Latest sal wood Tenders | Government sal wood Tenders

State Government

CTN :40476182

31 May, 2025 NA

Chapara - Bihar

Tender For procurement of materials used in the schemes implemented under mnrega. - brick aggregate (single size):40 mm nominal size, stone aggregate(single size) : 40 mm nominal size, stone aggregate(single size) :20 mm nominal size, stone aggregate(single size): 10 mm nominal size brick bats, portland cement, white cement, block board construction flush door, with commercial ply on both faces, unslaked lime, satna lime, moorum, dry distemper, oil bound washable distemper/ acrylic, distemper, cement primer, distemper primer, pink primer (for wood), white cement based putty, black japan, enamel paint, roofing paint for iron sheets in red, colour, water proofing cement paint, plaster or paris, coarse sand (sone sand), fine sand, average rate of mild steel round bars, structural steel such as tees, angles,, channels and r.s. joists, flats up to 10 mm in thickness, steel glazed door, window/ ventilator,, all members viz, f7d, f4b, kll and, k12b etc., mild steel sheets for tanks, mild steel hooks, mild steel rivets, hard drawn steel wire fabric, galvanised steel bolts & nuts 6 mm dia, and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, galvanished steel bolts & nuts 10 mm, dia and 125 mm long round head with, slots, galva nished steel barbed wire, iron pintels including weldded pin, g.i lim pet washer 100, bitumen washer 100, 20 mm dia holding down bolts, mild st eel sheets with bolts and nuts to, rest on pintels, 18 mm t hick flamed finish granite stone, slab, g./. pipes 40 mm dia, r.cc pipes np2 class 300 mm dia, r.cc pipes np2 class 500 mm dia, r.cc pipes np2 class 600 mm dia, r.cc pipes np2 class 900 mm dia, r.cc collars np2 class 500 mm dia, r.cc collars np2 class 600 mm dia, r.cc coll~ np2 class 900 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, vitreous china flat back wash basin, 630x450 mm, vitreous china india type w.e. pan size, 580mm, vitreous china orrisa type w.e. pan size, 580mm, common burnt clay f.p.s. (non, modular) bricks class designation 7.5, common burnt clay f.p.s. (non, modular) bricks class designation 5.00, over burnt (jhama) brick aggregate:, 120 mm to 40 mm size, over burnt (jhama) brick aggregate: 90, mm to 40 mm siize, red oxide zinc chromate primer, coloured inter locking c.c. paver block, sand zone v (jamuna)/local sand, f.p.s. (non modular) clay fly ash bricks, class designation 7.5, 400 g polythene sheet, white marble raj nagar plain 18 mm, thick upto on ~o sqm area, , upvc pipes (working pressure 4 kg /, cm2 ) single socketed pipe 110 mm dia, upvcbend 87.50, 110 mm bend, plain ce iling tiles (bwp type phenol, formaldehyde synthetic resin bonded), 600x600x12 mm), semi perforated ceiling tiles, (600x600x12 mm), binding wire, boulder 50 mm to 200 mm, coloured inter locking c.c. paver block, acrylic exterior paint, metal primer (u.g.), vitrified floor tile 50x50 cm, vitrified floor tile 60x60 cm, vitrifies floor tile 80x80 cm, vitrified floor tile looxl00 cm, border tiles 2c\ox75 mm size, interlocking c.c. paver block (60 mm, thick, m30), high polymer modified quickset tile, adhesive, interlocking c.c. paver block (80 mm, thick, m-30), 80 mm thick m 40 cc paver block, 80 mm thick m 40 cc paver block, (white color), ready mix paint for steel work, ready mixpaint for wood work, tmtc 500 8 mm, tmtc 500 10 mm, tmtc 500 12 mm, tmt fe 500 16 mm, tmt fe 500 20 mm, steel doors and windows ready made, steel door with necessary hinges lugs, and glazing clips excluding other clips, excluding other fittings and their fixing, mild steel wire road 6 mm, steel channel, galvanised stet l corrugated sheets 0.63, mm th'ck l", galvanised steel corrugated sheets 0.50, mm thick, galvanised steel corrugated sheets 0.40, mm thick, galvanised steel corrugated sheets 0.35, mm thick, galvanised steel corrugated sheets 0.80 mm thick

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

CTN :40508238

18 Jun, 2025 NA

Kamrup - Assam

Tender For supply of construction material for bty comd post 8.06m x 6.02m x 3.40m as per technical specification and drawings attached , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 make birla gold or ambuja or ultratech or acc or jk or dalmiya , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone boulder 9 inch to 12 inch , water proofing compoundconfirming to is 2645-2003 make pidilite or dr.fixit or fevicol , hdpe sand bag og colour of size 15 inch x 30 inch , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5-2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw camouflage pattern , ismb hot rolled ms 200 x 100 3m maketata or sail or jsw , ismb hot rolled ms 200 x 100 4m make tata or sail or jsw , polythene sheet colour less and weight of sheet shall be not less than 70gm per sqm , pbs roll 20m long width of 0.9mtr isi marked with min weight of 34 kgs per roll , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm , shuttering and nails wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , lightning conductor air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make - presto or polycab or finolex , charcoal , slt , double sleeping bunk complete with plywood matress and all connected accessories all as per technical specification. , study chair of size length 56cm height 82 cm width 56 cm lacqured finish with arm seat and back cushion velvet holestry make supreme or equivalent , study table of size 4x2 wooden top on round tube structture with three drawers unit , steel bed side locker of size 1000mm x 1520mm x 450 mmcomplete with all accessories as per tech spec. , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts per hour , plastic dustbin of capacity 40 ltrs make neelkamal or cello or supreme. , solar system comprising of 1 x 500 watt monocrystaline pv panel 100ah solar bty min 550va ac or dc inverter with inbuilt mppt and charge controller equivalent , portable indoor type high quality kero heater metal body ignites type of continues heating duration min 8 hrs

CTN :40140977

29 May, 2025 NA

Bangalore - Karnataka

Tender For bid to ras bid to ras supply of sal wood - sal wood of size 8 feet x 4 inch x 3 inch , sal wood of size 8 feet x 4 inch x 1.5 inch , sal wood of size 8 feet x 3 inch x 3 inch , sal wood of size 8 feet x 3 inch x 1.5 inch , sal wood of size 8 feet x 2 inch x 2 inch , sal wood of size 8 feet x 2 inch x 1.5 inch , sal wood of size 8 feet x 8 inch x 1.5 inch

CTN :40513639

17 Jun, 2025 5.72 Lacs

Basti - Uttar Pradesh

Tender For construction c.c road in mohalla sarairafi ward no 13 pheena basti from saleem wood work to house of shri chunnu dhobi

Central Government/Public Sector

CTN :40477987

16 Jun, 2025 67.93 Lacs

Kolkata - West Bengal

Tender For supply of charge for removal of damaged bottom horizontal and vertical wooden fender as detailed in scope of work detailed under clause 2.ii , charge for in situ patch repair of fender holding frame plate and brackets plates in underwater condition as detailed in scope of work detailed under clause 2.iii , charge for supply of sal wood for renewal of damaged fenders as detailed in scope of work under clause 2.i , charge for renewal and fitting of sealing bottom horizontal wooden fender with the supplied timber as detailed in the scope of work under clause 2.iv , charge for renewal and fitting of sealing vertical wooden fender with the supplied timber as detailed in the scope of work under clause 2.v

State Government

CTN :40479178

02 Jun, 2025 NA

Kharagpur - West Bengal

Tender For construction of wood pilling beside hui pukur pond in ismailchak samsad, under chakmakrampur gram panchayat, kharagpur-ii block panchayat samity,jl no-426,plot no-.fund- 5th s. f.c. of 2024-25.

State Government

CTN :40479377

02 Jun, 2025 NA

Kharagpur - West Bengal

Tender For construction of wood pilling from mirjapur bilpukur to jame masjid in baghageria samsad, under chakmakrampur gram panchayat, kharagpur-ii block panchayat samity,jl no-592,plot no-. fund- 5th s. f.c. of 2024-25.

State Government

CTN :40479648

02 Jun, 2025 NA

Kharagpur - West Bengal

Tender For construction of wood pilling beside worda sitala mandir pond in worda samsad, under chakmakrampur gram panchayat, kharagpur-ii block panchayat samity,jl no-443,plot no-. fund- 5th s. f.c. of 2024-25.

CTN :40187538

28 May, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk or dalmiya under job no 2502 mmg bkr as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40-63 mm graded , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , water proofing compound confirming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9 mtr isi marked with min weight of 34 kgs oblique roll , cement based paint snowcem make-berger , asian , nerolac , synthetic paint enamelled og confirming to is 5-2004 make-berger , asian , nerolac , synthetic paint enamelled brown confirming to is 5-2004 make-berger , asian , nerolac , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make-berger , asian , nerolac , loop holes 1000 x 300 mm make-tata , sail , jsw , ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , ms binding wire tata , sail , jsw , ismb hot rolled ms 125 , 4000mm long make-tata , sail , jsw , ismb hot rolled ms 125 , 1200mm long make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , prefab mild steel door of size 900x1700 , outer frame made out of isa 40x40x6mm and door shutter frmae of isa 35x35x5mm and all stiffner isa 30x30x3mm. steel shall conform to is-800 make-tata , sail , jsw , hdpe sand bag og colour of size 34 inch x 14 inch , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , preferb folding double sleeping sleeping bunks made of ms columns 65x65x6 mm and ms plate from made of isa 40x40x6mm , hold fast make-tata , sail , jsw as per store list attached , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , nails various size , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , drilled with 2 nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12 mm dia and 300 mm long , gi pipe 40 mm dia light grade make-jindal , tata , kalinga , gi pipe 20 mm dia light grade make-jindal , tata , kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make-presto , polycab , finolex , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe make-jindal , tata , kalinga , galvanized iron strip 32 x 6 mm

Sal Wood Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

State Government

State Government