Latest safety device Tenders | Government safety device Tenders

Central Government/Public Sector

CTN :40131320

06 May, 2025 NA

Bangalore - Karnataka

Tender For supply of gps antenna for 'fog safety device and fog pass adapter

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

CTN :39920839

28 Apr, 2025 NA

Jaipur - Rajasthan

Tender For bid to ras supply of tower bolts (ferrous metals) as per is 204 (q3) , pressure sensitive adhesive plasticized pvc tapes with nonthermosetting adhesive as per is 7809 (part 3 / section 1) (q3) , piano type non modular domestic fan regulator as per is 11037 (q3) , indoor end joint kit for xlpe cable 33 kv of size 300 sqmm , do fuse element 11kv 5 amp , straight through joint for xlpe cable 11 kv of size 240 sqmm , straight through joint for xlpe cable 33 kv of size 300 sqmm , fully automatic star delta starter in sheet enclose 15 hp motor rating ac 3 duty 415v 50hz 3 phase , cable junction box pvc for street light along with alum bus bar and provision of mcb installation , globe for harden light fitting 300mm , heatshrink cable end joint outdoor 11 kv 3 x 150sqmm xlpe cable , xlpe cable joint 11kv of size 120 185 sqmm 3 core ht cable straight through joint termination type , heatshrink outdoor end joint termination joint kit for 3 c x 300 sqmm 33kv xlpe cable , heatshrink cable end join outdoor 11 kv 3x 95sqmm xlpe cable , pvc back for chair varandah not less than 1 point 85 kgs , plywood commercial 8 feet x4 feet x 12 mm , plywood commercial 8 feet x4 feet x 6 mm , plywood commercial 8x4x19 mm , pvc seat for chair varanda with not less than 1 point 85 kgs , paint smoke grey og , looking mirror ladies size 1220x380x5mm thick make prima saintgobin modigurd , hydaulick system in best quality of chair revolving computer , pedestal bottom in best quality of chair revolving computer , twin wheel coasters in best quality of chair revolving computer , high precision telescopic channel made of mild steel 1point 25mm thick of 45kg capacity , supply only on load change over switch front operated switch disconector with extenderd shaft and ip 65 fp 400 amps 36 ka , supply only 3 phase automatic phase sequence corrector of 50 amp load capacity complete make abb , supply only 3 phase automatic phase sequence corrector of 20 amp load capacity complete make abb , xlpe cable alum conductor 3 core 300 sqmm 33 kv , 33 kv e 3 core 300sqmm standard aluminium conductor xlpe armoured cable , solar inverter 100kw , solar inverter 50kw , solar inverter 33kw , solar inverter 20kw , supply hi wall split air condition units in stone walls type split ac inverter model 5 star rating adheriing to specified bee 100 percent copper tubing and of capacity 2 point 0 tr , supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed input vairiation between 170v to 250v , refrigerators 310ltr doble door , led kerb stone of size 500mm x 150mm x 200mm made out of 5 foundation rods ensuring complete protection against theft and having a led strip of length 470mm with 22 nos led duly plastic coated of any , gaseous type gravity feed chlorinator of capacity upto 2 kg hrs chemical grade panel board 6mm thick 2 x 4 feet pvc primary filter safety gauge teflon pipe 5 rm ubend secondary filter , new empty chlorine gas cylinder 100kgs capacity along with all accessories , chlorine cylinder emergency safety kit on operating cylinders consist of following accessories cylinder valve hood assembly 01 set cylider valve cap with silver coating valve 01 set , self contained open circuit breathing apparatus with oxygen cylinderfor duration of 30 minutes with audio alarm system light weight fiber glass back plate and two stage pressure reducing , upvc pipes sch 40 with fittings onwalls ceiling or laying in floors of size 25mm complete all as specified and directed by engineer in charge , gaseous type gravity feed chlorinator of capacity upto 2 kg hrs chemical grade panel board 6mm thick 2 feet x 4 feet mounted consist of flow meter , new empty chlorine gas cylinder 100kgs capacity alongwith all accessories , self contained open circuit breathing apparatus with oxygen cylinder for duration of 30 minutes with audio alarm system light weight fiber glass back plate and two stage pressure reducing sys , solar street light 40 watt mad

corporations/Associations/Others

CTN :40121434

05 May, 2025 NA

Bhavnagar - Gujarat

Tender For supply of electrical safety devices and accessories (insulating mats for electrical purposes) as per is 15652 (q3)

CTN :40098132

14 May, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of 10 kva ups with two hrs backup , 5 kva ups with two hrs backup , cmptr 13 gen i7 processor with 32 gb ram , hdmi cable , vga cable , led tv 62 inches , people link camera and speaker , switch 24 port with 4 opticle port , utp cable cat 6 , power cable 9mm , 18u rack 24 inch deep , fire alarm system , biometric system , optical to ethernet convertor , audio system with 6 mics and surround sound speaker , projector , projector screen , 12 u rack

State Government

CTN :40095274

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc.

CTN :40104439

30 Apr, 2025 23.04 Lacs

Panchkula - Haryana

Tender For renovation of office building of sc-st commission, bays no. 49-52, sec.-2, panchkula (pdg. elv services i.e audio and video, cctv system, fire alarm system, lan system and epabx system only)