs-iii pin lock for mini tower, eicher bs-iii selector lever, tata assembly housing block, m s 3rd gear , selector shaft - 3, selector shaft - 2, needle bush, spherical washer, thrust washer crown pinion, crown pinion set eicher, ball joint assembly rh, sub assembly ball joint - 2, selector pin, washer 4th/5th - 1, gear shifter milling bs-4 tc, sub assembly ball joint - 1, sub assembly ball joint, circlip crown, ball steel eicher, clutch relaser shaft, assembly case upper eicher, shim upper , washer g/s upper, thrust washer rev gear, eicher sensor ring, washer 4th/5th, eicher cone synchronisercro, gear change finger - 1, circlip kii, diff spider kit, companion flange , output flange, circlip - 5, spring pin - 1, synchroniser hub, lower pin ball terra, synchroniser assembly, poppet, circlip - 4, shifter shaft, selector and shifter shaft (rhd), assembly selector shifter fork with gear shifting lever, selector and shifter yoke, circlip - 3, circlip - 2, circlip - 1, circlip - 6, selector shaft - 1, s/a of detent plunger, gear side diff - 1, crown wheel pinion, crown wheel pinion - 1, ball joint r.h. - 2, upper pin ball terra, block terra, ring terra, ball terra, spring terra, poppet terra, inner fing terra, spring 2nd/3rd synchroniserchro, fork wear pad, gear box lock kit, bearing sleeve 4th/6th speed, synchroniser kit - 1, shifter shaft 1st/2nd - 1, shifter shaft 1st/2nd, clutch cone terra, detent spring, needle bush for gear lever kit, shifter shaft (3rd/4th speed) midi, circlip for 5th gear, circlip for 4th gear, circlip for 3rd gear, od selector plate, ms 4 gear bs-iv, fork, 2ndand3rd gear shift et40s6 , counter shaft for 6th gear (od gear) 6.71 ratio (et70s6) , constant mesh gear (6th gcs) 7.33 ratio (et70s6) , gear reverse idler , synchroniser ring - 1, clutch body ring terra 25 , bearing sleeve 5th gear et70s6 , reverse gear main shaft - 1, synchroniser hub , sleeve synchroniser 4th/ 5th , synchroniser hub 1st/2nd , synchroniser hub 2nd-3rd (hcv) , sleeve 2nd-3rd synchroniserchro (hcv), gear assemblynchroniser 6th (od) et 70s6 (6.71 ratio) , detent pin , lever, cross shaft bs-iii, od fork assembly-et70s6, synchroniser sleeve, synchroniser ring, circlip 2.2 thick, selector cable assembly, shifter cable assembly, circlip-2.5 thick, ball joint for gear shifter cable, spacer - 3, cross shaft, od gear on ms 21 teeth, drive assembly 6th gms, circlip 30, dp assembly 6.71 ratio, extended outer lever, ball joint, lever cross shaft srgsl, nut main shaft m30x1.5, brass pad midi, circlip 55 gb eicher, thrust washer 2nd gear, circlip 2.03 gb midi, service kit bushing, gmset 70s6 3rd, bearing sleeve 2nd gear, brg sleeve 2nd gms, thrust washer iii-iv gear, main shaft, assembly 4th 5th synchroniser sleeve, sleeve synchroniser, synchroniser assembly 2nd/3rd, synchronising assembly 1st/2nd, main shaft 2nd gear , main shaft 1st gear , nut main shaft m36x1.5, threaded pin gb60, synchronising ring (5th speed), fork gear shift 1st and 2nd, fork reverse et70s6 , main shaft 4th gear - 1, ball synchroniser, clutch body ring ring (hcv), driver pinion, main shaft 4th gear, counter shaft, c/s 4th gear, idler differancial, synchroniser repair kit, circlip kit - 1, assembly housing block - 1, brass pad, compression sparing bs-iii, shifter shaft 3/4th, spring pin, shifter fork 1/2/3/4 speed, shifter fork 1/2/3/4 speed - 1, assembly detend, forth speed gear - 1, constant mesh gear c/shaft - 1, oil slinger, roller

Central Government And Public Sector

CTN :38472025

27 Dec, 2024 NA

Rajkot - Gujarat

Tender For supply of bio safety cabinet class ii b

Central Government And Public Sector

CTN :38472065

27 Dec, 2024 NA

Rajkot - Gujarat

Tender For supply of bio safety cabinet class ii a

CTN :37637295

23 Dec, 2024 83.96 Lacs

Bangalore - Karnataka

Tender For corrigendum : supply of laboratory equipement - thermal cycler (pcr machine), electrophoresis, unit with gel casting gates, gel documentation (advanced model with ccd camera and id image analysis software), vertical deep freezer, vortex shaker, ice flake machine (capacity 150 kg), microwave oven, single beam spectrophometer, ph meter, magnetic stirrer, hot plate, biological safety cabinet, orbital shaking incubator, a. orbital shaking incubator with compressor, b. orbital shaking incubator without compressor:, additional platform for each: -, digital power pack 0-300v; 0-150ma (2 output) constant current constant voltage; digital display, digital timer, plant growth chamber, liquid nitrogen container (capacity: 50 liter), liquid nitrogen container, (capacity: 10.5 liter), binocular research microscope with led illumination and battery back-up, fluorescence and phase contrast microscope with mount adapter (included) its connected. with camera, hot air oven, ultra-low temperature freezer, refrigerated centrifuge, rotor lids, (685 ml tubes), centrifuge adapter, adapter, for 1 conical tube 50 ml. conical, rotor f-45-30-11, incl. rotor lid, for 30 x 1.5/2.0 ml reaction vessels., pipettes (2 sets), incubator orbital shaker with cooling cabinet and platform with digital controlling unit, spinner rotor, general purpose water baths , milli-q ultrapure & pure water purification system